Mercury oil filters
Tuoteryhmät
Mercury oil filters -ryhmän tuotteet
Oil filter Mercury 8M0162831
Genuine Mercury oil filter that fits 4-stroke 9.9–30hp Mercury outboard motors.
The oil filter should always be replaced when the oil is changed and in accordance with the engine manufacturer's instructions. Lightly lubricate the sealing ring with engine oil before installation to ensure proper seating of the filter.
Fits the following engines (serial numbers):
- 9.9hp EFI ProKicker 2-cyl (333cc) – 1R008146–1R278792
- 10hp EFI 2-cyl – 0R833820 and newer
- 10hp sidecar model 2-cyl – 0R575531–0R833819
- 15hp EFI 2-cyl – 0R833820 and newer
- 15hp EFI SeaPro 2-cyl – 0R833820 and newer
- 15hp sidecar model 2-cyl – 0R235949–0R833819
- 15hp sidecar model JCI 2-cyl – 0R558208–0R833819
- 20hp cosaari model 2-cyl – 0R235168–0R833819
- 20hp EFI 2-cyl – 0R833820 and newer
- 25hp SeaPro gas engine model – 0R051710 and newer
- 25hp EFI 3-cyl – 0R106999–1R162636
- 25hp EFI Jet 3-cyl – 0R165086–1R162636
- 25hp EFI 3-cyl – 1R154758 and newer
- 25hp EFI SeaPro 3-cyl – 1R154758 and newer
- 25hp EFI Jet 3-cyl – 1R154758 and newer
- 30hp EFI 3-cyl – 0R106999–1R162636
- 30hp EFI 3-cyl – 1R154758 and newer
OEM number: 8M0162831
Previous OEM number: 822626Q03
Genuine Mercury spare part ensures reliable operation and long service life of the engine. Available from Seasea Marine Store.
- Mercury F9.9-F30
- Old product number 822626Q03
- Yamaha 15-60 HP
- Honda 8-50 HP
Oil filter remover for Mercury and Mariner four-stroke engines.
Fits 9.9 hp (1999-2004) and 15-115 hp models with serial numbers 1B366822 and lower and 2B094996 and higher.
The puller also works with OMC engines: 9.9–15 hp model year 1995, 70 hp model year 1998, and 150–225 hp model year 1999.
Original part with OEM number 802653Q02.
- Filter remover
- For oil filter
- Original part
Air filter Mercruiser CMD QSD 4.2
Genuine Mercruiser branded air filter. Fits Mercruiser CMD QSD 4.2 engines — however, please check that the power and serial number are listed below.
Make sure you replace the air filter according to your engine's maintenance requirements (see your owner's manual). A clogged air filter can prevent the engine from getting enough air.
OEM number: 898272048
Fits the following engines and serial numbers:
- CMD QSD 4.2 ES/EI 270 — serial numbers 88400000 – 88404999
- CMD QSD 4.2 ES/EI 320 — serial numbers 88405000 – 88416999
- CMD QSD 4.2 ES/EI 350 — serial numbers 88416000 – 88419999
- Air filter
- Fits: Mercruiser CMD QSD 4.2
- Original spare part
Orbitrade oil filter
Orbitrade Marine oil filter, suitable for Yamaha outboards in the 150–250hp power range, as well as the Mercury 225 EFI engine. A high-quality and reliable alternative to the original filter.
The oil filter should always be replaced when changing the oil and in accordance with the engine maintenance instructions.
Replaces the following OEM numbers:
- Yamaha: 69J-13440-00
- Mercury: 822626T7, 822626Q15
Suitable for the following engines:
- Yamaha F150 04–06
- Yamaha F200/F225 02-06
- Yamaha F250 05–06
- Mercury 225 EFI (serial number 0T653945 and later)
- Oil filter
- Yamaha / Mercury
- Thread: 3/4"x16NPT
Mercury Mercruiser oil filter. Replace the oil filter according to the recommendations for your engine. This genuine spare part fits D7.3L D-tronic engines with serial numbers: 0L050050-0L391832.
