Electric water pumps
Water pumps for 12 V and 24 V systems from the online store!Tuoteryhmät
Electric water pumps -ryhmän tuotteet
Kampanja
The Aqua Jet WPS 5.2 from Johnson Pump is a five-chamber diaphragm pump that is ideal for pressurized water in boats, RVs and caravans. It is significantly quieter than traditional three- and four-chamber kitchen pumps and offers a consistent flow with low power consumption.
When the pump starts, it quickly builds up pressure to 2.8 bar (41 psi). At this pressure, it automatically switches off thanks to the built-in pressure monitoring (pressure switch). The pump's check valves ensure that the pressure is maintained even if the pump switches off. When the tap is opened, the pressure drops and the pump automatically switches on again.
The pump is self-priming and can withstand dry running without damage. It is recommended to use a water filter before the pump and an accumulation tank afterwards for best performance and efficiency.
NOTE! The pressure is adjusted at the factory. Adjusting the pressure switch will void the warranty.
When the pump starts, it quickly builds up pressure to 2.8 bar (41 psi). At this pressure, it automatically switches off thanks to the built-in pressure monitoring (pressure switch). The pump's check valves ensure that the pressure is maintained even if the pump switches off. When the tap is opened, the pressure drops and the pump automatically switches on again.
The pump is self-priming and can withstand dry running without damage. It is recommended to use a water filter before the pump and an accumulation tank afterwards for best performance and efficiency.
Specifications:
- Voltage: 24V
- Flow: 20 L/min (5.2 GPM)
- Maximum pressure: 2.8 bar (41 psi)
- Hose connections: 12.5 mm or 19 mm (1/2" or 3/4")
- Suction height: 2m
- Maximum liquid temperature: +50°C
- Dimensions: 240 x 214 x 110mm
- Weight: 2kg
- Recommended fuse: 8A
- Manufacturer's warranty: 3 years
NOTE! The pressure is adjusted at the factory. Adjusting the pressure switch will void the warranty.
- 20 l/min
- 2.8 Bar
- 24 Volts
Kampanja
Jabsco Par-Max 2: efficient
pressure water pump for boats
The Jabsco Par-Max 2 is a versatile and efficient pressure water pump designed specifically for the demanding conditions of boats.
Its compact design and reliable performance make it an excellent choice for both small and medium-sized water systems. This pump is designed to handle 1-3 outlets, ensuring its suitability for a variety of applications. This pump is equipped with automatic pressure sensing, making its operation intuitive and maintenance-free. The sensing system ensures that the pump automatically starts and stops according to water usage, increasing user comfort and minimizing energy waste. In addition, its dry-running resistance ensures a longer service life. The Jabsco Par-Max 2 is the perfect choice for those looking for a durable and long-lasting solution to improve their water system. Its reliability and top-notch features meet the demands of both professionals and hobbyists. Choose the Jabsco Par-Max 2 if you need efficiency even in challenging conditions.
Quiet operation and vibration dampening
features
The Jabsco Par-Max 2 pressure water pump has been developed with user comfort in mind. Its vibration-damping rubber feet significantly reduce the amount of vibration and noise during operation. This makes the pump much more comfortable to use, especially during long periods of use. Thanks to the integrated bypass module, the pump provides a smoother flow and minimizes unwanted noise. This feature allows the water flow to remain consistent and quiet, even when water consumption varies. The module also reduces pressure peaks, which increases the overall reliability of the system. Reducing noise levels is particularly important in boating, where a quiet environment is a big part of the comfort of use. The Jabsco Par-Max 2 pump meets this requirement perfectly, and its quiet operation makes it an ideal choice for confined spaces, such as boats and RVs.
Technical data: capacity, pressure and voltage
The Jabsco Par-Max 2 offers excellent performance features that meet the needs of boaters. Its maximum capacity is 7.6 liters per minute (2 GPM), which is perfect for compact water systems where a steady and sufficient water flow is required. The pump operates at 35 PSI (2.4 BAR), which ensures reliable water pressure for showers, taps and other water consumption points. This pressure section ensures that the water flows smoothly without interruptions or pressure fluctuations. The pump operates on 12 V, which is standard for boats and other recreational vehicles. The pump is designed to withstand a maximum current consumption of up to 6 amps and is supplied with a recommended 10A fuse. Thanks to these technical features, the pump combines performance and energy efficiency.
Frequently Asked Questions about the Jabsco Par-Max 2 Pump
- How many outputs does the pump support? The pump has 1-3 outputs, which is suitable for various boat water systems.
- Can the pump withstand dry running? Yes, the Jabsco Par-Max 2 is designed to withstand dry running conditions, which protects the pump from damage.
- Is a filter included? Yes, the pump comes with a filter, which is equipped with convenient quick connectors for easy installation.
- What power supply does the pump use? The pump operates on 12 V DC, which is common in boats and motorhomes.
- What size hose connection does the pump have? The pump has 2 x 13 mm (1/2') hose connections, which are suitable for most common hose systems.
Easy installation with quick connectors and filter
The Jabsco Par-Max 2 pressure water pump is designed to be user-friendly, so that it can be put into operation quickly and effortlessly. The pump has integrated quick connectors that make it easy to connect both the inlet and outlet hoses without the need for separate tools. The included filter ensures that the system remains clean and that the water flows without any disturbances. The quick-release filter increases user-friendliness and allows it to be easily cleaned or replaced as needed. This reduces the risk of blockages and extends the life of the pump. The pump's compact size (length 231 mm, width 107 mm, height 107 mm) allows it to be installed even in tight spaces, such as in boat engine rooms or cabinets. The user does not need to be a professional to get the pump ready for use - the simple installation process ensures that the Jabsco Par-Max 2 is ready for operation as soon as it is connected to the water system.
- 7.6l/min
- 2.4 Bar
- 12V
- Automatic pressure detection
Kampanja
Johnson Pump Aqua Jet water pressure pump 12V
Key features of the Johnson Pump Aqua Jet pressure water pump
The Johnson Pump Aqua Jet pressure water pump represents reliable and quiet functionality, specially designed for small and medium-sized boats. The pump's unique five-chamber system allows for a uniform water flow throughout the system, ensuring optimal pressure in both fresh and salt water systems. The pump's compact size and durable structural design make it a practical and long-lasting solution for marine needs. The quiet operation feature makes the Johnson Pump Aqua Jet pump ideal for boating, as it reduces noise pollution and improves travel comfort. In addition, this pressure water pump is able to operate efficiently even at low speeds, ensuring a smooth water flow without interruptions in pumping. This makes the device perfectly suited for shower systems, tap water systems and other water fixtures on boats. The pump has also been designed with ease of use and reliability in mind. Equipped with a powerful motor, the Aqua Jet guarantees excellent performance in all conditions and has a built-in cut-off function that protects the pump from overpressure. These technical advantages make the Johnson Pump Aqua Jet one of the most reliable options for pressurized water systems.
