Outboard motor and spare parts deals!
Outboard motor and spare parts deals! -ryhmän tuotteet
Nuova Rade DIABLO tank
This tank is intended for use as a water, fuel or septic tank. To be topped off with a suitable lid. Made from recyclable, non-toxic, food-grade high-density polyethylene.
There are eight options available, ranging from 37 to 108 liters of tanks.
Choose the right cover and connectors for you (fuel, water or septic tank)
- Water, fuel or holding tank
- Volume: 49 liters
- Length: 500mm
- Width: 360mm
- Height: 305mm
Glydus hydraulic steering system for 175 hp outboard motors
Glydus 175 hp is a modern hydraulic steering system for outboard motors up to 175 horsepower. The system is based on the previous Multisteer OH 175 model and offers a stable, efficient and precise steering feel for both day trips and longer journeys.
The new HR22 pump operates at higher pressure and responds faster, improving steering accuracy. The non-feedback function keeps steering stable without disturbing movements from the motor. The structure is designed for easy installation, low friction and long-lasting use.
Perfectly suited for medium-sized boats and provides reliable steering even at higher speeds.
Features
- Complete set includes steering pump, cylinder, hoses and oil
- Non-feedback system keeps direction stable without motor influence
- Refurbished HR22 pump, operating pressure 1015 psi
- Recommended engine power 115–150 hp
- Maximum engine power 175 hp
- Suitable for engine wells from 570 mm wide
- Recommended steering wheel diameter 350 mm for optimal control
- Recommended engine power: 115–150 hp
- Maximum engine power: 175 hp
- Steering wheel revolutions from side to side: 5.6
- Pump: HR22, volume 18 cm³, max. pressure 1015 psi
- Cylinder: OC-175, displacement 123 cm³, stroke 204 mm
- Threads: 9/16" UNEF (pump and cylinder)
- Minimum width for engine well: 570 mm
Skypoint GPS electric bow thruster
The Hydra Skypoint 12V 65lb 54” is a GPS bow thruster with sky anchor function that gives you more time to focus on fishing. The easy-to-use and versatile Hydra Skypoint bow thruster allows you to navigate fishing grounds easily, environmentally friendly and almost silently.
Hydra Skypoint electric bow thrusters are equipped with a highly accurate GPS antenna, which ensures precise anchoring and precise route guidance. In addition to the sky anchor function, which is especially popular with casters, the device's versatile GPS functions can be utilized for route guidance and route recording, and can be used, like an autopilot, as an aid for trolling, for example.
The Hydra Skypoint 12V 65lb 54” is a 12 volt electric bow thruster equipped with a highly efficient 65 lb electric motor, a durable 54” composite propeller and a 3-blade propeller. The efficient and high-quality 65lb electric motor produces up to 20% more thrust compared to the most common 12 volt bow thrusters on the market. The 12 volt Hydra Skypoint bow thrusters are suitable for installation on most fishing boats of approximately 5 meters. A guide size range for a suitable boat size for the 12V 65lb 54” Hydra Skypoint bow thruster is approximately 4.0–5.5m in length and with a total weight of less than 700kg. The selection of the optimal size bow thruster is also influenced by the boat’s other characteristics and the operating environment (e.g. large surface area and windy/current conditions).
The Hydra Skypoint electric bow motor is very easy to use with the included wireless remote control. The remote control with a display makes it easy to control the motor and manage functions, even if visibility in the direction of the bow motor is poor. The remote control display allows you to monitor, for example, the current function, boat speed, bow motor battery voltage and the charge level of the remote control batteries. The remote control can also be used to program up to 16 routes (up to 5km) and 16 waypoints to your favorite fishing spots, for example.
The Hydra Skypoint electric bow motor is easy to install, calibrate and start up. The motor can be mounted permanently on the boat or with a separate, optional quick-mount base (aluminum or nylon). Using the quick-mount base, the motor can be easily removed from the boat for storage, for example. The motor is supplied with a fully prepared connection cable with forklift connectors, making it very easy to start up the motor if the boat does not have fixed electrical outlets. A 60A fuse is recommended as an accessory between the cable and the battery.
