OCTOBER SALE

Use 3M™ Perfect-It™ Finisher to achieve a high gloss finish and long-lasting protection on repaints or original paintwork that has been treated with the Perfect-it Paint Finishing System. Apply the finisher by hand with a soft cloth or, for more efficient results, with a dual-action sander. 3M™ Perfect-It™ Finisher provides a high gloss finish on repaints or original paintwork. It contains carnauba wax to provide long-lasting protection for the Perfect-it Paint Finishing System. The finisher contains silicone, which is approved for use in bodyshops. It makes working easy without compromising the environment.

Sanding steps (3M Color Codes):

· White Cap (Coarse Sanding) – Used to remove deep scratches and sanding marks.

· Green cap (Medium grit) – Removes smaller to medium sized imperfections and creates a smooth, even surface.

· Yellow Cap (Fine Sanding) – Removes fine scratches and achieves a shiny, nearly flawless surface.

· Blue Cap (High Gloss/Gloss Enhancement) – Provides a mirror-like finish with maximum shine.

· Red Cap (Wax/Shine Guard) – A finishing coat that provides long-lasting protection and a deep shine.

Very convenient and energy-efficient LED floodlight 50W. Contains 10 LEDs. Light range 1083 meters. IP56 waterproof. Fixed installation. Rotates 360° horizontally and 90° vertically. Black UV-resistant plastic. Very easy to install thanks to the wireless control panel (remote control range 75 meters).

• Size: W. 214 mm, H. 201 mm, D. 241 mm.
• Power: 30W, current consumption: max 4A.

Zinc anode ring for Gori propeller 13–18

Zinc anode ring for Gori propellers with shaft sizes 13–18. The anode protects the propeller and shaft from corrosion by acting as a sacrificial metal. Corresponds to the original Gori product and is dimensioned directly to the original.

Features

• Zinc sacrificial metal anode

• Designed for Gori propellers

• Effective protection for propeller and shaft

• Corresponds to the original model

Dimensions

• I: 98 mm

• a: 40 mm

• Width: 79mm

• Hole Ø: 11 mm

• Ø1: 6.5 mm

Product information

• Compatibility: Gori propellers, shaft size 13–18

• Corresponds to the original product number: 15670000

It is recommended to replace the anode in a timely manner to ensure that the propeller and other metal parts remain effectively protected from corrosion.

Arida Færder is an efficient and compact dehumidifier for boats where space is limited but humidity control is important. Arida Færder is a permanently installed sorption dehumidifier that removes moisture from the boat's interior air and prevents mold, corrosion and musty odors. The device has WiFi control and an external, wired hygrostat. The dehumidifier also works excellently in cold conditions and blows moisture out of the boat as moist air - it does not collect water in the tank.

Færder is the same device as the Arida Pro S13 Wifi, designed for households, and the only difference is that Færder removes a maximum of 8 liters per day while the S13 Pro removes a maximum of 13 liters per day.

The perfect dehumidifier for your boat

Does the air inside your boat feel damp and musty? Are there visible signs of corrosion on the wires or are the textiles damp? Arida Færder lowers the relative humidity of the air and prevents the formation of mold, fungus and odors. The end result is a fresher and more pleasant indoor air without unpleasant odors and moisture-induced damage.

In addition, the device has a HEPA filter that cleans the air of dust and impurities.

Easy installation

The dehumidifier is installed in a suitable location on the boat and secured securely. It can be placed, for example, inside a cabinet, under a bench or in a technical space.

• The dryer sucks moist air from the boat through a 90 mm hose.
• The dried air is returned to the boat through another 90 mm hose.
• Moisture is removed from the boat as humid exhaust air through a 40 mm hose and a hull penetration.

Works even in cold conditions

Arida Færder uses rotor-driven sorption technology, which ensures excellent drying performance at all temperatures, even in freezing conditions. Whether it is a warm summer day or cold winter storage, Arida Færder dries efficiently. This is especially important on boats where the temperature fluctuates a lot. The device is also excellently suited for freezing conditions.

HEPA filter – cleaner air and longer service life

The Arida Færder dehumidifier has a HEPA filter that protects the device from dust, exhaust particles, salt crystals and other impurities. Over time, these can reduce the device's performance and, in the worst case, cause dangerous situations. Therefore, it is a good idea to change the filter once a season to maintain the device's efficiency and safety.

Compact dehumidifier with sorption. A truly efficient dehumidifier that allows you to collect moisture from the air even at low temperatures. Unlike cheaper condensation dehumidifiers, this sorption dehumidifier can collect moisture when the temperature drops even to zero degrees. The special structure and materials of the sorption dehumidifier enable the space to remain dry even in Finland's challenging spring and autumn weather, when temperatures fluctuate on both sides of zero degrees. In these weather conditions, humidity in the spaces is the most challenging and it can cause odors, mold, rust and corrosion. Dry indoor air is also significantly more comfortable when, for example, all interior surfaces are not damp and slippery when you arrive on a boat.