Five-chamber self-priming system and its advantages
The five-chamber self-priming system used in the Johnson Pump Aqua Jet pump offers significant benefits. The self-priming mechanism ensures the pump operates quickly and efficiently, allowing the system to deliver water evenly even when there are elevation differences or other flow pressure obstacles. This makes the pump particularly useful in boat systems where the elevation differences in the water distributions can vary. The five-chamber design maximizes pumping efficiency and prevents uneven water flow. When water is used at low flow rates, the chamber design ensures that no pulsating action occurs, which promotes smooth system operation and reduces potential noise. In addition, this design increases the longevity of the pump by minimizing mechanical stress and wear. In addition to its functionality, the five-chamber system improves safety and protects the internal components of the pump. This feature makes the device maintenance-free and stable in capacity, even in less than ideal ambient conditions. This type of system is particularly well suited for freshwater and saltwater systems on boats, where consistent and reliable water pressure is absolutely essential.
Model options: WPS 2.4, WPS 2.9, WPS 4.0 and WPS 5.2
The Johnson Pump Aqua Jet pressure water pump is available in four different models, offering versatile solutions for different water application needs. The models differ in capacity, power and weight, so customers can choose the option that best suits their boat and operating environment.
- The WPS 2.4 is a compact and efficient model offering a capacity of 9 liters per minute and is designed specifically for small vessels. Its motor power is 85 W and it weighs only 1.6 kg, making it lightweight and easy to install.
- The WPS 2.9 takes the features further by offering an 11 liter flow capacity, but with cost-effective energy consumption.
- The WPS 4.0 and WPS 5.2 are suitable for larger boats or situations where the water demand is higher. For example, the WPS 5.2 offers a 20 liter per minute capacity and 150 W motor power. Although these models are slightly larger and heavier, their performance meets even the most challenging needs, such as the simultaneous use of multiple water points in the system.
Technical data for fresh and saltwater systems
Johnson Pump Aqua Jet pressure water pumps are designed to support both fresh and salt water systems, making them versatile in a variety of environments. Most models include a 2.8 bar pressure cut-off function to protect the system from overpressure situations. This increases safety and prevents excessive stress on components in marine systems. Technically, the flow capacity per model varies between 9 and 20 liters per minute, allowing the devices to be used in both smaller domestic water systems and larger water equipment combinations. Recommended fuse sizes vary from 10 amps to 15 amps depending on the model, and the weight and physical dimensions of the devices have been optimized to fit into small spaces and difficult-to-access installation locations. The material choices support reliability even in salt water use, as the pumps are designed to withstand corrosion and other challenges associated with the marine environment. This ensures that Johnson Pump Aqua Jet pressure water pumps remain operational and reliable even under the most demanding operating conditions.
Frequently Asked Questions (FAQ) about Johnson pressure water pump
- What maintenance does the Johnson Aqua Jet pressure water pump require? Johnson pumps are maintenance-free, but we recommend checking the hoses and fittings for leaks regularly and flushing the system with fresh water after using salt water.
- Do Aqua Jet models have overload protection? Yes, all models have a pressure switch (2.8 bar) that protects the pump from overpressure and keeps the system safe.
- Can the pump be used with multiple water points at the same time? Yes, especially the WPS 4.0 and WPS 5.2 models are suitable for simultaneous use of multiple water points due to their high capacity.
Kampanja
Johnson-Pump Aqua Jet WPS is a five-chamber pressure water pump that ensures the most even flow possible. Built-in pressure switch. The pump is very quiet compared to traditional three- and four-chamber pressure water pumps. The pump is equipped with quick-connect fittings for easy maintenance. It is recommended to use a water filter before the pump and a pressure tank after it to ensure best performance. Connections 12.5 or 19mm.
- 13l/min
- 2,8 Bar
- 12V
- Type: WPS 3.5
- Fuse: 10A
- Lenght: 236mm
- Width: 210mm
- Height: 116mm
Johnson Pump Aqua Jet water pressure pump WPS 2.9 11L/min 24V
Five-chamber design ensures even water flow
The Aqua Jet WPS 2.9 pressure water pump features an innovative five-chamber design that allows for a much smoother water flow compared to more traditional three- and four-chamber diaphragm pumps. This design advancement makes the pump an excellent choice for a variety of pressurized water systems where a smooth and uninterrupted flow is critical. The five-chamber design of the pump minimizes fluctuations in the water flow, which improves user comfort when using a shower, faucet or other water-using devices, for example. This means that the Aqua Jet pump works perfectly in both boating and motorhome applications where reliability is paramount. In addition, this design provides better performance with low energy consumption. The Aqua Jet WPS 2.9 pump is designed to withstand long-term use and demanding conditions without compromising performance or stability.
Quiet and efficient solution for pressurized water systems
The Aqua Jet WPS 2.9 is specially designed for quiet operation, which makes it a much more pleasant alternative to noisier pumps. Whether it's a peaceful night on a boat or a relaxing holiday in a motorhome, the Aqua Jet's discreet sound level will not disturb the operating situation. The energy-saving motor used in the pump, combined with the five-chamber design, delivers high performance with low noise levels. In addition, the pump is equipped with built-in overload protection, which provides additional safety during long-term use. The efficiency of this pump is also reflected in its capacity - a flow of 11 liters per minute is enough to cover the water usage needs of most users, while maintaining a consistent water pressure. The Aqua Jet WPS 2.9 is a safe and durable choice that ensures the functionality of your pressurized water system in all conditions.
Recommendation: use a pressure tank and PUMProtector filter
For optimal use of the Aqua Jet pump, we recommend using a pressure tank, which will further improve the system's performance. The pressure tank helps to smooth out fluctuations in water pressure and increases the pump's service life by reducing the number of start-up and stop phases. It is recommended to install a PUMProtectorTM filter on the suction side, which protects the pump from impurities such as damage caused by sand or other solid particles. Using a high-quality filter ensures trouble-free and long-lasting operation of the pump, especially in demanding conditions. Also, remember to check that all hose connections and installations are tight, so that the system's performance remains optimal. By following these recommendations, you will ensure top-class operational reliability of the Aqua Jet WPS 2.9 pump.
Technical specifications: flow capacity, voltage and performance
- Flow capacity: 11 liters per minute (2.9 GPM), which ensures sufficient water flow for most pressurized water systems.
- Voltage and power: 24 volt system using an 85 W motor – a powerful yet energy-efficient solution.
- Cut-off pressure: 2.8 bar (41 psi), which maintains a constant pressure regardless of fluctuations in water usage.