Hydra Skypoint electric bow thrusters are suitable for use in fresh and salt water. Unlike normal Hydra Skypoint electric bow thrusters, the black “freshwater” versions are also equipped with a zinc anode to prevent corrosion of the motor.
- Operating voltage: 12V
- Thrust: 65 lb / 29.5 kg
- Composite sulfur pipe: Durable 54” / 137 cm
- Precision GPS Antenna: Specially designed for accuracy and reliability
- Wireless GPS remote control: Remote control with display, battery voltage indicator and battery level
- GPS sky anchor function: Holds the boat in place at a GPS coordinate, save up to 16 anchor points
- GPS course lock: Steer the boat to the desired compass direction
- GPS Route Driving: Record and play back up to 16 routes up to 5 km long
- GPS Cruise Control: Maintains a desired speed on a course or route
- Ready-made connection cable: Cable with truck connectors (approx. 2 m long)
- LED-illuminated battery level indicator: Shows battery charge on the control panel
- Current consumption: Max 50 A, typical in sky anchor mode 5-15 A
- Boat size: Suitable for boats with a length of 4.0–5.5 m
- Height adjustment: Easy and quick adjustment
- Quiet and efficient engine: Powerful 3-blade propeller
- Motor weight: 15 kg
- Anti-corrosion treatment: Zinc anode prevents corrosion
- Suitable for freshwater and seawater use
- Warranty: 2 years against material and manufacturing defectsAccessories and supplies:
Connections
- Suction hose: 10mm
- Vent: 16mm
- Stainless steel
- Volume 63L
- Dimensions 900x355x245 (LxWxH)
Avator 7.5e spare battery
Replaceable 1005Wh spare battery for the Mercury Avator 7.5e electric outboard motor. An extra battery gives you freedom, changing it takes seconds and you can continue your journey. The lithium-ion battery slides directly into place under the opening protective cover, and there is no need to connect any cables to it.
Designed for marine use, Avator lithium-ion batteries are safe and efficient 48-volt power sources built for adventure. They are water and marine-grade. An intelligent battery management system (BMS) monitors the batteries during charging and operation, helping to ensure optimal performance and safety. Each battery also features LED indicators to indicate battery charge status and an integrated carrying handle.
- Spare battery for Avator 7.5e motor
- Voltage: 48V
- Charging time with 110W standard charger: approx. 9 hours
- Charging time with 230W charger: approx. 4 hours (optional)
Adjustable stainless steel engine mount
Features:
- Maximum load: 30 kg
- Material: Mirror polished AISI 316 stainless steel
- Four adjustable positions for optimal positioning
- Ergonomic handle for easy height adjustment
- Durable and strong mounting plate
Dimensions:
- Mounting plate width: 190mm
- Total height: 290mm
- Mounting plate depth: 45mm
- Distance to first adjustment position: 110mm
- Mounting hole spacing: 115mm
- Maximum load 30 kg
- Four adjustable positions
- Stainless steel AISI 316
Engine: Evinrude 40-140HV
Blades: 3
Size (diameter/pitch): 13-1/4 x 17
Original part number: 176214
Trolling motor quick release foot
The universal Patriot Marine electric bow motor quick-mount base made of aluminum is suitable for use with the most common bow motors on the market (including Hydra, Minn Kota & MotorGuide). The quick-mount base allows the bow motor to be attached and detached from the bow of the boat easily and quickly. The quick-mount base has a place for a padlock, so the bow motor can also be locked to the boat. Mounting bolts are included in the package.
