Tuoteryhmät
Johnson Pump CM10P7 Circulation Pump 12V, 20mm
-6%
- Pump body: PPA, Thermoplastic
- Impeller: PPA, Thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC protection IP67 permanent magnet, ball bearing motor, designed for continuous use
- Fluid: Water/glycol mixture max. 60% glycol, fresh water
- Liquid temperature: Min -40°C, Max +100°C
- System pressure: 2.5 bar max
- Hose connections: Ø 20mm (3/4")
- Dry use: Max. 30 minutes
- Input power: Max 14W
- Installation: separate universal mounting foot for flat surfaces
- Output: 18.5l/min - 0.1 bar
Johnson Pump CM10P7 circulation pump 12V
Magnetic drive design and low power consumption
The Johnson Pump CM10P7’s magnetic drive design ensures long life and reliable operation by minimizing mechanical wear. This innovative design improves pump performance and ensures that the pump runs smoothly even over longer duty cycles. The magnetic drive design means fewer moving parts are required, reducing maintenance and increasing user comfort.
The pump has been designed with special attention to low power consumption, making it an ideal choice for energy-efficient systems. The maximum power input is only 14 watts, which allows for long operating times without significant energy consumption. This feature makes the pump particularly suitable for situations where continuous or long-term operation is required.
The IP67 rating ensures the pump is suitable for demanding conditions, as the design is dust and water resistant. The device is also equipped with a ball-bearing permanent magnet motor, which provides excellent power and reliability in both heating and cooling systems.
High fluid flow for heating and
for cooling systems
With a high maximum flow of 18.5 litres (0.1 bar), the Johnson Pump CM10P7 provides efficient fluid circulation in both heating and cooling systems. This makes the pump an excellent choice for a wide range of applications where temperature balancing and optimisation of heat transfer are key. The pump is also suitable for circulating fresh water or water-glycol mixtures, which increases its versatility. The pump has an impressive operating temperature range, operating reliably at minimum temperatures of -40°C and liquid temperatures of up to +100°C. This wide temperature range makes the pump perfect for use in harsh climates and complex cooling and heating systems. The CM10P7 can withstand system pressures up to a maximum of 2.5 bar, making it suitable for both domestic and commercial installations. Whether heating in a dishwasher or optimising cooling in a vehicle system, this pump delivers stable and efficient performance.
Technical specifications: Johnson Pump CM10P7 12V circulation pump
- Body material: PPA-resistant plastic
- Impeller: PPA thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC, ball bearing, IP67 rated, permanent magnet motor
- Operating fluid: Water/glycol mixture (max. 60% glycol) or fresh water
- Liquid temperature: Minimum -40 °C, maximum +100 °C
- System pressure: Maximum 2.5 bar
- Hose connections: Diameter Ø 20 mm (3/4")
- Dry use: Allowed for a maximum of 30 minutes
- Input power: Maximum 14 W
- Output: 18.5 liters/minute (0.1 bar)
- Installation: Universal mounting foot for flat surface
Installation instructions and compatibility with different systems
The Johnson Pump CM10P7 is designed to be user-friendly to install, with the included universal mounting foot suitable for mounting on almost any flat surface. This makes the pump very flexible in a variety of system configurations. It is important to position the pump so that the liquid flows freely and avoid angles that could cause flow disturbances.
The hose connection (Ø 20 mm, 3/4”) allows compatibility with most standard pipework. Furthermore, the pump is designed to operate efficiently in both small domestic environments and large industrial systems. It is important to choose the right operating system for the pump’s characteristics, such as water temperature and pressure ranges. Dry running of the pump is only permitted for short periods (up to 30 minutes), but this possibility can facilitate the installation and testing phase. Remember to check that the pump liquid is of the correct type – water or a water-glycol mixture with a glycol content of up to 60% will ensure the best performance and longevity of the pump.
Frequently Asked Questions (FAQ) about Johnson Pump CM10P7
- Can the pump be used in winter conditions? Yes, the pump is designed to operate in minimum temperatures of -40°C, making it ideal for cold environments.
- Is the pump durable in continuous use? Absolutely. The IP67-rated motor and ball bearing construction ensure the pump's durability even in continuous use.
- Can I use water and glycol mixture in the pump? Yes, the pump is compatible with water/glycol mixture, but the glycol concentration should not exceed 60%.
- How to mount the pump? The pump is mounted using the included universal mounting foot, which is designed for mounting on flat surfaces.
- How long does the pump last? The exact lifespan of the pump cannot be determined, but its durable construction, low power consumption and low wear and tear guarantee a long service life if properly maintained.