Other technical features include excellent material solutions, such as Santopeni membranes and EPDM valves, which provide high performance and durability. The pump body is made of durable PP/PPA material, which is resistant to wear and corrosion. In addition, the Aqua Jet WPS 2.9 is equipped with user-friendly hose connections: 1?2" BSP and 3?4" hose connections (approx. 13 and 19 mm), which makes it compatible with a wide range of installation systems. The pump has a recommended fuse rating of 5 A, which protects the electrical system from overloads.
Frequently asked questions about the Aqua Jet WPS 2.9 pump
- Can the Aqua Jet WPS 2.9 pump be used without a pressure tank? Although the pump can be used without a pressure tank, we strongly recommend using one, as the pressure tank reduces the strain on the pump and extends its service life.
- What accessories do I need to install the Aqua Jet WPS 2.9? We recommend installing a PUMProtectorTM filter on the suction side of the pump to protect against impurities. In addition, ensure the hose connections are the correct size (1?2" or 3?4").
- Is the Aqua Jet WPS 2.9 suitable for seawater use? Yes, the materials used in the pump's construction, such as EPDM valves and Santopeni diaphragms, are highly resistant to wear and tear caused by salt water.
- Mallini: Aqua Jet WPS 2.9 24V
- Baldness: Santopenia
- Valves: EPDM
- Run: PP/PPA
- Engine: 85W
- Flow: 11 l/min – 2.9 GPM
- High pressure: 2.8 bar – 41 psi
- Destroyed: 5 A
- Letters: BSP/letter 1?2" n. 13 mm, 1?2" BSP 3?4" letter n. 19 mm
JUNE DEAL
Johnson Pump Aqua Jet washer pump set 13L 12V
Technical features of the Aqua Jet washer pump series
The Johnson Pump Aqua Jet series of washer pumps are designed for efficient and reliable water delivery. This pump offers a flow capacity of up to 13 liters per minute (3.5 GPM), making it an excellent solution for a wide range of water supply needs. With a maximum pressure of 5 bar (70 psi), the washer pump can handle even the most demanding tasks without compromising on performance.
deterioration. The series is optimized to work with 12-volt electrical systems, which allows it to be widely used in boating, motorhomes and other mobile applications. The pump uses advanced Aqua Jet technology, which minimizes noise and vibration, thus providing a more pleasant operating experience. Its compact size makes it easy to integrate the pump into various systems, saving space. The Aqua Jet washer pump also has high-quality internal protection mechanisms that prevent overloading and ensure reliable operation of the device over long periods of use. This makes
making it an excellent choice for users who value durability and performance.
Contents and included parts
The washer pump set includes everything you need for installation and quick system commissioning. The package includes the Aqua Jet WD 3.5 washer pump, which acts as the heart of the set, and which allows optimal use of flow and pressure. The set comes with a high-quality inlet filter that protects the pump from impurities and enables its long-term use. In addition, the package includes a suitable cover for the pump, which protects the device from mechanical damage and environmental factors. The included flushing nozzle and 7.5 meter hose make water transfer and use easy and hassle-free. All components are built to withstand heavy use. They are specially designed to work together seamlessly, so that the whole meets the highest expectations for water supply and washing needs.
Applications and compatibility
The Johnson Pump Aqua Jet washer pump series is the ideal choice for a wide range of applications.
applications. It is particularly suitable for boat flushing systems where efficient and consistent water use is required for washing or other needs. The series is also ideal for filling and emptying water tanks in motorhomes, as its compact size and excellent performance allow it to be used in smaller systems. The series offers reliable operation as part of other electrical water systems, such as garden irrigation systems or industrial applications where a solution compatible with a 12 volt system is required. Aqua Jet is compatible with most water pumping and flushing systems, making it versatile and easy to adapt. The product is suitable for use with both purified drinking water and process water, and its performance does not suffer even with continuous use. However, make sure that the water used in the system is purified to ensure that the internal components remain in good condition for a long time.
Installation instructions and maintenance tips
The installation of the washer pump is designed to be easy and quick. Start by making sure that the electrical system is 12 volt compatible. Attach the included inlet filter to the pump according to the instructions to protect the unit from impurities. Install the hose and rinse nozzle in place so that all connections are tight and prevent water leakage. If necessary, attach the pump cover to the installation site to ensure separate stability and protect the unit from mechanical damage during the installation phase. Keep the pump in a dry place and ensure that the surrounding space allows for adequate ventilation during operation.
Commissioning is done by connecting the pump to the power supply using a suitable connection and performing a test check before starting actual use. For maintenance, we recommend regular cleaning of the inlet filter and checking the hoses for wear or blockages. Avoid using liquids containing chlorine and dirty water, as they may damage the internal parts of the pump. If the pump shows signs of reduced performance, check the electrical connections and the tightness of the pump system before taking further action.
Frequently Asked Questions (FAQ)
- Can this pump be used with seawater? Yes, but make sure all parts are rinsed with fresh water after use to avoid corrosion caused by salt.
- Is the pump designed for continuous use? The pump is designed to operate for long periods of time, but we recommend taking short breaks during longer periods of use to prevent overheating.
- How far can you move water with this pump? In addition to the 7.5 meter hose, the pump can move water up to 10 meters without any significant loss of performance. However, increasing the hose length may reduce water pressure.
- 13 liters per minute
- 5 bars
- 12 volts
Kampanja
Johnson Pump Aqua Jet Washer Pump Set 20L 12V
Key features of the Aqua Jet wash pump series
The Johnson Pump Aqua Jet 20L 12V washing pump set offers a compact and efficient solution for versatile water cleaning. The package includes everything you need for immediate installation and use, such as the Aqua Jet 5.2 high-pressure pump itself, as well as the PUMProtector strainer filter. This makes it a complete package for various washing needs. The design of the washing pump set has paid attention to both performance and usability. The device is particularly suitable for boating, cottages, or other needs that require reliable and strong water pressure. The Aqua Jet series belongs to the category of electric water pumps and can be safely used with a voltage of 12 volts. Johnson Pump's high-quality materials and innovative design make this washing pump set long-lasting and wear-resistant. The pump is designed for long-term use, and all the accessories included have been carefully manufactured to maintain the best possible functionality.
High-pressure pump and its performance
The Aqua Jet 5.2 high-pressure pump is the heart of this series. Its maximum pressure of 5 bar and a flow rate of up to 20 liters per minute ensure that washing jobs are carried out efficiently and effortlessly. This performance allows the use of strong water pressure even in demanding conditions. The pump operates stably and safely even in continuous use, making it an ideal choice for both household and boat maintenance. The motor is equipped with overload protection, which increases operating safety and extends the service life of the device. The water pressure remains constant throughout the entire operating time, ensuring a strong washing result. The PUMProtector strainer filter prevents dirt and other particles from entering the pump, which protects the device components and reduces the need for maintenance. This innovative filter system increases the durability of the pump and ensures that it operates optimally even in challenging conditions.
