Water and Fuel Tank Sensors
Water and Fuel Tank Sensors -ryhmän tuotteet
- Material: stainless steel
- SAE 5-hole pitch
- Flange pitch Ø 54 mm
- Resistance value 0 - 190 (OHM)
- Works for all meters that operate between 0 and 190 (OHM) (start value-end value).
- Sensor for Wema fuel and water tank gauges
- With 1 1/4 BSP thread
- For meters that operate between 0-190 ohms
- Stainless
OHM NUMBER 240-30 (USA STANDARD)
A sensor made with reed technology that is suitable for both fuel and water tanks. Made of stainless steel. Sensor mounting with 1 1/4 BSP thread.
- 240-30 ohms (USA standard)
• 0-180 ohms
• Tank depth: 13-66cm
- Pendulum sensor
- 0-180 ohms
- For tank depth: 15-60cm
- Note: Not suitable for use in water tanks.
Wema ASC converts signals from analog tank or engine sensors to NMEA2000.
That makes it ideal for anyone who wants to see tank level or engine data on their NMEA2000 network.
Up to 4 analog sensors can be connected to the ASC-4.
Specifications:
Model: ASC-4 0-190, 10-180, 240-30 or self-defined (4 channels)
Operating temperature: -30 - +75°C
IP rating: IP67
LENGTH = 1
- NMEA2000 converter
- For four analog sensors
- IP rating IP67
Used when multiple sensors and devices are installed on the same NMEA2000 network. In this case, each sensor and device must be assigned its own correct instance number.
The installation tool is also used to reprogram the sensor, for example from fuel to water. The Wema N3/N5 is supplied as a fuel sensor as standard, while the Wema N3H/N5H is supplied as a septic tank sensor as standard.
- NMEA2000
- For programming sensors
Sensor raised.
- Sensor for fuel or water tank
- American version - ohms 240-30
- Length 150mm.
- Gasket set
- For N5/S5 sensor
- Wema original part
- O-ring set
- Suitable for N3/S3 level sensor
- Wema original product
Fuel data management sensor
The Fuel Data Management sensor monitors fuel readings/flow from NMEA 2000 engines and reports fuel usage information such as seasonal fuel used, trip fuel used, and total fuel used.
Product package contents:
- Fuel data management sensor
- NMEA2000 network T-connector
- Cable length: 0.5 m
- Connects to the network on NMEA 2000® engines
- Collects fuel usage information from fuel flow data from compatible NMEA 2000® engines or engine interfaces
- Supports up to three motors per sensor