- Sturdy aluminum construction
- Universal model - compatible with Hydra, Minn Kota & MotorGuide electric bow thrusters, among others
- Mounting bolts included in the package
- Padlock slot
- Dimensions: 35 x 17 x 3.5 cm
- Sturdy aluminum construction
- Universal model - compatible with Hydra, Minn Kota & MotorGuide electric bow thrusters, among others
- Mounting bolts included in the package
- Padlock slot
- Dimensions: 35 x 17 x 3.5 cm
Seat foam pad
The noiseless Reduce® Seat Laminate is used as an original equipment product on many aluminum boats. This two-layer polyethylene foam provides excellent seating comfort, is water-resistant and prevents slipping on the boat.
Especially effective on aluminum surfaces, the product is extremely durable – it may even outlast the life of your boat. Enjoy comfort and performance on your boat day after day.
Easy to install with self-adhesive surface. Can be cut to desired shape and size.
- Supplied in sheets (750 mm x 1500 mm)
- Thickness approximately 5 mm
- With self-adhesive surface
Skypoint GPS electric bow thruster
The Hydra Skypoint 12V 65lb 54” is a GPS bow thruster with sky anchor function that gives you more time to focus on fishing. The easy-to-use and versatile Hydra Skypoint bow thruster allows you to navigate fishing grounds easily, environmentally friendly and almost silently.
Hydra Skypoint electric bow thrusters are equipped with a highly accurate GPS antenna, which ensures precise anchoring and precise route guidance. In addition to the sky anchor function, which is especially popular with casters, the device's versatile GPS functions can be utilized for route guidance and route recording, and can be used, like an autopilot, as an aid for trolling, for example.
The Hydra Skypoint 12V 65lb 54” is a 12 volt electric bow thruster equipped with a highly efficient 65 lb electric motor, a durable 54” composite propeller and a 3-blade propeller. The efficient and high-quality 65lb electric motor produces up to 20% more thrust compared to the most common 12 volt bow thrusters on the market. The 12 volt Hydra Skypoint bow thrusters are suitable for installation on most fishing boats of approximately 5 meters. A guide size range for a suitable boat size for the 12V 65lb 54” Hydra Skypoint bow thruster is approximately 4.0–5.5m in length and with a total weight of less than 700kg. The selection of the optimal size bow thruster is also influenced by the boat’s other characteristics and the operating environment (e.g. large surface area and windy/current conditions).
The Hydra Skypoint electric bow motor is very easy to use with the included wireless remote control. The remote control with a display makes it easy to control the motor and manage functions, even if visibility in the direction of the bow motor is poor. The remote control display allows you to monitor, for example, the current function, boat speed, bow motor battery voltage and the charge level of the remote control batteries. The remote control can also be used to program up to 16 routes (up to 5km) and 16 waypoints to your favorite fishing spots, for example.
The Hydra Skypoint electric bow motor is easy to install, calibrate and start up. The motor can be mounted permanently on the boat or with a separate, optional quick-mount base (aluminum or nylon). Using the quick-mount base, the motor can be easily removed from the boat for storage, for example. The motor is supplied with a fully prepared connection cable with forklift connectors, making it very easy to start up the motor if the boat does not have fixed electrical outlets. A 60A fuse is recommended as an accessory between the cable and the battery.
Hydra Skypoint electric bow thrusters are suitable for use in fresh and salt water. Unlike normal Hydra Skypoint electric bow thrusters, the black “freshwater” versions are also equipped with a zinc anode to prevent corrosion of the motor.
- Operating voltage: 12V
- Thrust: 65 lb / 29.5 kg
- Composite sulfur pipe: Durable 54” / 137 cm
- Precision GPS Antenna: Specially designed for accuracy and reliability
- Wireless GPS remote control: Remote control with display, battery voltage indicator and battery level
- GPS sky anchor function: Holds the boat in place at a GPS coordinate, save up to 16 anchor points
- GPS course lock: Steer the boat to the desired compass direction
- GPS Route Driving: Record and play back up to 16 routes up to 5 km long
- GPS Cruise Control: Maintains a desired speed on a course or route
- Ready-made connection cable: Cable with truck connectors (approx. 2 m long)
- LED-illuminated battery level indicator: Shows battery charge on the control panel
- Current consumption: Max 50 A, typical in sky anchor mode 5-15 A
- Boat size: Suitable for boats with a length of 4.0–5.5 m
- Height adjustment: Easy and quick adjustment
- Quiet and efficient engine: Powerful 3-blade propeller
- Motor weight: 15 kg
- Anti-corrosion treatment: Zinc anode prevents corrosion
- Suitable for freshwater and seawater use
- Warranty: 2 years against material and manufacturing defectsAccessories and supplies:
Noise-free Reduce® Tape completes your soundproofing in an elegant and effective way
The tape is made from the same material as the insulation boards, ensuring a clean and tight finish. This is the same solution used by Targa and other high-end boat manufacturers as their OEM solution.