Installation and operating instructions for the Aqua Jet series
The Aqua Jet washing pump is designed to be user-friendly and simple to install, making it suitable for those with less technical installation experience. The clear instructions included in the package make it quick and easy to get the device ready for use. All necessary parts, such as hose connectors and a switch panel, are included. During installation, it is recommended to pay special attention to the installation of electrical connections and the water intake system. The 12-volt power supply is suitable for the device and it is important to ensure that the wiring is carried out correctly during installation to ensure safety. The fuses included with the switch panel prevent the risk of short circuits. Operation is intuitive and efficient - the illuminated switch panel allows easy control of the washing pump even in the dark. The washing hose and washing gun are quickly attached, allowing you to start the device and start washing immediately.
Frequently Asked Questions (FAQ) about the Aqua Jet wash pump
- Can the Aqua Jet wash pump be used with seawater? Yes, but it is recommended to flush the system with fresh water after use to avoid corrosion damage.
- What kind of maintenance does the device need? It is recommended to check and clean the filter regularly. It is also worth assessing the condition of the hoses and connections from time to time and replacing worn parts.
- How far does the washing hose reach? The spiral hose included in the washing package is 7.5 meters long, which provides sufficient reach for most washing needs.
Washing gun, hoses and accessories included in the package
The Aqua Jet series comes with a comprehensive range of accessories that make using the device effortless. The package includes an ergonomic spray gun that ensures a comfortable grip and precision. The gun has an adjustable valve that allows you to control the water flow as needed. The included 7.5 meter spiral hose offers flexibility and durability for situations where the washing area needs to be changed frequently. The hose material is designed to withstand high water pressure and long-term use. The wall-mounted hose connector with shut-off valve adds
convenience and allows quick connections of the washing hose. The package also includes the PUMProtector strainer filter, as well as other connection parts needed to assemble a complete washing system. This ensures that
that everything you need is in one package, so the device is ready to use immediately without additional purchases.
Kampanja
Johnson Pump CM10P7 circulation pump 12V
Magnetic drive design and low power consumption
The Johnson Pump CM10P7’s magnetic drive design ensures long life and reliable operation by minimizing mechanical wear. This innovative design improves pump performance and ensures that the pump runs smoothly even over longer duty cycles. The magnetic drive design means fewer moving parts are required, reducing maintenance and increasing user comfort.
The pump has been designed with special attention to low power consumption, making it an ideal choice for energy-efficient systems. The maximum power input is only 14 watts, which allows for long operating times without significant energy consumption. This feature makes the pump particularly suitable for situations where continuous or long-term operation is required.
The IP67 rating ensures the pump is suitable for demanding conditions, as the design is dust and water resistant. The device is also equipped with a ball-bearing permanent magnet motor, which provides excellent power and reliability in both heating and cooling systems.
High fluid flow for heating and
for cooling systems
With a high maximum flow of 18.5 litres (0.1 bar), the Johnson Pump CM10P7 provides efficient fluid circulation in both heating and cooling systems. This makes the pump an excellent choice for a wide range of applications where temperature balancing and optimisation of heat transfer are key. The pump is also suitable for circulating fresh water or water-glycol mixtures, which increases its versatility. The pump has an impressive operating temperature range, operating reliably at minimum temperatures of -40°C and liquid temperatures of up to +100°C. This wide temperature range makes the pump perfect for use in harsh climates and complex cooling and heating systems. The CM10P7 can withstand system pressures up to a maximum of 2.5 bar, making it suitable for both domestic and commercial installations. Whether heating in a dishwasher or optimising cooling in a vehicle system, this pump delivers stable and efficient performance.
Technical specifications: Johnson Pump CM10P7 12V circulation pump
- Body material: PPA-resistant plastic
- Impeller: PPA thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC, ball bearing, IP67 rated, permanent magnet motor
- Operating fluid: Water/glycol mixture (max. 60% glycol) or fresh water
- Liquid temperature: Minimum -40 °C, maximum +100 °C
- System pressure: Maximum 2.5 bar
- Hose connections: Diameter Ø 20 mm (3/4")
- Dry use: Allowed for a maximum of 30 minutes
- Input power: Maximum 14 W
- Output: 18.5 liters/minute (0.1 bar)
- Installation: Universal mounting foot for flat surface
Installation instructions and compatibility with different systems
The Johnson Pump CM10P7 is designed to be user-friendly to install, with the included universal mounting foot suitable for mounting on almost any flat surface. This makes the pump very flexible in a variety of system configurations. It is important to position the pump so that the liquid flows freely and avoid angles that could cause flow disturbances.
The hose connection (Ø 20 mm, 3/4”) allows compatibility with most standard pipework. Furthermore, the pump is designed to operate efficiently in both small domestic environments and large industrial systems. It is important to choose the right operating system for the pump’s characteristics, such as water temperature and pressure ranges. Dry running of the pump is only permitted for short periods (up to 30 minutes), but this possibility can facilitate the installation and testing phase. Remember to check that the pump liquid is of the correct type – water or a water-glycol mixture with a glycol content of up to 60% will ensure the best performance and longevity of the pump.
Frequently Asked Questions (FAQ) about Johnson Pump CM10P7
- Can the pump be used in winter conditions? Yes, the pump is designed to operate in minimum temperatures of -40°C, making it ideal for cold environments.
- Is the pump durable in continuous use? Absolutely. The IP67-rated motor and ball bearing construction ensure the pump's durability even in continuous use.
- Can I use water and glycol mixture in the pump? Yes, the pump is compatible with water/glycol mixture, but the glycol concentration should not exceed 60%.
- How to mount the pump? The pump is mounted using the included universal mounting foot, which is designed for mounting on flat surfaces.
- How long does the pump last? The exact lifespan of the pump cannot be determined, but its durable construction, low power consumption and low wear and tear guarantee a long service life if properly maintained.
- Pump body: PPA, Thermoplastic
- Impeller: PPA, Thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC protection IP67 permanent magnet, ball bearing motor, designed for continuous use
- Fluid: Water/glycol mixture max. 60% glycol, fresh water
- Liquid temperature: Min -40°C, Max +100°C
- System pressure: 2.5 bar max
- Hose connections: Ø 20mm (3/4")
- Dry use: Max. 30 minutes
- Input power: Max 14W
- Installation: separate universal mounting foot for flat surfaces
- Output: 18.5l/min - 0.1 bar
Kampanja
Johnson Pump circulation pump CM10P7 12V 16mm
The Johnson Pump CM10P7 is a high-quality magnetically coupled circulator pump designed for long-lasting, reliable operation. It provides an efficient solution, especially for boating, caravans and other vehicle applications. Below is a more detailed description of the pump's features, construction and performance.
