Trim control panels
Control panels and controls for trim tabs.Trim control panels group products
Lenco switch panel.. Equipped with a 20A fuse. Waterproof.
- Height: 70mm
- Width: 70mm
The package includes
- #122 Carling double rocker switch. Also included are Plug & Play Deutsch connectors for easy and quick installation.
- The kit includes a 36-inch (91.4 cm) power cord for a single system and a 72-inch (182.9 cm) power cord for a dual system. All necessary mounting hardware is included.
- The required mounting hole size for installation is 2.25 inches, and the overall dimensions of the keyboard are 2.75" × 2.75".
The Standard All-In-One integrated switch panel on Lenco trim tabs improves control accuracy and integrates the functions of the control unit directly into the switch panel. There is no need for a separate control box, as the control functions are integrated into the switch.
Features
- Plug & Play installation makes installation quick and easy.
- The switch responds immediately to user commands.
- The built-in reset function ensures reliable operation.
- The low profile provides a clean and discreet installation.
- Watertight Plug & Play Deutsch connectors.
- The length of the wiring harness is 76.2 cm measured from the back of the switch.
- The length of the power cord is 91.4 cm.
- Installation requires a 2-1/16" mounting hole, and the overall dimensions of the panel are 2.75" × 2.75".
- A 4.08" clearance is required behind the switch mounting location.
- Switch/control panel
- Lenco for trim tabs
- 12 or 24V
Complete your Lenco trim level system with the latest maintenance-free (ALL-IN-ONE) control panel with integrated tactile switches. The new type of switch improves accuracy and allows the control electronics to be integrated into the key frame.
The LED indicator lights up and accurately indicates the position of the trim tabs. The backlit keyboard turns on automatically at dusk. A light sensor measures the ambient light and adjusts the indicator's light intensity accordingly.
- Simple and quick Plug & Play installation
- Immediate response
- Built-in indicator
- Low-profile design
- All-in-one keyboard with waterproof Plug & Play Deutsch connectors
- Cable bundle length 30" (76.2 cm) from behind switch panel
- 36" power supply cable
- 2 1/16" mounting hole, keyboard outer dimensions 2.5" x 2.75"
- 4.08" of free space behind the keyboard to allow for installation as needed
- 2 powerful LED indicators show the trim level position in real time
- Photo Eye light sensor adjusts light to suit all conditions
- Backlit keyboard allows for optimal viewing angle even at night
- Self-check function
- Built-in Control Box
- Automatic return of the trim tab to the up position in the event of a power failure
- Power cord 90 cm
- Lenco additional switch kit
- LED level indicators
- 9m cable
When the speed changes, the course changes or the passengers move, the ACS trim control automatically corrects the boat's attitude by adjusting the position of the trim tabs. The system is easy to install for both hydraulic and electromechanical trims. All the functions related to the control of the device are included in the ACS R and ACS RP control panel and no separate devices need to be installed. It is enough to replace the existing switches with this new control panel.
All panels feature a trim tab position indicator, manual trim tab adjustment, and automatic tab return when speed drops below the glide threshold. Works great with all common trim systems.
- Adjusts the boat's lateral position
- Compatible with the following hydraulic trim tabs: Bennett,
Instatrim, Trimmaster, QL Volvo Penta, TFX Teleflex, TX Controls - Compatible with the following electromechanical trim tabs: Lectrotab, Lenco, Eltrim, Ultraflex
- Suitable for boats 15 - 40 feet long
- Panel size 8 x 7.5 x 1 cm
- Waterproof IP68
- Power supply 0.02 A (when trim levels are not activated)
- Operating temperature -10 to +85 degrees
Mente Marin Automatic Trim Plane Panel ACS RP
Faster planning
Smart memory function
General compatibility
Stable and safe driving
About the Mente Marin Automatic Trim Panel ACS RP system
Principle
- Adjusts the trim tabs in the lateral and longitudinal directions
- Compatible with the following hydraulic trim tabs: Bennett,
- Instatrim, Trimmaster, QL Volvo Penta, TFX Teleflex, TX Controls
- Compatible with the following electromechanical trim tabs: Lectrotab, Lenco, Eltrim, Ultraflex
- Suitable for boats from 15 to 40 feet in length
- Panel size 8 x 7.7 x 10 cm
- Waterproof IP68
- Maximum load 18 A (when activating trim levels)
- Power supply 0.02 A (when trim levels are not activated)
- Operating temperature -10 to +85 degrees
The ACS A automatic trim system adjusts the boat's running position in both the lateral and longitudinal directions. The system is ideal for boats with two steering points or where the installation location is not suitable for installation according to the instructions (e.g. a rotating steering console). Automatic bow angle correction speeds up planing and improves fuel economy, and lateral correction increases comfort.
