Other propellers
Other propellers -ryhmän tuotteet
- Three-bladed
- For Evinrude outboards
- Diameter 10-1/2 Pitch 12
Honda propeller nut kit 20115250 115-250hp
Michigan XHS II Bottom Bracket 221
- Suzuki outboard motors
- (3" Gearcase - 25-30hp)
- Evinrude/Johnson outboard motors
- (3" Gearcase - 25hp 4-stroke & 30hp 4-stroke; 2004-2007)
Michigan XHS II Bottom Bracket 222
- Nissan/Tohatsu outboard motors
- (3 Gearcase - 25-30hp)
- Mercury/Mariner/Sea Ray outboard motors
- (3 Gearcase - 25 & 30hp 4-stroke - Not Bigfoot models)
Michigan XHS Bottom Bracket 123
- Yamaha outboard motors
- 20 HP 1996-97
- 25 HP 1980-
- F25 4-Stroke 1998-06
- F25 4-Stroke 2010-
- 30 HP 1983-02
Michigan XHS Center 119
- Honda (3" Gearcase - 25 & 30 hp 4-stroke models)
- Note! Requires a hub to function (select from drop-down menu)
Compatible engines Honda 25-30 HP, Johnson/Evinrude 15-35 HP, Mercury/Mariner 9.9-30 HP, Suzuki 20-30 HP, Tohatsu/Nissan 25-30 HP, Yamaha 20-30 HP
Honda 25–30 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline axle – 3-speed gear case – Thru Hub Exhaust
- Hub putty: 108-4-119 / 108-4-219
- BF 25 1994–
- BF 30 1995–
Johnson/Evinrude 15–35 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-121 / 108-4-221
- 25 hp 4-stroke 2004–07
- 30 hp 4-stroke 2004–07
- 14-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-118 / 108-4-218
- 15 hp E-TEC HO 2011–
- 20 hp 2-cyl. 1984–97
- 25 hp (Commercial) 1993–05
- 25 hp 2- and 3-cyl. 1984–
- 25 hp E-TEC 2009–
- 30 hp 2-cyl. 1984–
- 30 hp E-TEC 2009–
- 35 hp 2-cyl. 1979–83
- 35 hp 3-cyl. 1997–01
Mercury / Mariner 9.9–30 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-120 / 108-4-220
- 9.9 hp 4-stroke Bigfoot/Sail 1999–05
- 15 hp 4-stroke Bigfoot/Sail 1999–05
- 18 hp (Mercury) 1980–85
- 20 hp 2-stroke (Mercury) 1986–02
- 25 hp 2-stroke (Mercury) 1980–05
- 25 hp 2-stroke (Mariner) 1985–
- 25 hp (Sea Pro/Marathon) all years
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-122 / 108-4-222
- 25 hp 4-stroke (not Bigfoot) 2006–
- 30 hp 4-stroke (not Bigfoot) 2006–
Suzuki 20–30 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-121 / 108-4-221
- DT 20 1985–86 (*use stopper 57632-96400)
- DT 20 1987–88
- DT 25 1985–86 (*use stopper 57632-96400)
- DT 25 1987–88
- DT 25C 1989–00
- DF 25 4-stroke (incl. V-Twin) 2000–
- DF 25R 2010–
- DF 25A 2014–
- DT 30 1983–86 (*use stopper 57632-96400)
- DT 30 1987–97
- DT 30C 1987–97
- DF 30 4-stroke 2000–07
- DF 30A 2014–
Tohatsu / Nissan 25–30 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-122 / 108-4-222
- 25 hp 1986–01
- 25 hp 4-stroke 2002–
- 30 hp 1985–01
- 30 hp TLDI 2016–
- 30 hp 4-stroke 2002–
Yamaha 20–30 hp
- GEAR CASE FITTING RING must be used (supplied with propeller)
- 10-spline shaft – 3-speed gearbox – flow-through exhaust
- Hub putty: 108-4-123 / 108-4-223
- 20 hp 1996–97
- 25 hp 1980–
- F25 4-stroke 1998–06
- F25 4-stroke 2010–
- 30 hp 1983–02
- Note! The propeller requires a hub to function (select accessories from the section)
Propulse composite propeller, adjustable and replaceable blades. Suitable for: Mercury-Mariner 25-60 hp, Nissan-Tohatsu 35-50 hp, Honda 35-50 hp, Suzuki 40-65 hp, Yamaha 30-60 hp outboard motors. The pitch angle of the propellers can be selected between 11-17. You can adjust the pitch yourself and give your boat the best performance in each application area (e.g. water skiing, light or heavy cargo). A properly adjusted propeller saves fuel, increases the boat's speed and improves driving characteristics.
