VHF Sailboat Antennas
VHF antennas designed for sailboats in different lengths.Product groups
VHF Sailboat Antennas group products
/scout-ks-12-1db-vhf-antenni-20cm-067875bceaf173.jpg)
Campaign
The Scout KS-12 antenna is very compact and is designed for all types of boats. The antenna is only 10cm in diameter and its height is 20cm. The antenna looks exactly like the Scout Wave and Sea-Connect antennas, so you get a good-looking combination if you need both a VHF antenna, broadband and wifi.
- Compact size
- Fully waterproof antenna
- Easy to install
- 6 m top performance RG-58 CU MIL Cable
- 2 PL-259 (RG-58) Male connector
- Frequency: 156-162MHz
- Impedance: 50 ohms
- VSWR: < 1.5:1
- Gain: 1db
- Polarization: vertical
- Maximum input power: 50W
- DC ground: yes
- Material: fiberglass
- Weight: 300g
/10986aad263076b22.jpg)
/scout-km-3a-vhf-terasantenni-10m-067875bc37341c.jpg)
Campaign
3 db VHF steel antenna designed for sailboats. Lightweight and flexible antenna with a 1m long electropolished stainless steel whip. Waterproof SO 239 connector. Stainless steel mounting foot included.
- Frequency: 156-162MHz
- Impedance: 50 ohms
- VSWR: < 1.5:1
- Polarization: vertical
- Gain: 3db
- Maximum input power: 50W
- DC ground: yes
- Material: stainless steel
- Mounting: stainless steel mounting bracket
- Antenna length: 1m
- Weight: 300g
/scout-km-3-3db-vhf-antenni-10m-067875bbb618c3.jpg)
Campaign
The KM-3 antenna is designed for the top of the mast. It is made of 1.4mm thick fiberglass shell filled with foam. This makes the mast quiet and completely waterproof. The surface of the antenna is glossy white and UV protected. The antenna is with an N Female connector for the best possible signal strength. This 90cm antenna gives the same performance as its larger version (KS-22) due to its electrical system tuning. The antenna comes with a very durable 3mm stainless steel mounting bracket that ensures a good and easy installation on the mast.
- UV-Protected surface
- Short but still high-performance antenna
- Mounting bracket is supplied with the antenna
- 100% waterproof antenna, foam padding inside the antenna
- Frequency: 156-162MHz
- Impedance: 50 ohms
- VSWR: < 1.5:1
- Polarization: vertical
- Gain: 3db
- Maximum input power: 50W
- DC ground: yes
- Material: fiberglass
- Mounting: stainless steel mounting bracket
- Connection: N female
- Antenna length: 1m
- Weight: 300g
/scout-km-3f-3db-vhf-antenni-10m-067875bbb6ca92.jpg)
Campaign
The KM-3F antenna is designed specifically for sailboats. The antenna is lightweight and flexible and highly weatherproof. The antenna design matches your sailboat perfectly. The antenna is supplied with a stainless steel mounting bracket. Cable not included.
| Frequency | 156-162MHz |
| Impedance | 50 ohms |
| Electrical length | 1/2 ? |
| VSWR | < 1.5:1 |
| Polarization | Vertical |
| Gain | 3dB |
| Max power input | 50W |
| DC ground | Yes |
| Whip material | Fiberglass |
| Connector | SO 239 |
| Mounting | Stainless steel bracket |
| Length | 0.9m (3?) |
| Weight | 0.23 kilo |
- SO 239 Waterproof connector
- The antenna is supplied with a mounting bracket.
- 90cm
/scout-km-3a-kit-vhf-terasantenni-10m-20m-antennijohto-067875bbb66460.jpg)
Campaign
VHF steel antenna package designed for sailboats. Lightweight, flexible and high-quality antenna with an electro-polished steel whip. The package includes a 1.0 antenna, a 20m package of RG-58 coaxial cable, two PL-259 (RG58) connectors and a stainless steel antenna base. Waterproof SO 239 connector.
