Showers
Showers for boats and RVs.Showers -ryhmän tuotteet
- Without connectors
- Length: 1.3m
- Flexible shower hose
- Length: 1.5 meters
- 1/2 inch female connection
White 125 mm shower handle made of ABS plastic, equipped with on/off flow function.
- Length: 125mm
- Plastic handle
- On/off flow function
- Connection: 1/2"
- Length: 125mm
- Shower head: Ø 30 mm
- Color: White
- Length: 125 mm
- Chromed plastic handles
- Shower on and off button
Single lever mixer with shower head and 150cm hose. The tap is opened by pressing down and closed by lifting up. Brass hose connectors for 12mm hose. Inlet water connector 3/8 inch. Hole size: 32mm. Height from worktop: 140mm.
- Single-lever water mixer
- Pull-out shower head
- 150 cm hose
The Sanimarin pump, essential for installing a shower or washbasin, ensures the recovery of the ship's wastewater. Installation can be done either above or below sea level thanks to a vertical outlet of up to 4 meters and an outlet diameter of 22 - 32 mm. The robust pump lifts wastewater at a maximum temperature of 35 °C and a flow of approximately 70 l/min (12 V).
- Requires very little floor space
- Low release height
- 2 low side entrances
- Quiet operation, 46 dB(A)
- Odorless, built-in activated carbon filter
- Fewer body valves
A mixer tap suitable for small spaces with an easy-to-use loop tap. The tap body is made of chrome-plated brass. A pull-out shower head with its own shut-off switch.
- Thread: R 3/8"
- Shower hose length: 2 meters
- 3m hose
- Shower head
- Coupling
• Equipped with a thumb grip handle
• Hose: 2.4m
• Width: 117mm
• Depth with hose connection: 180mm
• Hose length: 3m
• Submersible
• Faucet: chrome
Shower handle, common to many boat manufacturers. Diameter 1/2 inch, external thread.
- White plastic
- 1/2 inch external thread
- Shower head for deck shower
A shower head that is common among many boat manufacturers.
Round and recessed shower mixer with covers and for hot and cold water connections. Turn the tap to the desired water flow. Push the tap to the right or left to adjust the correct temperature.
Outer dimension: 95mm
Hole size: 70mm
3/8" thread for hoses
Supplied without hose connectors
- Hot and cold water
- Recessed shower mixer
- Mounting hole size 70mm
- Length 15cm
- Plastic handle
- On/off flow
Whale shower nozzle, made of natural white ABS plastic. Durable and rust-proof. Hose not included.
The product is available in different packages:
- Complete shower set without cover
- Complete shower set with lid
- Shower head as a spare part
- Shower hose length: 2.1 meters
- Case width: 167 mm, with lid hinges 180 mm and lid open to the side 350 mm
- Case height: 292 mm
- Case lid width: 183 mm
- Housing cover height: 298 mm
- Immersion depth: 68 mm
Base plate dimensions: 167x292mm
Immersion depth: 88mm
Connections: 1/2" thread
- For hot and cold water
- Easy installation
- Made of ABS plastic
mounting hole diameter: 80mm
immersion depth: 130mm
connections: 3/8 adapter / 1/2' female thread
weight: 0.53kg
• Easy installation
• 108mm