Information:
- OEM number: 862889
- Weight: 1.0 kg
- Length: 26.92 cm
- Width: 14.22 cm
- Height: 13.46 cm
- Oil filter
- Sopii: Mercruiser D7.3L D-tronic
- Original part
Oil filter kit for Mercury Mercruiser transmission
Replace the oil filter according to the manufacturer's recommendations for your transmission. An O-ring is included. This genuine part fits both mechanical and electronic transmissions in the 63 series, 630 series and 800 series, which are installed on a variety of Mercruiser engines, including:
- 3.0L TDI 100SD & 230SD/IB & 260SD/IB (all serial numbers)
- TDI 4.2L 335 & 370 (serial number CMC000200 and above)
- 6.2L (serial number 2A456613 and up)
- 8.1L (serial number 1G300000-1G300884 & 1G700000-1G701415)
- 8.2L (serial number 1A350802 and up)
Suitable for the following Hurth gearboxes: 63, 63A, 63IV, 68A ZF63, ZF63A, ZF63IV, ZF68A 630A, 630V, 800A HSW 630 A, HSW 630 V, HSW 800 A with or without DTS (electronic shift).
Specifications:
- OEM number: 879194241
- Weight: 0.9 kg
- Length: 7.62 cm
- Width: 7.62 cm
- Height: 5.4 cm
- Oil filter set
- Fits Mercruiser transmission models: ZF63, 630 and 800
- Original spare part
Oil filter MerCruiser CMD QSD 2.0
Genuine Mercury MerCruiser oil filter, with filter and housing in one unit. Fits many 2.0L diesel engines. Check the list below to see if your engine is compatible or verify the OEM number before ordering. Gaskets are included in the package.
The oil filter should always be replaced when changing the oil and in accordance with the engine manufacturer's maintenance instructions.
Suitable for the following engines:
- CMD QSD 2.0 EI 115 (serial numbers 88200499-88500999)*
- CMD QSD 2.0 EI/ES 130 (serial numbers 88205099-88205999 and 88206399-88219999)*
- CMD QSD 2.0 EI/ES 150 (serial numbers 88220299-88220999 and 88221799-88229999)*
- CMD QSD 2.0 EI/ES 170 (serial numbers 88230000-88239999)
- 2.0L EI/ES 115 (serial numbers 70294910-70377490)
- 2.0L EI/ES 130 (serial numbers 70000000-70002129 and 70002130-70015639)
- 2.0L EI/ES 150 (serial numbers 70015460-70017409 and 70017410-70024869)
- 2.0L EI/ES 170 (serial numbers 70024870-70026629 and 70026630-70105129)
Note: Always check the engine serial number, OEM number or dimensions. Some engines may use a different oil filter, part number 81993.
Specifications:
- OEM number: 879312041
- Weight: 0.0855kg
- Length: 10.795cm
- Width: 9.525cm
- Height: 8.255cm
A genuine MerCruiser spare part ensures reliable engine operation and long service life.
- Oil filter
- Fits: Mercruiser CMD QSD 2.0
- Original spare part
Oil filter from Mercury Mercruiser that fits many 2.5 liter TDI and SDI diesel engines. Make sure your engine is on the list below, or the oil filter OEM number is the same as the old filter.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. An O-ring is included.
Suitable for the following engines:
- SDI 55 (serial number BCT001003 and up)
- SDI 75 (serial number BCT001003 and up)
- TDI 100 (serial number BCU001803 and up)
- TDI 120 (serial number ANG001002 and up)
- TDI 140 (serial number ANH001009 and up)
- TDI 150 (serial number ANH002044 and up)
- TDI 165 (serial number BTW000900 and up)
Specifications:
- OEM number: 8M0066965
- Weight: 0.078 kg
- Length: 17.145 cm
- Width: 7.62 cm
- Height: 6.985 cm
- Oil filter
- Fits: Mercruiser TDI 100-165 and SDI 55-75
- Original spare part
Oil filter from Mercury Mercruiser, suitable for TDI 3.0L and TDI 4.2L engines. Make sure your engine is listed or the oil filter OEM number matches.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. An O-ring is included.