Key features of a magnetically coupled pump
The Johnson Pump CM10P7 utilizes magnetic coupling technology, which enables reliable performance and minimizes mechanical wear. The magnetic coupling prevents direct contact between metal components, reducing friction and extending the pump’s service life. This innovation makes the pump an excellent choice for users looking for a maintenance-free and energy-efficient solution. The pump can run dry for up to 30 minutes, reducing the risk of damage in the event of installation or operating errors. This feature is particularly useful in situations where the water supply is not continuous, such as on boats or in water distribution systems. In addition, the CM10P7 pump is rated for up to 5,000 hours, making it an excellent investment for long-term use. The pump’s power supply requirements are optimized for 12 volts, allowing it to be used with most common vehicle and marine battery systems. In addition, the 16 mm connections and the ability to handle 15 liters of water per minute ensure that the pump meets key flow requirements.
Durable construction and long service life
The CM10P7 pump is designed to withstand harsh conditions. Its bearing-mounted permanent magnet motor ensures optimal performance over the long term and prevents excessive wear of mechanical parts. The motor design has been designed to minimize the risk of overheating and corrosion, which increases the reliability of the product even in challenging environments. The pump's compact and sturdy design (177 mm x 62 mm) allows it to be installed even in tight spaces without compromising on performance. The housing is made of durable materials that are highly resistant to moisture, temperature fluctuations and vibrations. This makes the pump particularly suitable for wet marine environments or other humid operating conditions. One of the essential advantages of the pump is its long nominal service life, which reaches up to 5000 hours. This means that repairs or replacements do not have to be made frequently, saving both time and money. The durable design and long service life make the Johnson Pump CM10P7 a wise and long-lasting investment.
Installation options and deployment
The Johnson Pump CM10P7 is designed to be as versatile as possible in terms of installation. It can be installed either with the inlet flow or can be filled before start-up, depending on the application needs and system design. This flexibility helps adapt the pump to a wide range of applications.
The pump's 16 mm hose connections make connecting it to the rest of the water distribution system simple and time-saving. The clear design and compact dimensions reduce installation challenges, and the included instructions streamline commissioning. Whether it's a boat, camper or other vehicle, the CM10P7 is easy to integrate into your existing system.
When commissioning, it is important to ensure the correct 12 volt power connection, which ensures safe and efficient operation of the pump. The pump starts quickly and is immediately ready for an efficient flow cycle without complex adjustments. This makes the CM10P7 a user-friendly choice even when quick installation is required, for example in temporary systems.
Frequently Asked Questions (FAQ) about Johnson Pump CM10P7
- Can the pump run dry? Yes, the pump can withstand up to 30 minutes of dry running without damage. This is an important feature in situations where the water supply may be uncertain.
- Is the pump suitable for continuous use? Yes, the CM10P7 is designed for continuous use. Its long service life and durable construction make it a reliable choice for long-term projects.
- Does the pump require any special maintenance? No special maintenance is required, thanks to the magnetic clutch technology and durable materials. Basic maintenance measures include regular cleaning of the device and checking for proper power connection.
- What is the maximum flow rate of the pump? The maximum flow rate of the pump is 15 liters per minute, which is sufficient for most circulating water systems and other similar applications.
- What are the structural dimensions of the pump? The pump measures 177 mm x 62 mm and has 16 mm connection sizes, making it compact yet efficient.
Engine performance and continuous operation
The permanent magnet motor used in the CM10P7 offers robust performance even in continuous operation. The motor is specifically designed to withstand high consumption and reduce energy consumption, making it an economical and ecological choice. In addition, its performance remains stable over the long term. The motor is equipped with precision bearings that ensure quiet and smooth operation regardless of environmental conditions. Thanks to the bearing-mounted design, the motor minimizes vibration and mechanical stress, which contributes to the durability and reliability of the pump. This feature makes the CM10P7 an excellent choice for use in, for example, boat circulation systems, where vibration and movement can affect the service life of components. Continuous operation is no problem for the CM10P7, as it is designed to withstand long duty cycles and changing flow requirements. Its efficient power consumption and durable design make it one of the most popular 12V pumps on the market, meeting both domestic and
for the needs of professional users.
- Magnetically coupled pump
- Available in three different sizes
- 12V
- Connectors 16mm
- 15L/min
- Length 177mm
- Width 62mm
Kampanja
Johnson Pump circulation pump CM30P7 12V 20mm
Durable and efficient design of the magnetically coupled pump
The Johnson Pump CM30P7 12V circulator combines the durability and ease of use of a magnetically coupled design. The magnetic coupling eliminates mechanical wear, providing a significantly longer service life compared to traditional designs. This innovative design also ensures that the pump operates reliably even in demanding conditions without loss of performance. The pump's compact size (length 177 mm and width 62 mm) makes it well suited for
for a wide range of installation and operating environments. The bearing-mounted permanent magnet motor ensures smooth operation and minimizes the need for maintenance. Durable materials and high-quality finish make this pump an excellent choice as a circulation pump for boats, motorhomes or other mobile applications. The CM30P7 offers a maximum flow rate of 26 liters per minute combined with 20 mm connections, making it a high-performance option for medium and small water circuits. Its versatile design and technical features make it a safe choice for any situation.
Continuous use and long 5000 hour lifespan
The CM30P7 is designed for continuous use and long-term durability. Its rated life is
as much as 5,000 hours, which means reliable and long-lasting performance for years to come.
This makes the pump an ideal choice for both professional and hobby use where a high level of
continuous circulating water and maintenance-free operation.
Continuous rotation during use supports balanced water circulation and prevents, for example,
overheating or pressure fluctuations. Excellent performance and reliability combined
low energy consumption, as the pump's 12-volt operating voltage enables it to operate efficiently
use as part of energy-saving systems.
With its long service life and design designed for continuous operation, the CM30P7 saves
costs and time, as the pump does not need to be replaced or serviced as often as many
other similar models on the market. This makes it an attractive option also
for users who value environmental friendliness.
Installation options: inlet or pre-fill
The CM30P7 offers users two installation options: it can be installed either in the input
with or by pre-filling. Both options ensure smooth operation and adapt to
This flexibility makes the pump easy to integrate into existing
systems effortlessly and quickly.
In a backflow installation, the pump utilizes the system's own water pressure for pumping.
This is often the recommended and simplest solution, especially in systems that
where the water supply pressure is ready. Pre-filling allows the pump to operate
self-priming, which is especially convenient in situations where water supply pressure is not available.
Whatever the chosen mounting method, the CM30P7's technical connections (20 mm) and compact
design makes implementation easier. This saves time and ensures that the system can be
quickly deploy without additional installation challenges.
Dry operation for up to 30 minutes without damage
One of the unique features of the CM30P7 is its ability to withstand dry operation for up to 30
for one minute without damage. This is especially important in applications where water supply is
may occasionally fail or in situations where the system is tested without fluids.
Compared to traditional pump designs, this feature increases operational reliability and
flexibility. The user does not have to worry about the pump being damaged in the event of an accidental
in dry operating situations, which reduces maintenance costs and the risk of failures.