When the speed changes, the course changes or the passengers move, the ACS trim control automatically corrects the boat's attitude by adjusting the position of the trim tabs. The system is easy to install for both hydraulic and electromechanical trims. All the functions related to the control of the device are included in the ACS R and ACS RP control panel and no separate devices need to be installed. It is enough to replace the existing switches with this new control panel.
All panels feature a trim tab position indicator, manual trim tab adjustment, and automatic tab return when speed drops below the glide threshold. Works great with all common trim systems.
A second control panel can be installed as an accessory for the ACS A trim system, for example in the upper cockpit.
- Lateral and longitudinal steering
- Manual control and trim level position indicator
- Automatic adjustment of the driving position according to the prevailing conditions
- Suitable for all common trim systems
- Easy to install in place of an existing switch panel
The Zipwake Mini Controller combines the ease of use of a sleek control panel with the ability to adjust your boat’s trim without a touchscreen. This small and discreet controller complements a Zipwake system equipped with an Integrator module and touchscreen multifunction displays (MFDs). It acts as a “hands free” remote control for the Zipwake app, allowing you to optimize your boat’s trim without using a touchscreen.
User-friendly and intuitive control dials allow for automatic operation or manual adjustments. The Mini Controller has built-in GPS, so an external GPS source is not required to operate the system. It is fully waterproof and can be surface or flush mounted anywhere on your boat. In addition, the Mini Controller’s “Key Sense” can be connected to the engine ignition for automatic power on.
Key details of the Mini Controller:
- User-friendly and intuitive adjustment rollers
- Waterproof construction
- Built-in GPS
- Automatic power on/off
- Surface or recessed installation
- Up to 3 Mini Controllers in the system
- Indicator lights: RGB LEDs
- Voltage: 12 – 32 V DC
- Power consumption: Max. 2 W
- Operating temperature: -20°C – +80°C
- Storage temperature: -40°C – +90°C
- Waterproof rating: IP67
- Compass safety distance: 0.5 m
- Approvals: CE, FCC
• Dynamic pitch and roll control
• Steering enhancement
• Built-in GPS and motion sensors
• Unique and intuitive 3D controls
• Sunlight readable color display
• Instant state user feedback
• Auto power on/off via ignition key sense
• Full range of electrical interfaces
• NMEA 2000
• Waterproof
• Auto dimming / night mode
• Upgradable via USB stick
• Up to four control panels in the system
• Surface or flush mount
• Manages installation configurations from 1 up to 6 interceptors
Model: CP-S
Display: 2.4’’ Transflective color TFT, 320 x 240 pixels, double-sided, anti-reflection coated window
Internal sensors: 5 Hz GPS, 3D Gyro, 3D Accelerometer, Ambient light
Supply Voltage: 12 - 32 V DC
Power Consumption: 10 W max
Operating Temperature: -20° to +85°C (-4° to +185°F)
Storage Temperature: -40° to +90°C (-40° to +194°F)
Waterproof Rating: IP67 / IP64 (front / back)
Compass Safe distance: 0.5 m (1.7 ft)
Compliance: CE, FCC
Weight: 0.22 kg (0.49 lbs)
Mounting: Flush or surface
The panel’s two unique control wheels provide easy, quick and intuitive manual control of running trim, heel or heading. However, the system normally operates in automatic control mode, which is enabled by a single press on the AUTO button. In this mode, the built-in high-frequency GPS, 3D gyro sensors and robust motion controller automatically ensure dynamic elimination of un- comfortable and dangerous boat pitch and roll.
The system provides continuous feedback of boat speed, pitch and roll angle, as well as the interceptors ? positions, on a 2.4” sunlight-readable color display.