Suitable for the following engines:
- TDI 3.0L 100 (serial number BSP000904 and up and CEZ000201 and up)
- TDI 3.0L 225 (serial number BSP000904 and up and CEZ000201 and up)
- TDI 3.0L 230 (serial number CEZ000201 and up)
- TDI 3.0L 265 (serial number CEZ000201 and up)
- 3.0L TDI 100 SD (all)
- 3.0L TDI 230 IB (all)
- 3.0L TDI 230 SD (all)
- 3.0L TDI 260 IB (all)
- 3.0L TDI 260 SD (all)
- TDI 4.2L 335 MIE (serial number CMC000200 and up)
- TDI 4.2L 335 MCM (serial number CMC000200 and up)
- TDI 4.2L 370 MIE (serial number CMC000200 and up)
- TDI 4.2L 370 MCM (serial number CMC000200 and up)
- TDI 4.2L (serial number CEM001042 and up)
Specifications:
- OEM number: 8M0066483
- Weight: 0.17 kg
- Length: 10.922 cm
- Width: 10.922 cm
- Height: 20.32 cm
- Oil filter
- Fits: Mercruiser TDI 3.0L and TDI 4.2L
- Original spare part
Oil filter from Mercury Mercruiser that fits 4.3L V6 inboard engines with carburetors. Make sure your engine is listed or check the OEM number of the oil filter.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. Lubricate the O-ring with oil before installation.
Suitable for the following engines:
- 4.3L Carb (serial number 0M615000 and up)
- 4.3L Gen+ (serial number 1G400000-1G416776)
- 4.3L Alpha 4V (serial number 1G417302-1G499999)
Specifications:
- OEM number: 883702K
- Weight: 0.272 kg
- Length: 8.382 cm
- Width: 8.128 cm
- Height: 9.652 cm
- Oil filter
- Fits: Mercruiser 4.3L
- Original spare part
Oil filter for Mercury Mercruiser, suitable for a range of engines including 530 D-TA, 636 D-TA, D183, D219, D2.8L, D3.0L, D4.2L, CMD 2.8 and CMD 4.2. Please check that your engine is listed or check the OEM number of the oil filter as alternative oil filters may be available for your engine.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. Lubricate the O-ring with oil before installation.
Suitable for the following engines:
- 530 D-TA (serial number 0B993002-0D725151)
- 636 D-TA (serial number 0B993002-0D850127)
- D183 Turbo AC (serial number 0B993002-0D725151)
- D219 Turbo AC (serial number 0B993002-0D850127)
- D2.8L/165 D-Tronic (serial number 0K144109-0M999999)
- CMD 2.8 EI/ES 165 (serial number 88005001-88005167)
- D3.0L (serial number 0F306930-0F999999)
- D3.6L (serial number 0F306930 and up)
- D3.6L W (serial number 0K000001 and up)
- D4.2L/200 LD (serial number 0L344381-0M999999)
- D4.2L/220 IDI (serial number 0F450250-0M999999)
- D4.2L/250 D-Tronic (serial number 0K144114-0M999999)
- D4.2L/300 D-Tronic (serial number 0L667439-0M999999)
- CMD 4.2 ES 150 (serial number 88070334-88070344)
- CMD 4.2 MI/MS 200 (serial number 88020001-88020166 and 88020200-88030000)
- CMD 4.2 MI/MS 230 (serial number 88030001-88030344 and 88030400-88040000)
- CMD 4.2 EI/ES 250 (serial number 88040001-88040508 and 88040600 THRU 88050000)
- CMD 4.2 EI/ES 270 (serial number 88060001-88070000)
- CMD 4.2 EI/ES 300 (serial number 88050001-88050643 and 88050800-88060000)
- CMD 4.2 EI/ES 320 (serial number 88070001-88080000)
Note the engine serial number, for CMD/QSD 2.8 or 4.2 engines with integrated oil filter, part number 81993 should be selected instead. Also note the engine serial number, an alternative filter is available with part number 81999.
This filter is not suitable for TDI engines with V6 or V8, see part number 81996 instead.
Specifications:
- OEM number: 19485
- Weight: 0.68 kg
- Length: 19.253 cm
- Width: 11.43 cm
- Height: 11.43 cm
- Oil filter
- Fits: Mercruiser 530 D-TA, 636 D-TA, D183, D219, CMD 2.8 & 4.2mfl
- Original spare part
Oil filter for Mercury Mercruiser, suitable for engines D254, D3.0L, D3.6L and D4.2L. Make sure your engine is listed or check the OEM number of the oil filter.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. Lubricate the O-ring with oil before installation.
