Underwater Lights

Attwood's LightArmor underwater light is compact and powerful. The light has 3 blue LEDs that produce 800 lumens. The light is equipped with a cooling system, active overheating protection system and impact-resistant glass. The electronics are waterproof, UV-resistant and resistant to chemicals and corrosion. LED quantity: 3, Color: Blue, Luminous flux: 800 lumens, Voltage: 12V, Length: 102mm, Width: 54.5mm, Height: 14mm

The Hella Marine Apelo A1 provides stunning illumination with up to 1800 lumens of RGB light. Apelo's optical intelligence effectively focuses the light patterns below the water's surface. The narrow vertical and wide horizontal angles make the light brighter when viewed from above. The robust and UV-resistant Grilamid lens provides exceptional transparency and durability. Apelo underwater lights are designed and manufactured in New Zealand and meet international standards for durability and finish. The Apelo A1, which is mounted on a hull, has a very strong, corrosion-resistant thermopolymer housing that is compatible with all hull materials. Advanced electronics ensure reliable lighting and lamp protection even in strong voltage fluctuations and low battery voltages. Apelo lights are designed to prevent possible interference with radios, chartplotters and other equipment and are covered by a 5-year warranty. TECHNICAL

Apelo underwater lights are designed and manufactured in New Zealand and meet international standards for durability and finish. The Apelo A1 frame-mounted light features a very strong, corrosion-resistant thermopolymer housing that is compatible with all frame materials.

Advanced electronics ensure reliable lighting and lamp protection even in the event of strong voltage fluctuations and low battery voltages. Apelo lamps are designed to prevent possible interference with radios, chartplotters and other devices, and come with a 5-year warranty.

SPECIFICATIONS:
Lumen: 1800 (white)
Color temperature: 5000K (white)
Lens material: Premium UV-stable, impact-resistant nylon (grilamid)
Housing material: Corrosion-resistant thermal polymer
Cable: 2.5 m / 8.2 ft 5-core tinned marine cable
Operating voltage: Multi-voltage 9-32V DC, 12/24V DC nominal
Voltage protection: Surge protected to +500 volts, reverse polarity protected to -700 volts
Power consumption: 15W / 1.25A @ 12V DC, 0.7A @ 24V DC
Protection class: IP68 / IP69: Can be immersed and cleaned with a high-pressure water jet
Installation: Transom/surface mount with durable mounting system
Approvals: EN55015/ CISPR 15, IEC60533, IEC61547, ICES-5

Apelo underwater lights are designed and manufactured in New Zealand and meet international standards for durability and finish. The Apelo A1 frame-mounted light features a very strong, corrosion-resistant thermopolymer housing that is compatible with all frame materials.

Advanced electronics ensure reliable lighting and lamp protection even in the event of strong voltage fluctuations and low battery voltages. Apelo lamps are designed to prevent possible interference with radios, chartplotters and other devices, and come with a 5-year warranty.

SPECIFICATIONS:
Lumen: 1800 (white)
Color temperature: 5000K (white)
Lens material: Premium UV-stable, impact-resistant nylon (grilamid)
Housing material: Corrosion-resistant thermal polymer
Cable: 2.5 m / 8.2 ft 5-core tinned marine cable
Operating voltage: Multi-voltage 9-32V DC, 12/24V DC nominal
Voltage protection: Surge protected to +500 volts, reverse polarity protected to -700 volts
Power consumption: 15W / 1.25A @ 12V DC, 0.7A @ 24V DC
Protection class: IP68 / IP69: Can be immersed and cleaned with a high-pressure water jet
Installation: Transom/surface mount with durable mounting system
Approvals: EN55015/ CISPR 15, IEC60533, IEC61547, ICES-5

Light up your boat in all colors underwater with Aries RGBW underwater lighting!

