Monitoring Systems

Sensor tape kit for Gobius and Gobius Pro. This kit contains everything you need to install the Gobius and Gobius Pro sensors in a tank. The 3M tapes included are essential for attaching the sensor to a new tank or replacing old tape, for example. The kit includes four 45 mm 3M VHB tapes, a cleaning wipe and instructions in Swedish and English.

Follow the instructions carefully to remove and reattach the old sensor using the tapes provided. Use only these 3M tapes to ensure a safe and correct installation.

Gobius C Basic wireless tank gauge

Gobius C Basic is a smart and wireless plug and play tank gauge that is installed outside the tank without drilling or risk of leakage. The tank does not need to be dismantled, and the measurement is done accurately from the top of the tank.

Suitable for measuring the level of water, fuel, greywater and waste tanks.

Operation and installation

The sensor uses microradar technology to measure through plastic and fiberglass tanks. A separate Gobius C adapter is required for metal tanks.

The measurement is fast and continuous, several times per second. The result is not affected by temperature fluctuations, foam, steam, pressure or movement. The sensor automatically compensates for changes caused by waves.

Installation is done on the outside of the tank. Attachment to plastic and fiberglass tanks is possible with pre-installed 3M tape.

Features

• Wireless and easy plug and play installation
• No drilling and no risk of leaks
• Accurately measures 0-100 percent on a continuous scale
• Accuracy approximately 2–3 mm
• Measurement from outside the tank from above
• Works in plastic and fiberglass tanks
• Automatic compensation for movement and conditions
• One sensor is enough per tank

Connections and compatibility

• Works on 12–24 V systems
• Outputs 0–190 ohm and 240–33 ohm
• Compatible with gauges such as KUS, VDO, Wema and Faria
• Can be connected to control and alarm systems
• Two on off outputs for alarms such as full or empty

Operation and management

The sensor is easily set up via Bluetooth on your phone or computer. The app is available for iOS, Android and Windows devices in multiple languages.

Compatibility

• Metal tanks require Gobius C adapter
• Fits standard opening 44 mm or 1 1/4 SAE 5
• Fiberglass tanks with wall thicknesses over 8 mm require an adapter

Package's content

• Sensor
• 2m cable
• 3M cleaning cloth
• Additional tape for installation

Gobius Pro meter with one sensor

For measuring liquids from outside the tank. Bluetooth and smartphone app included. New and innovative tank monitoring system. Install, adjust settings and view results from your smartphone. Free app for iPhone and Android included. You can use the Gobius Pro sensor for all liquids and tank materials. 12 - 24 V. Choose water, fuel, sewage or other liquid. Up to 9 sensors/tank.

SKYWATCH® Windoo 3 is a smartphone-compatible weather station that measures the following data:

• Wind speed
• Temperature – Wind chill
• Humidity – Dew Point
• Air pressure

It is possible to save the measured data to memory and share it via Facebook or X.

Features

Materials

• Housing: anodized aluminum
• Protective case: carbon fiber

Wind speed

• Units: km/h, mph, m/s, fps and knots
• Resolution: 0.1
• Accuracy: ±2%
• Measuring range: 3 … 150 km/h

Temperature

• Units: °C and °F
• Resolution: 0.1
• Accuracy: ± 0.3 °C
• Measuring range: -25 °C … +60 °C

Humidity

• Units: %RH (relative humidity)
• Resolution: 0.1
• Accuracy: ± 4%RH
• Measuring range: 5 … 95 %RH

Air pressure

• Units: hPa, mbar, inHg
• Resolution: 0.1
• Accuracy: ± 0.2 hPa
• Measuring range: 300 … 1100 hPa

Contents and accessories

• Windoo device
• Carbon fiber protective case
• Key ring
• Wrist strap