Package contents
- Scout KM-3A 1.0m steel antenna
- 20m package of RG-58 coaxial cable
- 2 x PL-259 (RG-58) connectors
- Frequency: 156-162MHz
- Impedance: 50 ohm
- VSWR: < 1.5:1
- Polarization: vertical
- Gain: 3db
- Maximum input power: 50W
- DC ground: yes
- Material: stainless steel
- Mounting: stainless steel mounting bracket
- Antenna length: 1m
- Weight: 300g
/scout-km-3f-kit-vhf-antenni-10m-20m-antennijohto-067875bbb71282.jpg)
VHF fiberglass antenna package designed for sailboats. Powerful, stylish and finished antenna that is completely waterproof in structure but also in the connector. The package includes a 0.9m antenna, a 20m package of RG-58 coaxial cable, two PL-259 (RG58) connectors and a stainless steel antenna base. Waterproof SO 239 connector.
Package contents
- Scout KM-3F 0.9m fiberglass antenna
- 20m package of RG-58 coaxial cable
- 2 x PL-259 (RG-58) connectors
- Frequency: 156-162MHz
- Impedance: 50 ohms
- VSWR: < 1.5:1
- Polarization: vertical
- Gain: 3db
- Maximum input power: 50W
- DC ground: yes
- Material: stainless steel
- Mounting: stainless steel mounting bracket
- Antenna length: 1m
- Weight: 300g
/scout-km-4-3db-vhf-antenni-10m-windex-valmis-067875c37165fe.png)
Campaign
The KM-4 antenna is designed for the top of the mast and as an additional feature is the possibility of connecting windex. The antenna is built from 1.4mm thick fiberglass that is sealed with foam to make it waterproof and the body has UV protection to prevent color fading. The antenna has an N Female connector for the best possible signal strength. This antenna provides the same performance as its larger version (KS-22) due to its electrical system tuning. The antenna comes with a 3mm stainless steel mounting bracket and a hex key for windex.
- Frequency: 156-162MHz
- Impedance: 50 ohms
- VSWR: < 1.5:1
- Polarization: vertical
- Gain: 3db
- Maximum input power: 50W
- DC ground: yes
- Material: fiberglass
- Mounting: stainless steel mounting bracket
- Connection: N female
- Antenna length: 1m
- Weight: 300g
/scout-pa-10-pidennysputki-antennijalalle-50cm-067875bc42ccd5.jpg)
Campaign
Extension tube for antenna stand. Makes it easier to mount the antenna, for example, on the side of the cab. Standard 1" thread
- Extension leg 50cm
- Thread 1"
/scout-pa-12-pidennysputki-antennijalalle-1m-067875bc42de03.jpg)
Campaign
Extension tube for antenna stand. Makes it easier to mount the antenna, for example, on the side of the cab. Standard 1" thread
- Extension leg 1.0 m (3.3') length
- Thread 1"
/windex-scout-vhf-50-1db-vhf-antenni-05m-windex-15-integroituna-067875bbb7cbe4.jpg)
This is the product that all sailors have been waiting for and now it is here. Now you can get Scout's high-quality VHF antennas combined with Windex. This unique innovation brings Windex to the head of the Scout antenna. The combination gives you top-quality VHF transmission and reception. And because the Windex 15 is mounted on the antenna head, the airflow from the sails is not disturbed, so the wind direction it gives is very accurate. In addition, the solution frees up space at the top of the mast.
The antenna comes with a 3mm thick stainless steel mounting foot that ensures maximum stability for the installation. The N-Female connector ensures perfect signal.
The antenna comes with a 3mm thick stainless steel mounting foot that ensures maximum stability for the installation. The N-Female connector ensures perfect signal.
- Includes Windex 15 wind direction indicator
- Fully waterproof antenna
- Foam-filled
- Small size, big performance
- UV-Protected coating
- N Female connector
- Length 0.5m