Suitable for the following engines:
- D254 Turbo AC (serial number 0C849461-0D554731)
- D3.0L (serial number 0D725152-0F306929)
- D3.6L (serial number 0D850128-0F306929)
- D4.2L/220 IDI (serial number 0D554732-0F450249)
Please note that this filter is designed for straight-in engines and is not suitable for V6 or V8 engines. For these engines, part number 81996 is available.
Specifications:
- OEM number: 816168
- Weight: 0.68 kg
- Length: 18.796 cm
- Width: 10.414 cm
- Height: 10.414 cm
- Oil filter
- Fits: Mercruiser D254, D3.0L, D3.6L and D4.2L
- Original spare part
Oil filter Mercury 877767K01
Genuine Mercury oil filter, specifically designed for Verado 4-cylinder 135-200hp outboards. The oil filter should always be replaced when the oil is changed and in accordance with the engine maintenance instructions. Lightly lubricate the sealing ring with engine oil before installation to ensure the filter seals properly.
Fits the following engines (serial numbers):
135hp EFI Verado 4-cyl.
- 1B517159–2B576734
- 0P514869–0P593020
150hp EFI Verado 4-cyl.
- 0P514869–0P593020
175hp EFI Verado 4-cyl.
- 0P514869–0P593020
200hp Verado 4-cyl.
- 0P514869–0P593020
OEM number: 877767K01
Previous OEM number: 877767Q01
Genuine Mercury spare part ensures reliable operation and long service life of the engine. Available from Seasea Marine Store.
- Original spare part
- Fits: Mercury Verado 135-200hp
- 877767Q01
Oil filter for Mercury engine, original part with OEM number 877769Q01. Fits Mercury Verado engines with 6 cylinders and power range 200-300 hp.
- Original spare part
- Fits: Mercury Verado 200-300hp
- 877769Q01
Oil filter, located in the line between the oil tank and the oil pump
It is located near the bottom of the oil tank. The filter is found on most Mercurys with DFI (called Optimax and Pro XS for example), as well as some older 2-strokes with EFI.
DFI stands for Direct Fuel Injection and EFI stands for Electric Fuel Injection. What both technologies have in common is that they replace the traditional carburetor. DFI is the most modern solution, where fuel is injected directly into the cylinder at very high pressure, this technology can be found in Optimax engines, among others. EFI came earlier and is more efficient than a carburetor, but mixes the fuel with the air before it reaches the cylinder. If you have an Optimax, you have a DFI engine, which is the most efficient solution for 2-stroke engines. Change the oil filter according to the recommendations given for your engine.
This genuine Mercury part fits the following engines:
- 75 DFI (3 cyl. 1.5 l) - serial number 0T980000 and up
- 80 Jet (3 cyl. 1.5 l) - serial number 1B586067 and up
- 90 DFI (3 cyl. 1.5 l) - serial number 0T801000 and up
- 110 Jet (2.5L) - serial number 1B690542 and up
- 115 DFI (3 cyl. 1.5 l) - serial number 0T801000 and up
- V-115 DFI (2.5L) - serial number 0G960500-0T178499
- 115 Pro XS (3 cyl. 1.5 l) - serial number 1B751825 and newer
- 125 DFI (3 cyl. 1.5 l) - serial number 1B736885 and newer
- V-135 DFI (2.5L) – serial numbers 0G960500 and later
- V-150 DFI (2.5L) – serial numbers 0G960500 and later
- 150 Pro XS (2.5L) - serial number 1B690542-2B535572
- V-150 EFI (2.5L) – serial numbers 0T409000 and up
- V-175 DFI (2.5L) – serial numbers 0T178500 and later
- 175 Pro XS (2.5L) - serial numbers 1B516339-2B535624
- V-175 EFI (2.5L) - serial numbers 0T409000-0T800999
- 200 DFI (3.0L) - serial number 0G960500-2B535571
- 200 DFI (3.0L DTS) – serial number 0T980000 and up
- 200 Pro XS (3.0L DFI) - serial numbers 1B504989-2B535571
- 200XS DFI (2.5L) - serial numbers 0T235000-1E002110 and 1E050852 and up
