Mooring Buoys

Orange buoy body, single-color, 6 mm thick, semi-rigid polyethylene plastic, PE.
Filled with expanded polystyrene.

Hot-dip galvanized steel pipe sold separately (product no. 6488)

Hot-dip galvanized arm for 240L buoy. Length is 2100 mm with loop, length over buoy body 900 mm.

The buoy body is sold separately (product no. 6487).

Buoy Polyform MB40 foam filled, short arm

MB series buoys are durable and reliable, used primarily for mooring, but also for marking fishing gear, cables, pipelines and other subsurface objects.

The buoys are made of rotationally molded polyethylene (PE) and filled with expanded polystyrene (EPS), which guarantees a compressive strength of 5 mH2O and a density of 25 kg/m³.

All buoys are delivered pre-assembled at the factory.

The handle is equipped with a swivel at the bottom, and all metal parts are hot-dip galvanized for improved corrosion resistance. The top of the handle and the grip opening are coated with a durable dark blue plastic for added protection.

The size of the buoy should be chosen based on the weight and total load it will withstand. For best performance, the buoy should not be loaded to more than 60 percent of its total load capacity. It is also important to consider additional loads that may arise from, for example, marine vegetation, currents, wind and waves.

The dimensions of the arm and swivel should be selected based on the size and weight of the boat, as well as taking into account local weather conditions, currents and waves.

Use the swivel loop for underwater attachment and connection. The top grab loop is for handling only.

Check all fastening components for wear and damage at least twice a year.

MB series buoys are reliable, durable and ideal for both commercial and industrial use.

The Polyform MR40Y is a durable and maintenance-free mooring buoy made of impact-resistant, fully closed-cell Bacell foam. This special EVA foam combines lightness with excellent buoyancy – the buoy does not need air and will not burst even if damaged. All metal parts are hot-dip galvanized, which ensures good corrosion resistance. The handle and arm on the top are protected with a blue plastic coating for added durability.

Specifications:

• Model: MR40

• Buoy diameter: 380mm

• Total length of the handle: 545mm

• Shank diameter: 12mm

• Weight: 2.4kg

• Volume: 14L

• Recommended maximum load: 8.0kg

Please note:

• Secure the boat only to an underwater shackle. The top handle is for handling only.

• Check the fasteners at least twice a year.

Polyform CCE2 - Unsinkable light and reliable buoy (38cm, short ten)

The Polyform CCE2 is a durable and lightweight inflatable buoy that is ideal for mooring a boat. Made from soft, flexible PVC and equipped with a short tenon (metal rod). It is easy to inflate and comes ready to use - all you need is the right air pressure.

Features:

• Durable construction : All metal parts are hot-dip galvanized, ensuring a long service life.

• Easy to handle : Light weight and ergonomic shape make it easy to use.

• Secure attachment : A swivel shackle at the bottom makes it easy to attach the rope.

• Protected top : The handle is coated with dark blue plastic to ensure a good grip.

Specifications:

• Diameter: 385mm

• Total length: 665mm

• Weight: 4.7kg

• Valve type: V10

• Volume: 29L

• Recommended maximum load: 16.5kg

Usage tips:

• Only use the swivel shackle on the underwater part for attachment – ??the loop on the top is for handling, not attachment.

• Check the buoy and mooring equipment for wear at least twice a year.

• The buoy size should be selected based on the weight of the boat and the conditions. We recommend that the buoy is loaded to no more than 60% of its maximum load capacity.

• Avoid combining dissimilar metals: do not connect stainless steel, aluminum, copper or brass to the buoy to avoid corrosion.

A durable and easy-to-handle buoy for even demanding conditions.

The lightweight and durable Polyform CCD2 buoy is made of soft, inflatable PVC plastic. It has a long pole and is ideal for safe and easy mooring.

Features:

• Equipped with a swivel shackle at the bottom of the pin for easy attachment.

• All metal parts are hot-dip galvanized, which ensures a long service life

• The rod and handle are coated with dark blue plastic for protection and ease of handling.

• High buoyancy and easy handling – an excellent choice for those who value practicality

Specifications:

• Model: CCD2

• Diameter: 385mm

• Total arm length: 1090mm

• Shank diameter: 16mm

• Weight: 5.4kg

• Valve type: V10

• Volume: 29L

• Recommended maximum load: 16.5kg

Instructions for use and recommendations:

• Always use the shackle attachment point at the underwater end – the handle at the top is for handling only

• Check the condition of your equipment at least twice a year.

• Avoid attaching other metals (e.g. stainless steel, aluminum, brass or copper) to hot-dip galvanized parts, as hot-dip galvanizing prevents corrosion.

Tip for choosing the right size:

White buoy made of semi-rigid polyethylene plastic. Filled with polystyrene.

Buoy body dimensions:

• Ø 580mm
• Height 570mm
• Pipe Ø 60mm
• Load capacity: 105kg

NOTE! The buoy frame and buoy are sold separately.