Dry running durability makes the CM30P7 a safe choice for long-term use where
Any downtime will not affect the pump's performance. This innovation
reflects the pump's high quality and design principles, where reliability and functionality are paramount
are prioritized.
Frequently Asked Questions Johnson Pump CM30P7
-model
? Can the CM30P7 pump be used for salt water?
Yes, the pump is suitable for a wide range of liquids, including salt water, as long as it
rinse thoroughly after use.
? How much electricity does the pump consume?
The pump's 12V system is energy efficient and ideal for battery-powered applications.
systems such as boats and motorhomes. Consumption depends on the exact operating load
and conditions.
? Is the pump easy to maintain or repair?
The pump's magnetically coupled design is designed to reduce the need for maintenance.
Any maintenance procedures, such as checking seals, are straightforward and
user-friendly.
- Magnetically coupled pump
- Available in three different sizes
- 12V
- Connectors 20mm
- 26L/min
- Length 177mm
- Width 62mm
Kampanja
Johnson Pump macerator pump 12V
Technical features of the Johnson Pump macerator pump
The Johnson Pump 12V Macerator Pump (model TA3P10-19) is designed to provide a high-performance and reliable solution for handling toilet waste on boats and in other confined spaces. The device is powered by a 12V DC system, which is equipped with a built-in thermal protector to prevent overheating. The pump body is made of phenolic plastic (PF), which ensures durability and longevity even in demanding operating conditions. The functional parts of the pump are optimized to withstand demanding use. The impeller is made of nitrile (09-1052S-9), which enables high-efficiency pumping. The shaft is made of stainless steel, and the pump housing is made of thermoplastic polyester (PET) for durability. The combination of these materials ensures the reliability and functionality of the pumping mechanism. The technical features are complemented by an adjustable hose connection: the suction hose is attached with either an 11?2” (Ø38 mm) hose or an 11?2” BSP connection, and a 1” (25.4 mm) hose is used for the discharge pipe. The pump output is 37 liters per minute (at 0.2 bar pressure). Safety of use is ensured by a current consumption of 15 amps and a 20 amp fuse.
Intended use and installation recommendations
The Johnson Pump 12V Macerator Pump is designed specifically for waste management in boat toilet systems. It is suitable for handling waste flows from both septic tanks and toilet bowls, and its shredding feature makes it ideal for reducing difficult-to-pump masses. The pump is an excellent solution for confined spaces where reliable and efficient waste management is required. For installation, it is recommended to place the crusher pump as close as possible to either the septic tank or toilet bowl. This minimizes pressure losses caused by the length of the hoses and ensures the pump operates efficiently. Careful installation also helps prevent leaks and other operating problems. It is important to follow the device's instructions during installation. Always use unbleached toilet paper to keep the pump mechanism in working order. During installation, care must be taken to ensure that the pump is not used dry, as this can damage both the impeller and the motor.
How does a slurry pump handle toilet waste?
The Johnson Pump macerator pump uses a rotating cutting blade to reduce solid waste into a fine stream. The speed and force of the cutting blade effectively breaks down fibrous materials and even difficult-to-pump impurities. This reduction process ensures that the waste material does not clog the hoses or septic tank. Once the waste has been reduced to a fine enough size, the pump moves the material forward using an impeller. The impeller design allows for a smooth and rapid flow, allowing the pumped material to move smoothly along the discharge pipes. This ensures functionality even in long hose lines. The shredder function and impeller combination make the Johnson Pump shredder pump particularly reliable when handling the demands of boat sanitation systems. The pump technology is designed to minimize malfunctions due to misuse, such as blockages or engine overloads.
Frequently Asked Questions (FAQ) about the crushing pump
- Can the slurry pump be used in applications other than marine toilet systems? Yes, the pump is also suitable for other applications where solid waste needs to be reduced and pumped. Please note the specific features and operating limitations of the device when planning the installation.
- What materials should not be pumped through the device? Bleached toilet paper, solvents, oils, or large foreign objects that could clog the mechanism should not be pumped through the device. Use only unbleached toilet paper for a suitable septic system.
- How can I prevent the pump from clogging during use? Make sure to use only materials recommended in the device's operating instructions and perform regular maintenance. Also, keep the hose paths clean and do not run the pump dry.
Maintenance instructions and usage restrictions
The crusher pump must be serviced regularly to ensure its functionality and longevity. Regularly check the condition of the pump’s cutting blades and ensure that they are free from blockages. In addition, the impeller must be checked for wear periodically and replaced if necessary. Following the maintenance schedule will significantly reduce problems caused by waste flow. The pump motor can be maintained in good working order by carefully cleaning the electrical contacts and motor section of the unit. The thermal protector prevents the motor from overheating, but the user should still avoid running the pump for long periods of time under heavy use. The fuse (20 A) must be replaced if it breaks due to overloading. The operating restrictions include the absolute requirement that the pump must never be run dry. A sufficient amount of wastewater lubricates and protects the moving parts of the equipment. Keep the pump away from chemicals or harmful liquids that can damage seals and materials, and only use it for the recommended waste streams.
- Motor: 12V DC (built-in thermal protection)
- Body: Phenolic plastic (PF)
- Impeller: Nitrile 09-1052S-9
- Pump housing: Thermoplastic Polyester (PET)
- Shaft: Stainless steel
- Seal: Lip seal
- Flow rate 0.2 bar (6.7 ft): 37 l/min – 10 GPM
- Suction hose connection: 1½" (Ø38 mm) hose, or 1½" BSP
- Amps: 15 A
- Fuse: 20 A
- Drain hose connection: 1" (25.4 mm) hose
Kampanja
Self-priming impeller pump (up to 3m height) with bronze housing and spark-proof motor. Typical applications include bilge, diesel fuel transport, flushing pump, fresh water pump and much more. Oil-resistant nitrile impeller. Shaft made of acid-resistant steel. Includes connectors, quick-release couplings.
- Flow: 21l/min
- 12 volts
- Self-priming impeller pump
- Connector: 3/8"
- Length: 170 mm
- Width: 113 mm
- Height: 82
- Oil change kit
- Hose connectors: 6 & 8mm
- Hose length: 240cm (120+120cm)
Kampanja
Modern 12 V self-priming single-chamber diaphragm pumps for a wide range of applications, including bilge and drain pumps. Advantages of the diaphragm pump: quiet operation, dry running capability, easy installation, no filter required, easy maintenance, low power consumption, can be installed at different angles. Removable connectors included.
- Length: 186mm
- Width: 181mm
- Height: 118mm
- Flow: 16L/min
- Connectors: 19/25mm
- 12V
- Easy to maintain
JUNE DEAL
The Viking Power 32 is a 12V drain pump that can be used for draining and emptying. The drain pump has several advantages. It is silent in operation and can also run dry without damage. Installation is easy and no filter is required. The pump is easy to maintain and consumes little power. In addition, the motor can be installed at different angles, which increases the installation possibilities. The package also includes snap-off connections, which make installation even more convenient.