- V-200 EFI (2.5L) - serial numbers 0T409000 and up
- 200 EFI (3.0L) - serial number 0T750164-2B528096
- 200XS SST (serial number 1E050629 and later)
- 225 DFI (3.0L) - serial number 0G960500-2B535086
- 225 DFI (3.0L DTS) – serial number 0T599000 and newer
- 225 Pro XS (3.0L DFI) – serial number 1B104549-2B535608
- 2.5XS DFI (2.5L) - serial number 0T997974-1E000796
- 225 Sport XS (3L) - serial number 1E000797 and later
- 225 EFI (3.0L) - serial number 0T750164-2B528096
- 225 EFI Seapro (3.0L) - serial number 0T801000-1B417701
- 225X EFI Promax - serial number 0T430254-0T819605
- 225XS – serial number 1E002584 and later
- 3.0L EFI Marathon - serial number 0T409000-0T800999
- 3.0L EFI Seapro - serial number 0T409000-0T800999
- 225 EFI Marathon (3.0L) - serial number 0T801000-1B417701
- 250 DFI (3.0L) - serial numbers 1B528615-2B535086
- 250XS DFI (3.0L) – serial numbers 0T651945-1E051113 and 1E053158 and newer
- 250 Pro XS (3.0L DFI) - serial numbers 1B426561-2B535608
- 250 EFI (3.0L) - serial number 0T409000-2B528096
- 250 EFI Long (3.0L) – serial number 0T861319 and up
- 250 Sport XS - serial numbers 1E002342-1E052994
- 300XS DFI (3.2L) – serial number 1E001867 and newer
- 300X EFI Promax (3.0L) - serial numbers 0T235084-0T999587
- P DFI (3.0L) – serial number 0T997974 and newer
- DSI (3.0L) - serial number 1E052967 and newer
- Corresponds to OEM numbers: 875284T01, 875284001 and 875284
- Weight: 0.007Kg
- Length: 5.423cm
- Width: 5.397cm
- Height: 5.397cm
Oil filter from Mercury, original part with OEM number 8M0162829. Fits Mercury 4-stroke 25-115hp outboard motors.
- Original part
- For Mercury 25-115hp
- OEM No.: 8M0162829
Oil filter from Mercury, original part with OEM number 877761Q01. Fits Mercury 4-stroke 75-150hp.
- Original part
- For Mercury 75-150hp
- OEM No.: 877761Q01
Oil filter MerCruiser 866340Q03
Genuine Mercury MerCruiser oil filter that fits most 4, 6 and 8 cylinder MerCruiser engines. Please check the list below to see if your engine is compatible or verify the OEM number before ordering.
The oil filter should always be replaced when the oil is changed and in accordance with the engine manufacturer's instructions. Lightly lubricate the sealing ring with engine oil before installation to ensure proper sealing and secure installation.
OEM number: 866340K01
Previous OEM numbers: 866340Q03,866340Q02,802885T,802885,802885Q,14957,52731
Fits a very wide range of MerCruiser engines, including:
- 2.5L, 3.0L and 3.7L four-cylinder engines
- 4.3L V6 engines
- 4.5L,5.0L and 5.7L V8 engines
- 6.2L,6.3L,7.4L,8.1L and 8.2L engines
- Alpha, Bravo and inboard configurations
- Carburetor, EFI, MPI and TBI versions
Compatibility covers a wide range of MerCruiser engines from multiple model years. Exact engine compatibility is determined by engine type and serial number.
Genuine MerCruiser oil filter ensures reliable engine operation and long service life. Available from Seasea Marine Store.
Oil filter from Mercury Mercruiser, suitable for D1.7L DTI and CMD 1.7 120 engines. Make sure your engine is listed or the oil filter OEM number matches.
Always replace the oil filter when changing the oil and follow the recommendations for your engine. An O-ring is included.
Suitable for the following engines:
- CMD 1.7 MI 120 I/L4 (serial number 88109041 and up)
- CMD 1.7 MS 120 I/L4 (serial number 8810800 and up)
- D1.7L DTI (serial number 0M055000-0M999999)
Specifications:
- OEM number: 8M0150917
- Weight: 0.102 kg
- Length: 10.16 cm
- Width: 8.585 cm
- Height: 8.585 cm
- Oil filter
- Fits: Mercruiser D1.7L DTI and CMD 1.7 120
- Original spare part