Buoy Polyform MB40L foam filled, long arm

MB series buoys are durable and reliable, used primarily for mooring, but also for marking fishing gear, cables, pipelines and other subsurface objects.

The buoys are made of rotationally molded polyethylene (PE) and filled with expanded polystyrene (EPS), which guarantees a compressive strength of 5 mH2O and a density of 25 kg/m³.

All buoys are delivered pre-assembled at the factory.

The handle is equipped with a swivel at the bottom, and all metal parts are hot-dip galvanized for improved corrosion resistance. The top of the handle and the grip opening are coated with a durable dark blue plastic for added protection.

The size of the buoy should be chosen based on the weight and total load it will withstand. For best performance, the buoy should not be loaded to more than 60 percent of its total load capacity. It is also important to consider additional loads that may arise from, for example, marine vegetation, currents, wind and waves.

The dimensions of the arm and swivel should be selected based on the size and weight of the boat, as well as taking into account local weather conditions, currents and waves.

Use the swivel loop for underwater attachment and connection. The top grab loop is for handling only.

Check all fastening components for wear and damage at least twice a year.

MB series buoys are reliable, durable and ideal for both commercial and industrial use.

Orange net float made of PVC plastic.

• Diameter: 210mm
• Color: Orange

Convenient buoy mooring for boats weighing up to approximately 4 tons

Pre-assembled Mooring-Master buoy rope. A buoy anchoring package with abrasion-resistant four-ply polyethylene rope, with lead embedded in each strand. The purpose of the Mooring Master buoy rope is to protect the bottom vegetation and the rope by keeping the rope off the bottom between the buoy and the bottom anchor. The Mooring Master buoy rope is supplied as a kit containing all the necessary components.

The lower part of the rope is pre-assembled at the factory and equipped with a pipe collar and a shackle for attachment to a bottom anchor. The height of the float above the bottom depends on the depth of the water — usually 1.5–3 meters is a good rule of thumb. A cable lock should be installed above the float as a stop.

The package includes:

• Pipe shackle 20 mm, pre-assembled upon delivery
• Shackle 20 mm, pre-assembled upon delivery
• Float, pre-installed upon delivery
• Cable lock 14 mm, pre-installed upon delivery
• Buoy rope with integrated lead, 4-strand, 20 mm
• Shackle 20 mm, for final installation on the buoy
• Shackle 20 mm, for final installation
• Cable lock 14 mm, 2 pcs, for final installation
• Installation instructions

Robline Mooring-Master buoy rope set

Convenient buoy mooring for boats up to approx. 4 tonnes. Pre-assembled Mooring-Master buoy/mooring rope. Buoy mooring package with hard-wearing four-ply polyethylene rope; each strand has a lead core. The purpose of the Mooring Master buoy rope is to protect the bottom vegetation and the rope by keeping the rope off the bottom between the buoy and the bottom anchor.

The Mooring Master buoy rope is supplied as a set with all the necessary components. The lower part of the rope is pre-assembled at the factory, and has a pipe collar and shackle for attaching to a bottom anchor. The height of the float should be measured from the bottom according to the water depth — usually 1.5–3 meters is a good rule of thumb.

A cable lock must be installed above the float as a stopper.

Intelligent buoy mooring for boats weighing up to approximately 4 tons

Pre-assembled Mooring-Master buoy rope. A buoy anchoring package with a rope made of abrasion-resistant four-layer polyethylene, with lead embedded in each strand. The purpose of the Mooring Master buoy rope is to protect the bottom vegetation and the rope by keeping the rope afloat between the buoy and the bottom anchor.

The Mooring Master buoy rope is supplied as a kit containing all the necessary components. The lower part of the rope is pre-assembled at the factory and has a pipe collar and a shackle for attachment to a bottom anchor.

The height of the float above the bottom depends on the depth of the water — usually 1.5–3 meters is a good rule of thumb. A cable lock should be installed above the float as a stop.

The package includes:

• Pipe shackle 20 mm, pre-assembled
• Shackle 20 mm, pre-assembled
• Float, pre-installed
• Cable lock 14 mm, pre-installed
• Buoy rope with integrated lead, 4-strand, 20 mm
• Shackle 20 mm, for final installation on the buoy
• Shackle 20 mm, for final installation
• Cable lock 14 mm, 2 pcs, for final installation
• Installation instructions

Dimensions:

• Buoy body Ø 480mm
• Height 280mm
• Weight frame 6kg
• Pipe Ø 45mm
• Load capacity 30kg.
• Note: Buoy frame and buoy are sold separately.

Dimensions:

• Buoy body Ø 580mm
• Height 330mm
• Pipe Ø 60mm
• Load capacity 52kg
• Note: Buoy frame and buoy are sold separately.

Sleeve Ø 60mm for buoy arm when using buoy rope as an anchor point. The sleeve protects the rope from wear.