Size LxWxH: Viking Power 32277x264x192
Maximum suction height 3m.
Size LxWxH: Viking Power 32277x264x192
Maximum suction height 3m.
- Maximum flow: 32 l/min
- 12 volts
- Easy to install
Kampanja
Outlet
Diaphragm pump that can be used as a bilge pump or sewage pump. Compact design. Flexible installation. Perfect for installation in tight spaces. Pump motor can be rotated 360 degrees. Can withstand dry running. No filter required. Can pump air and water mixture. Low power consumption. Quiet running. Double shut-off valve.
- Capacity at 1.5 m height: 19 lit./min
- Dimensions: 355x195x125mm
- 12V
- Hose connectors: 38mm
- 6A
- Flow: 32l/min
Kampanja
Complete deck wash pump with pressure control system. The pressure switch is electronic on DP9E and DP12E, DP3 has a mechanical pressure switch. The pump is a self-priming gear pump with Teflon gears and a bronze pump housing. The deck wash kit can be used in both fresh and salt water systems. The kit includes a 10 meter long, stretchable, flexible spiral hose with quick coupling and a flushing nozzle.
- Mechanical pressure switch
- Pump capacity: 12 l/min
- Motor power: 180W
- Voltage: 12V/24V
- Pressure: 4 bar
- Recommended fuse size: 15 A
- Suitable hose diameter: 13 mm
- Connectors: BSP 3/8'
- Weight: 4.84 kg
- DP3, 12 V/10A, 14 l/min 2 bar, mechanical pressure switch.
Marco UP1-J 28L/min impeller pump 12V
Product specifications and performance
The Marco UP1-J is a high-performance self-priming vane pump designed to meet the demanding conditions of boating. The pump has a flow rate of up to 28 liters per minute, ensuring efficient fluid transfer in a variety of applications. The motor power is 150 watts, providing smooth and reliable operation. The pump operates at 12 V and draws 8 A. The recommended fuse size is 10 A, ensuring reliable protection against potential power surges. The pressure capacity is 1 bar, which is suitable for most pumping needs, and the built-in EMI suppressor ensures smooth electrical operation without interference. The self-priming design allows fluid transfer from depths of up to 1.5 meters without separate manual filling. The pump's connections are compatible with 20 mm hoses and have 3/8” BSP threads, ensuring easy and stable connection. The compact 1.8 kg weight makes the pump easy to install and handle.
Applications: bilge and greywater pumping
The Marco UP1-J is specifically designed for bilge and grey water pumping on all types of vessels. It is ideal for draining boat bilges and efficiently pumping grey water such as wash and shower water. The impeller mechanism ensures a steady flow even in challenging conditions. The pump’s performance makes it an ideal solution for small and medium-sized boats. Its self-priming function minimizes manual work involved in operation, which improves usability, especially in situations where quick water removal is required. In addition, the pump’s compact size allows it to be installed even in tight spaces, such as boat bilges. The Marco UP1-J is resistant to a wide range of liquids and both fresh and salt water. The high construction standard and quality of components ensure that the pump can withstand continuous use without worrying about wear or malfunctions. This makes it an excellent choice for mariners who need a reliable pump in demanding conditions.
Safety standards: ISO 8846 and ISO 8849
The Marco UP1-J meets both ISO 8846 and ISO 8849 safety standards, which are certifications specifically used in the marine industry. The ISO 8846 standard means that the pump is resistant to explosion risks caused by flammable gases and liquids. This is especially important when the pump is installed in boats with engine compartments where starting gases may be present. The ISO 8849 standard defines the functional requirements for bilge and greywater pumps. Meeting the standard means that the Marco UP1-J offers reliable and safe performance and efficiency for all applications. This makes the pump an excellent choice for boat owners who want a worry-free and safe solution. Meeting the safety standards also ensures that the pump is compliant with regulations in different countries, making it an internationally approved product. This increases the reliability and value of the Marco UP1 J for boat owners who value safety and compliance with local regulations. Installation features and waterproof design The Marco UP1-J is designed to be watertight in all conditions. An integrated waterproof lead-through for the electrical cables prevents moisture and water from entering the motor compartment. This extends the pump’s service life and ensures safe operation even in harsh marine conditions. With its compact 1.8 kg weight and intuitive connections, the Marco UP1-J is easy to install and adapt to existing systems. 20 mm hose connections and 3/8” BSP threads make integration into various applications effortless. The pump’s self-priming feature reduces installation time and saves the user from unnecessary work. In addition to being waterproof, the Marco UP1-J’s mechanical design is designed to minimize maintenance requirements. All key components are manufactured to withstand corrosion and environmental factors such as salt water and humidity. This ensures that the pump provides long-lasting and reliable performance, even under intensive use.
Frequently Asked Questions (FAQ) about the Marco UP1-J pump
- Is the Marco UP1-J intended for pumping salt water? Yes, the pump is suitable for pumping both fresh and salt water.
- How deep can the pump lift water when self-priming? The pump can lift water when self-priming from a depth of 1.5 meters.
- Does the pump have protection against electrical interference? Yes, the built-in EMI suppressor protects the pump against electrical interference. What kind of power supply does the pump need? The Marco UP1-J uses a 12 V power supply.
- What size hose fits the pump? The pump's connections are compatible with 20 mm hoses.
- Does the pump come with an installation kit? No, any installation accessories and accessories must be purchased separately.
- Voltage: 12V
- Consumption: 8 A
- Fuse: 10 A
- Self-inflating: 1.5 m
- Pressure: 1 bar
- Flow rate: 28 l/min
- Hose: 20 mm
- Connections: 3/8” BSP
- Motor power: 150 W
- Weight: 1.8 kg
Kampanja
Marco UP2/E gear pump
Overview and key features
Product Overview and Key Features The Marco UP2/E gear pump is a high-quality, electric water pump designed specifically for applications that demand stability and performance. Its key features include a 10-liter-per-minute capacity, multi-voltage operation (12V/24V) and intelligent electronic control based on pressure sensing. This product combines impeccable technical execution with a compact, user-friendly design. The pump offers a maximum pressure of 2 bar and is equipped with 3/8” BSP connections, making it easy to integrate into most systems. For hose compatibility, the pump is suitable for use with 12 mm hoses. The motor power (90 W) and compact size make it a powerful yet space-saving solution for a variety of environments. The Marco UP2/E is designed to last and operate reliably even in demanding conditions. Its precise flow rate and consistent performance make it an ideal solution for the marine industry, recreational vehicles and other applications where water supply is key.