A dehumidifier for those who need to dry a small space in all temperatures above zero. This dehumidifier is well suited for:

- For a motorhome
- For a caravan
- To the boat
- To a small basement
- To the summer cottage

The dehumidification capacity is around 3 litres per day. This is around half that of most other sorption dehumidifiers, making it suitable for solving moderate humidity problems. The advantage of this compact size is that it takes up little space and consumes little power.

The dehumidifier can be used at low or high power. In this case, it only uses 200 watts or 320 watts. This is important in campsites, ports and other places where electricity is limited. The device's efficient sorption feature makes the device cost-effective, as it does not have to run as long as compressor models to remove the same amount of moisture from the air. Shorter operating time -> lower overall consumption. The device requires shore power, i.e. 230V, to operate.

The size is only 414mm high, 219mm wide and 170mm deep. The water tank has a capacity of 1.8 liters. It is possible to connect a drain hose to the tank and empty it directly into, for example, a sink.

Can be mounted on the wall, used as a stand or hung on the wall. Wall brackets are included in the package, so you don't need to buy them separately.

A drain hose is included if you want to drain the water directly into the drain. This is attached directly to the water tank.

The device does not have a compressor, so it is very quiet. The only sound you hear is the hissing sound from the fan due to ventilation. The device does not vibrate. The sound level is measured at 33 decibels on low power and 47 decibels on high power.

The device has a built-in safety feature that allows for customized steering, tilt, and internal temperature monitoring to prevent overheating.

Automatic start after power failure.

Energy saving functions, the device also has a timer, allowing you to schedule use for 1-7 hours.

Engine compartment fan Turbo 3000.

• Integrated safety harness + dyneema-reinforced safety harness attachment
• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Enlarged neckline + padded collar
• Outer shell: Cordura
• Heavy-duty quick-release buckle closure + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap as standard (removable)
• Warranty: 5 years

• Baltic 2433 life jacket replacement cartridge 33gr
• Baltic 2407 UML Pro Sensor life jacket trigger

• Thanks to its unique design, the Baltic Legend is one of the most comfortable lifejackets with safety harness on the market for both women and men. Thanks to the unique zipper cut, the vest has an exceptionally large neck opening, which allows you to put on and adjust the vest so that it does not press on the neck at all when in use. The vest is also very comfortable to wear even with a sailing jacket with a massive collar. The Legend lifejacket materials also use a very flexible fabric, which means that it always shapes to the user and the back is padded for comfort. The Legend 165 is equipped with an automatic UML Pro Sensor trigger mechanism that automatically triggers and inflates the vest in 3 seconds when it comes into contact with water (NOT triggered by rainwater). The outer fabric also has an inspection window where you can check the condition of the vest at a glance. This model also has an integrated safety harness with a dyneema-reinforced textile loop for a safety rope. Dyneema reinforced safety harness loops have become more common because they weigh significantly less than traditional metal ones, and this has reduced the overall weight of the vest. In addition, this SLA model has a pre-integrated sprayhood, a lifejacket light and ready-made attachment straps for an AIS or PLB emergency transmitter on the inside of the outer shell. So the SLA model meets the World Sailing Offshore Special Regulations requirements. Baltic inflatable lifejackets are granted a 5-year warranty and each lifejacket is tested individually before leaving the factory. Baltic Inflatable lifejackets have had a gas cartridge holder installed in them since 2013, which ensures that the bottle does not loosen even if it is exposed to strong vibrations or very large temperature fluctuations.
  
  FEATURES:
  Integrated safety harness + dyneema-reinforced safety harness attachment
• SLA model: integrated sprayhood and life jacket light. Also has a loop for AIS or PLB personal distress transmitter. Meets World Sailing OSR requirements.
• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Enlarged neckline + padded collar
• Outer shell: Cordura
• Heavy-duty quick-release buckle closure + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap as standard (removable)
• Warranty: 5 years

• 
  Reloading a life jacket, parts needed:
  Baltic 2433 life jacket replacement cartridge 33gr
• Baltic 2407 UML Pro Sensor life jacket trigger