Reduce® Tape is also particularly good for installing Reduce® Heat boards, as the thermal insulation material contains glass fibers, and with the tape you ensure that the installation is tight and durable.
The tape is designed to complement your insulation solution and ensure it stays in place and performs optimally. It is also easy to use, making installation quick and easy.
- Color: white
- Length: 10m
Heavy Layer Soundproofing Board
Reduce® Heavy Layer is an essential part of soundproofing on a boat. It does not contain the smell of bitumen, so it is pleasant not only to the ears but also to the nose. This makes it a perfect choice for cockpits, cabins and bilges.
The product comes with a high-performance adhesive that ensures excellent adhesion even in the most demanding conditions, such as humid or hot environments. This makes it a reliable and durable solution for soundproofing boat interiors.
- Supplied as plates
- Sheet size: 495 mm x 1100 mm
- Average sound reduction (3 mm, 7.5 kg/m²): 35.2 dB(A) when mounted on 15 mm plywood.
- Standard thickness: 3 mm (7.5 kg/m²)
- With self-adhesive surface.
Reduce Heat fire insulation board
Noiseless Reduce® Heat is designed to keep your boat cool and protect soundproofing materials from hot engine parts such as the turbocharger or exhaust riser. This material is highly resistant to high temperatures and provides excellent protection from both heat and fire. It is perfect for locations where thermal insulation and protection from high temperatures are required, such as engine bays, exhaust handling and other hot areas in a boat or vehicle.
An excellent choice for parts of the boat's engine compartment that are exposed to extremely high temperatures, preventing damage and extending the life of soundproofing materials. It helps ensure that the soundproofing material is not damaged by excessive heat and maintains its effectiveness for longer.
- Supplied as plates
- Sheet size: 400 mm x 480 mm
- Thickness: 7 mm
- Weight: approx. 2 kg/m²
- Temperature resistance: 2 hours 180 °C, radiant heat 250 °C
- Fire rating: Self-extinguishing, FMVSS 302 and ECE R118; Annexes 6, 7, 8 and 9.
- Thermal conductivity ISO 8301 [W/mK]: 0.035
Reduce Bitumen soundproofing board
Reduce® Bitumen is designed for areas exposed to moisture – especially on the outside of a boat. It comes with a high-performance adhesive that works especially well on metal surfaces. When warm, the material is very flexible and easy to shape.
This product is a great choice for the exterior of a boat or other areas where durable sound insulation and protection from moisture are required. In addition, its elasticity makes installation quick and easy. It is specifically designed for use with surfaces such as plywood and will significantly improve noise levels.
- Supplied as plates
- Sheet size: 400 mm x 1000 mm
- Thickness 4 mm (7.5 kg/m²)
- Average sound reduction 35.1 dB(A) when mounted on 15 mm plywood
- With self-adhesive surface
Soundproofing board
Reduce® Basic is made from recycled foam plastic and offers excellent sound insulation, protecting against loud engine noise. A handy and versatile board for soundproofing, especially in boats and vehicles where both effective sound insulation and fire safety are required. The product is easy to install with a self-adhesive backing, making installation quick and easy.
This product is an environmentally friendly choice if you want to reduce noise pollution in your boat or vehicle while enjoying hassle-free installation.
You will achieve the best possible sound insulation by combining this with the Meluton Reduce Pro A8 sound insulation board.