Tuotenr: 8902
Valmistajan tuotenr: 10-24502-03
Kampanjahinta
199,00 €211,00 €/
Yhteensä sis. alv 25.5%
Helsinki LauttasaariAvailablehyllypaikka: 19
Vantaa PorttipuistoAvailablehyllypaikka: 21
VerkkokauppaAvailabledelivery time 1 - 3 working days
Toimituksen hinta: 5,90 €Matkahuolto's Near Parcel
- Pump body: PPA, Thermoplastic
- Impeller: PPA, Thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC protection IP67 permanent magnet, ball bearing motor, designed for continuous use
- Fluid: Water/glycol mixture max. 60% glycol, fresh water
- Liquid temperature: Min -40°C, Max +100°C
- System pressure: 2.5 bar max
- Hose connections: Ø 20mm (3/4")
- Dry use: Max. 30 minutes
- Input power: Max 14W
- Installation: separate universal mounting foot for flat surfaces
- Output: 18.5l/min - 0.1 bar
Johnson Pump CM10P7 circulation pump 12V
Magnetic drive design and low power consumption
The Johnson Pump CM10P7’s magnetic drive design ensures long life and reliable operation by minimizing mechanical wear. This innovative design improves pump performance and ensures that the pump runs smoothly even over longer duty cycles. The magnetic drive design means fewer moving parts are required, reducing maintenance and increasing user comfort.
The pump has been designed with special attention to low power consumption, making it an ideal choice for energy-efficient systems. The maximum power input is only 14 watts, which allows for long operating times without significant energy consumption. This feature makes the pump particularly suitable for situations where continuous or long-term operation is required.
The IP67 rating ensures the pump is suitable for demanding conditions, as the design is dust and water resistant. The device is also equipped with a ball-bearing permanent magnet motor, which provides excellent power and reliability in both heating and cooling systems.
High fluid flow for heating and
for cooling systems
With a high maximum flow of 18.5 litres (0.1 bar), the Johnson Pump CM10P7 provides efficient fluid circulation in both heating and cooling systems. This makes the pump an excellent choice for a wide range of applications where temperature balancing and optimisation of heat transfer are key. The pump is also suitable for circulating fresh water or water-glycol mixtures, which increases its versatility. The pump has an impressive operating temperature range, operating reliably at minimum temperatures of -40°C and liquid temperatures of up to +100°C. This wide temperature range makes the pump perfect for use in harsh climates and complex cooling and heating systems. The CM10P7 can withstand system pressures up to a maximum of 2.5 bar, making it suitable for both domestic and commercial installations. Whether heating in a dishwasher or optimising cooling in a vehicle system, this pump delivers stable and efficient performance.
Technical specifications: Johnson Pump CM10P7 12V circulation pump
- Body material: PPA-resistant plastic
- Impeller: PPA thermoplastic
- Shaft: Stainless steel
- Motor: 12V DC, ball bearing, IP67 rated, permanent magnet motor
- Operating fluid: Water/glycol mixture (max. 60% glycol) or fresh water
- Liquid temperature: Minimum -40 °C, maximum +100 °C
- System pressure: Maximum 2.5 bar
- Hose connections: Diameter Ø 20 mm (3/4")
- Dry use: Allowed for a maximum of 30 minutes
- Input power: Maximum 14 W
- Output: 18.5 liters/minute (0.1 bar)
- Installation: Universal mounting foot for flat surface
Installation instructions and compatibility with different systems
The Johnson Pump CM10P7 is designed to be user-friendly to install, with the included universal mounting foot suitable for mounting on almost any flat surface. This makes the pump very flexible in a variety of system configurations. It is important to position the pump so that the liquid flows freely and avoid angles that could cause flow disturbances.
The hose connection (Ø 20 mm, 3/4”) allows compatibility with most standard pipework. Furthermore, the pump is designed to operate efficiently in both small domestic environments and large industrial systems. It is important to choose the right operating system for the pump’s characteristics, such as water temperature and pressure ranges. Dry running of the pump is only permitted for short periods (up to 30 minutes), but this possibility can facilitate the installation and testing phase. Remember to check that the pump liquid is of the correct type – water or a water-glycol mixture with a glycol content of up to 60% will ensure the best performance and longevity of the pump.
Frequently Asked Questions (FAQ) about Johnson Pump CM10P7
- Can the pump be used in winter conditions? Yes, the pump is designed to operate in minimum temperatures of -40°C, making it ideal for cold environments.
- Is the pump durable in continuous use? Absolutely. The IP67-rated motor and ball bearing construction ensure the pump's durability even in continuous use.
- Can I use water and glycol mixture in the pump? Yes, the pump is compatible with water/glycol mixture, but the glycol concentration should not exceed 60%.
- How to mount the pump? The pump is mounted using the included universal mounting foot, which is designed for mounting on flat surfaces.
- How long does the pump last? The exact lifespan of the pump cannot be determined, but its durable construction, low power consumption and low wear and tear guarantee a long service life if properly maintained.
Tuotenr: 8902
Valmistajan tuotenr: 10-24502-03
Katso muut tuotemerkin tuotteet
Suosittelemme sinulle
Maksutavat