Legend 305 is a high-buoyancy lifejacket with a design that ensures excellent fit and freedom of movement in the neck area. Thanks to its unique design, Baltic Legend is one of the most comfortable lifejackets with safety harness on the market for both women and men. Thanks to the unique zipper cut, the vest has an exceptionally large neck opening, which allows you to put on and adjust the vest so that it does not press on the neck at all when in use. The vest is also very comfortable to wear even with a sailing jacket with a massive collar. The Legend lifejacket materials also use a very flexible fabric, which means that it always shapes to the user and the back is padded for comfort. Legend 165 is equipped with an automatic UML Pro Sensor trigger mechanism that automatically triggers and inflates the vest in 3 seconds when it comes into contact with water (NOT triggered by rainwater). The outer fabric also has an inspection window where you can check the condition of the vest in an instant. This model also has an integrated safety harness with a Dyneema-reinforced textile loop for a safety rope. Dyneema-reinforced safety harness loops have become more common because they weigh significantly less than traditional metal ones, thus reducing the overall weight of the vest. Baltic inflatable lifejackets are guaranteed for 5 years and each lifejacket is tested individually before leaving the factory. Baltic Inflatable lifejackets have had a gas cartridge holder installed in them since 2013, which ensures that the cylinder does not loosen even if it is exposed to strong vibrations or very large temperature fluctuations.

• Integrated safety harness + dyneema-reinforced safety harness attachment
• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Enlarged neckline + padded collar
• Outer shell: Cordura
• Heavy-duty quick-release buckle closure + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap as standard (removable)
• Warranty: 5 years

Recharging a life jacket, parts needed: (see compatible products)

• Baltic life jacket replacement cartridge 60gr
• Baltic UM Elite life jacket trigger

A comprehensive Man-Over-Board rescue system. Swedebuoy includes a lifebuoy and 30 meters of buoyant rope. The lifebuoy has 8 reflectors, two sturdy lifting handles and a grab handle. The shell is easy to open and conveniently pack back, keeping all the equipment safe and within easy reach. Swedebuoy is the perfect solution for a well-equipped boat.

• Integrated safety harness + dyneema loop for safety rope
• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Fleece collar
• Outer shell: cordura
• Steel buckle fastening + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap as standard (removable)
• Warranty: 5 years

• Baltic life jacket replacement cartridge 33gr
• Baltic 2520 UM lifejacket trigger

• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Fleece collar
• Outer shell: cordura
• Strong construction quick-release buckle + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap (removable)
• Warranty: 5 years

• Baltic life jacket replacement cartridge 33gr
• Baltic UM life jacket launcher

• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Fleece collar
• Outer shell: cordura
• Strong construction quick-release buckle + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap (removable)
• Warranty: 5 years

• Baltic life jacket replacement cartridge 33gr
• Baltic UM life jacket launcher

Features

• Automatic trigger when in contact with water (does not trigger from rainwater). The vest inflates in three seconds.
• Manual release cord if you want to inflate the vest before entering the water
• The vest is reloaded by replacing the trigger parts and closing the zipper.
• Fleece collar
• Outer shell: cordura
• Strong construction quick-release buckle + adjustable waist adjustment
• Six reflectors
• Whistle integrated and turns in front of the face when the vest is inflated
• Lifting handle, can withstand helicopter lifting
• Crotch strap (removable)
• Warranty: 5 years

Reloading a life jacket. Parts needed:

• Baltic life jacket replacement cartridge 33gr
• Baltic UM life jacket launcher

• Manual trigger mechanism, triggered by pulling the trigger cord
• Charges within 3 seconds of launch
• The vest is closed with a zipper, which significantly extends the life of the vest
• When the vest is triggered, the zipper tears open. The vest can be reloaded/packed by changing the CO2 cartridge and closing the zipper again.
• 6 x reflectors (visible when the vest is inflated)
• Fleece collar
• Crotch strap as standard (removable)
• Lifting handle

• Baltic life jacket replacement cartridge 33gr

BEP EZ-Mount main power switch, from the Pro Installer series. EZ-mount allows for extremely easy installation. 1: Install the base. 2: Connect the cables. 3: Snap the cover into place.

Function: on/off.
IP66 rated.
Removable shells and knob.
Surface mounting
12V - 48V.
Pre-processed connections 2 x M10.
Maximum load at start-up: 1500A for 10 seconds.
Maximum load for 5 minutes: 600A.
Continuous load: 400A.
Dimensions: L 98 x W 98 x H 92mm.

BEP Pro Installer is a completely new concept for boat electrical installations. Pro Installer connectors allow Pro Installer components to be connected without cables, making installations more durable, cleaner and more compact.

Conductive parts made of tinned copper. Compact design that saves space. Polycarbonate lock. Long connection screws. Stainless screws, washers and bolts. Withstands up to 50V. BEP Pro Installer is a completely new concept for electrical installations on boats. With the help of connection pieces, Pro Installer components can be connected without cables, making installations more durable, neater and more compact.

Blue Sea's ready-made charging kit with automatic charging relay and main circuit breaker. Ready-made kit for a max. 120A charger when you want to add a second battery to your boat. The kit includes the 7610 SI-ACR charging relay for a 120A charger and the main circuit breaker 5511e suitable for the kit.