With this impressive RGBW underwater lighting, you can always present your boat in the right light, the way you want.
Aries is suitable for both transom and side mounting on boats of all types and lengths, so you can illuminate the surrounding water the way you want.
Underwater lighting can also be installed on a dock, swimming pool, and hot tub to enhance the ambiance.
Light up your boat with RGBW and 16 million colors!
RGBW not only lets you freely choose between the primary colors red, green, and blue, but now also fine-tune white light and mix it with the primary colors to create richer, brighter, and more vibrant colors.
Aries underwater lighting requires the Capricorn RGBW dimmer (art. 69683) for RGBW to work (see accessories).
The Capricorn LED dimmer is connected between the battery and the lamps and then controlled using the Tuya app or the Capricorn remote control (product 69684).
With the Tuya app, you can turn the light on and off, adjust the brightness, color temperature, choose any RGBW color, and even synchronize the lighting with music.

With its 2000 lumens, you can even illuminate murky water and still produce a great light.
This way, nature can't stop you and your boat from expressing your emotions with the brilliant colors of Aries.
Illuminate with blue, which works best in all waters because its short wavelengths break through even murky waters.
Try green, which retains its color and shines brightly in both brackish and dark water. For anglers, green is also ideal because it attracts both bait and fish.
Or install more Aries and illuminate the water with different colors (requires additional Capricorn LED dimmer for use in multiple zones)

Arien's underwater lighting is IP68 waterproof and made of solid bronze plate with a lens of 3.5 mm highly durable plastic.
Equipped with a safety system that protects against over/undervoltage, overcurrent and reverse polarity.
Aris is intended for surface mounting and is easy to install. The only required punch is a smaller Ø 18 mm through hole for cable routing.

ATTENTION! When installing in a 24V system, the supplied DC/DC converter (24-12V) is required.
Use a round-head (not countersunk) screw and suitable adhesive/sealant for installation.
It cannot be painted over or pressure washed, and it must only be installed below the water surface.

Light up your boat in all colors underwater with Aries RGBW underwater lighting!

With this impressive RGBW underwater lighting, you can always present your boat in the right light, the way you want.
Aries is suitable for both transom and side mounting on boats of all types and lengths, so you can illuminate the surrounding water the way you want.
Underwater lighting can also be installed on a dock, swimming pool, and hot tub to enhance the ambiance.
Light up your boat with RGBW and 16 million colors!
RGBW not only lets you freely choose between the primary colors red, green, and blue, but now also fine-tune white light and mix it with the primary colors to create richer, brighter, and more vibrant colors.
Aries underwater lighting requires the Capricorn RGBW dimmer (art. 69683) for RGBW to work (see accessories).
The Capricorn LED dimmer is connected between the battery and the lamps and then controlled using the Tuya app or the Capricorn remote control (product 69684).
With the Tuya app, you can turn the light on and off, adjust the brightness, color temperature, choose any RGBW color, and even synchronize the lighting with music.

With its 900 lumens, you can even illuminate murky water and still produce a great light.
This way, nature can't stop you and your boat from expressing your emotions with the brilliant colors of Aries.
Illuminate with blue, which works best in all waters because its short wavelengths break through even murky waters.
Try green, which retains its color and shines brightly in both brackish and dark water. For anglers, green is also ideal because it attracts both bait and fish.
Or install more Aries and illuminate the water with different colors (requires additional Capricorn LED dimmer for use in multiple zones)

Arien underwater lighting is IP68 waterproof and made of solid bronze plate with a lens of 3.5 mm highly durable plastic.
Equipped with a safety system that protects against over/undervoltage, overcurrent and reverse polarity.
Aris is intended for surface mounting and is easy to install. The only required punching is a smaller Ø 18 mm through hole for cable routing.

ATTENTION! When installing in a 24V system, the supplied DC/DC converter (24-12V) is required.
Use a round-head (not countersunk) screw and suitable adhesive/sealant for installation.
It cannot be painted over or pressure washed, and it must only be installed below the water surface.