Electronic pressure control: efficiency and precision
The Marco UP2/E’s electronic pressure control system ensures energy-efficient operation and precise control of water consumption. The pump automatically adapts the motor speed to the water demand, enabling optimal energy consumption while saving battery or electric power. The system eliminates the need for additional components such as pressure vessels, as it can independently adjust its operation to the required pressure and flow conditions. This not only simplifies the system, but also reduces the need for maintenance and the number of potential points of failure.
The pressure control system is particularly suitable for applications where water distribution must be precise and consistent, such as showers, faucets or small-scale sprinkler systems. Such precision ensures both user-friendliness and optimal utilization of resources.
Self-priming design and multi-voltage system support
The self-priming design of the Marco UP2/E pump makes it an excellent choice for systems where the water source is located below the pump. The self-priming mechanism allows for fast and reliable water delivery without additional priming or start-up requirements. This feature brings flexibility and versatility to the pump installation. Another significant advantage is the pump’s multi-voltage support, which allows the user to choose between a 12V or 24V electrical system. This makes the pump extremely versatile, as it can be connected to a variety of power sources for both land and water use, for example in boats or RVs. By combining the self-priming design and multi-voltage functionality, the Marco UP2/E establishes
It has established itself as a device that is suitable for almost any water distribution environment, designed to provide consistent and reliable performance regardless of the power source or application.
Safety features: short-circuit and overload protection
The Marco UP2/E pump is equipped with built-in short-circuit and overload protection, which improves the overall safety of the product and extends its service life. This feature eliminates the need for separate fuses or protection systems, which reduces installation and maintenance costs. Short-circuit protection prevents damage to the electrical circuit or the occurrence of dangerous situations, making the pump safe to use even in challenging environments. Reliable safety systems ensure that the pump can handle current and pressure peaks without interference or interruptions. Overload protection protects the motor from excessive strain, allowing continuous operation even under high loads. This feature makes the Marco UP2/E long-lasting
an investment that can withstand demanding use without worrying about sudden breakages or
overload problems.
Frequently Asked Questions (FAQ) about the Marco UP2/E pump
- What voltage options does the pump have? The Marco UP2/E supports both 12V and 24V voltages, making it compatible with a variety of electrical systems.
- Is it safe to use the pump without separate protective devices? Yes, the pump has built-in short-circuit and overload protection, so no separate fuses are needed.
- Is the pump self-priming? Yes, the Marco UP2/E is self-priming, which means that it can move water even when the water source is below the pump without separate priming.
- Are pipe sizes other than 12 mm suitable for the pump? The pump is specifically designed for 12 mm hoses, but the BSP 3/8' standard of the connectors allows the use of adapters.
- Does the pump need a pressure vessel to operate? No, the electronic pressure control makes a pressure vessel unnecessary, which simplifies the system and saves space.
- Pump capacity: 10 l/min
- Motor power: 90W
- Voltage: 12V/24V
- Pressure: 2 bar
- Recommended fuse size: 7.5 A
- Suitable hose diameter: 12 mm
- Connectors: BSP 3/8'
Marco UP3 electric pump
Marco UP3 electric pump uses and features
Marco UP3 is a versatile and reliable electric gear pump designed for pumping a variety of liquids. The pump is particularly suitable for handling drinking water, diesel fuels, light lubricating oils and anti-icing agents, so its applications range from boating, vehicle fleet to industrial applications. The pump's self-priming function allows it to lift liquids up to 1.5 meters, making it
ideal for demanding installation locations. The pump structure is designed to withstand use and environmental requirements. The pump's bronze parts ensure a long service life and reliability, while the built-in mechanical pressure switch improves the automatic control and safety of the device. User-friendliness has also been taken into account in that the UP3 is compact, lightweight and easy to install in small spaces. An important safety point is that the Marco UP3 is only intended for handling safe, non-explosive liquids. Therefore, the pump must not be used for pumping gasoline, for example. This precaution ensures safe operation and a long service life of the device.
Technical specifications: 12V and 24V models compared
The Marco UP3 is available in two different models, differentiated by operating voltage and power consumption. Both models offer the same capacity, i.e. pumping up to 15 liters of liquid per minute, but their technical details are optimized for different power sources. The 12V model is particularly popular as it is optimized for the energy needs of small boats and cars. This model consumes 6A of current and requires a 10A fuse. It weighs 3.1 kg, which makes it suitable for installation in heavier vehicles. The 24V model, on the other hand, effectively meets the needs of high-voltage environments, such as larger ships or vehicles using a 24V electrical system. This model consumes less current, only 3A, and requires a 5A fuse. It is also significantly lighter, weighing only 1.3 kg, which improves mobility and quick installation. Both models use similar connectors (BSP 3/8") and require the same diameter hose (13 mm), making it easier to obtain spare parts and accessories.
Installation instructions and safety regulations in use
Installing the Marco UP3 electric pump is easy, but for safety and optimal operation, the installation instructions must be followed carefully. First, make sure that the pump is installed on a horizontal and stable surface that reduces vibration and ensures smooth operation. The connections and hoses must be attached carefully to avoid leaks and ensure optimal flow.
When connecting the pump, make sure to use the correct voltage version. 12V and 24V models should not be connected to the wrong power source, as this can cause an overload and impair the operation of the pump's electrical components. Always check the size of the fuse used in the pump system (10A or 5A depending on the model) to protect against damage to the device. Incompatible liquids such as gasoline or other explosive compounds should be avoided. Also, make sure that the pump is not run dry, as this can damage its internal components.
Frequently Asked Questions (FAQ) about the Marco UP3 electric pump
- Can the Marco UP3 pump be used to pump salt water? Yes, but we recommend rinsing the pump with clean water after use to avoid corrosion or deposits on the pump components.
- Is this pump self-priming? Yes, the Marco UP3 is a self-priming pump that can lift liquid from a height of up to 1.5 meters through the suction pipe.
- What to do if the pump does not start? Check the power supply, fuse and electrical connections. Also make sure that the pump inlet is not blocked and that the pump is not running dry.
Service, maintenance and spare parts: pump longevity
To ensure the longevity of your Marco UP3 electric pump, regular maintenance and proper use are essential. It is a good idea to check the internal parts of the pump at least once a year for possible wear, blockages or signs of corrosion. Protecting the bronze components is especially important if the pump has been used in aggressive environments, such as salt water. The pump should always be rinsed thoroughly after use, especially if it has been moved.
fluids such as anti-freeze. This prevents deposits and ensures the proper functioning of the pump's internal components. In addition, regular inspection of the pump seals and hose connections helps to avoid leaks.
However, if any part of the device wears out over time, Marco offers a comprehensive range of spare parts, including internal seals, gears and connectors. We recommend using only original spare parts to ensure the performance of the device.
Kampanja
UP3/E 12/24V Electronic water pressure system 15 l./min.
Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.
Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.
UP3/E 12/24V Electronic water pressure system 15 l./min.
Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.
Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers. Available also with control panel.