Hub kit for Nemesis propeller.
- 35-65 HP
- 13 hampainen boori
- DT35C HP, 1987-90
- DT40, DF40 HP 1983 & Newer
- DF 50, 1999 & Newer
- DT50, 50M HP 1983-84
- DT55 HP 1985-97
- DT60 HP 1983-84
- DT65 HP 1985-97
Spare blade set (4 pcs) for S4 Universal and 6902 propellers. In the event of damage, you can simply replace the propeller blades on the spot and continue your journey without delay and at a lower cost than if you had to have the propeller repaired.
- Fits S4 Universal and 6902 propellers
- 3-1/4" gear housing
- 35–65 hp
Engine: Evinrude 40-140HV
Blades: 3
Size (diameter/pitch): 13-1/4 x 17
Original part number: 176214
The Quicksilver Nemesis is a four-blade aluminum propeller. The propeller blades are designed to maximize speed, acceleration and the best possible grip. The high-gloss Phantom Black finish makes the propeller easy to maintain.
It fits most 75-150hp outboard motors, such as:
Honda 135-225hp
Mercury/Mariner 135-350hp
Yamaha 150-300hp
Alpha One and Bravo One Mercruiser
OMC Cobra (4-3/4' transmission)
Volvo Penta SX
Yamaha V6/V8 (4-3/4' transmission)
Complete your propeller with a compatible Quicksilver hub .
- Four-legged
- 100-300hp
- Multiple models
The Quicksilver Nemesis is a four-blade aluminum propeller. The propeller blades are designed to maximize speed, acceleration and the best possible grip. The high-gloss Phantom Black finish makes the propeller easy to maintain.
It fits most 75-150hp outboard motors, such as:
- Honda 75-130hp
- Mercury/Mariner 40-60hp Bigfoot, 70-140hp Standard transmission
- Yamaha 50-130hp
- Suzuki 70-140hp (4-stroke)
- Nissan/Tohatsu 70-140hp
Complete your engine with a compatibleQuicksilver bottom bracket .
- Four-legged
- 75-150hp
- Multiple models
- 3" gear housing
- 25–30 hp
- 3" gear housing
- 25 hp 4-stroke (2004–2007)
- 30 hp 4-stroke (2004–2007)
- 3" Gearbox
- 25-30hp
Compatible with the following engines:
- Honda 115-250 HP
- Johnson/Evinrude 90-300 HP
- Mercury/Mariner 90-300 HP
- Suzuki 150-300 HP
- Tohatsu/Nissan 115-250 HP
- Yamaha 150-300 HP
- Volvo Penta SX 3.0-8.2 L
- High-performance blade geometry
- Precisely balanced
- High-gloss powder coating
- Centers are sold separately!
- Material: plastic
- Propeller hub diameter: 3.5"
- Usage: efficiency
- Recommended only for R3 30 models
It fits most 75-150hp outboard motors, such as
- Force 75-150hp
- Honda 75-130hp
- For Mercury/Mariner 40-60hp Bigfoot and 70-140hp Standard transmissions
- Suzuki 70-140hp (4-stroke),
- Nissan/Tohatsu 70-140hp
- Yamaha 50-130hp
Complete your engine with a compatible Quicksilver hub:
- Quicksilver Evinrude/Cobra 2 propeller hub - 95031
- Quicksilver Evinrude/Cobra 3 propeller hub - 95032
- Quicksilver Evinrude/Cobra/SX 4 propeller hub - 95033
- Quicksilver Evninrude 1 propeller hub - 95030
- Quicksilver Honda 1 propeller hub - 95016
- Quicksilver Honda 2 propeller hub - 95017
- Quicksilver Honda 3 propeller hub - 95018
- Quicksilver Mercury 2 propeller hub - 95002
- Quicksilver Mercury 3 propeller hub - 95003
- Quicksilver Mercury 4 propeller hub - 95004
- Quicksilver Mercury 5 propeller hub - 95005
- Quicksilver Mercury 6 propeller hub - 95006
- Quicksilver Suzuki 1 propeller hub - 95020
- Quicksilver Suzuki 2 propeller hub - 95021
- Quicksilver Suzuki 3 propeller hub - 95022
- Quicksilver Suzuki/Johnson 4 propeller hub - 95023
- Quicksilver Suzuki/Johnson 5 propeller hub - 95024
- Quicksilver Tohatsu 1 propeller hub - 95028
- Quicksilver Yamaha 2 propeller hub - 95012
- Quicksilver Yamaha 3 propeller hub - 95013
- Three-bladed
- 75-150 hp
- Multiple models