- Supplied as plates
- Sheet size: 495 mm x 1000 mm
- With self-adhesive surface
- Standard thickness 30 mm
- Estimated weight 3 kg/m²
- The surface is water-repellent and black
- Self-extinguishing, can be used as soundproofing in vehicles and engine rooms on CE-approved pleasure boats
- The product meets the requirements of FMVSS 302 fire classification
Lenco Pro Control Auto 9x12 – Automatic trim tabs for smoother operation
Delivery contents:
- 1 pc Pro Control Auto keyboard (compatible with NMEA2000, Lenco 2000 and Mercury SmartCraft systems)
- 1 pc Pro Control IMU
- 2 pieces of stainless steel (304, thickness 2.7 mm) trim panels
- 2 pcs trimpan cylinders, 2.25 inch stroke, with 1.8 meter cables and Deutsch quick connectors
- 6 pcs Micro C T-connectors
- 1 pc Micro C power cable with fuse
- 2 pcs 6ft Micro C drop cables
- 1 pc 15ft Micro C drop cable
- 1 pc 25ft Micro C drop cable
- 2 pcs 6-pin Deutsch–Micro C adapter cable for cylinder network
- 2 x 3-foot Pro Control cylinder power cables
- 2 Wake Signal adapters for systems without Mercury control
- 2 pcs of top mounting brackets
- 2 pcs lower mounting brackets
- Lenco 2K backbone network package
Specifications:
- Type: Standard Mount trim tabs (original model)
- Voltage: 12V
- Dimensions (length x depth): 9 x 12 inches
- Recommended boat length: 16–25 feet
- Hinge height: 5.1 cm (2")
- Minimum transom height: 35.6 cm (14")
- Control panel: Automatic
- Automatic trim levels
- Reduces tilting and bouncing
- Suitable for boats with a length of 4.9-47.6 meters
Lenco Pro Control Auto 12x12 – Automatic trim levels for smoother operation
Delivery content
- 1 pc Pro Control Auto keyboard (compatible with NMEA2000, Lenco 2000 and Mercury SmartCraft systems)
- 1 pc Pro Control IMU
- 2 pieces of stainless steel (304, thickness 2.7 mm) trim panels
- 2 pcs trimpan cylinders, 2.25 inch stroke, with 1.8 meter cables and Deutsch quick connectors
- 6 pcs Micro C T-connectors
- 1 pc Micro C power cable with fuse
- 2 pcs 6ft Micro C drop cables
- 1 pc 15ft Micro C drop cable
- 1 pc 25ft Micro C drop cable
- 2 pcs 6-pin Deutsch–Micro C adapter cable for cylinder network
- 2 x 3-foot Pro Control cylinder power cables
- 2 Wake Signal adapters for systems without Mercury control
- 2 pcs of top mounting brackets
- 2 pcs lower mounting brackets
- Lenco 2K backbone network package
Specifications
- Type: Standard Mount trim tabs (original model)
- Voltage: 12V
- Dimensions (length x depth): 12 x 12 inches
- Recommended boat length: 17–30 feet
- Hinge height: 5.1 cm (2")
- Minimum transom height: 35.6 cm (14")
- Control panel: Automatic
- Automatic trim levels
- Reduces roll and pitch
- Suitable for boats with a length of 5.2-9.1 meters
Class 3 – suitable for locking boats over 200kg.
- Class 3
- Pack of 3
- Similar locks
Connections
- Suction hose: 10mm
- Vent: 16mm
- Stainless steel
- Volume 49L
- Dimensions 700x355x245mm (L x W x H)
- Made of polyethylene, with UV-stabilizing additives.
- Built-in mechanical venting in the ergonomically designed tank cap.
- Stable 6-inch wheels improve mobility.
- The ergonomic design and durable handle make it easy to carry.
- Meets DOT and UN requirements for transporting liquids.
- Fuel pump with handle
- Volume 53 liters
- For gasoline
- Dimensions 860x400x350mm
