Water pump accessories
Water pump accessories -ryhmän tuotteet
Replacement pump head for Gulper 320 and Gulper 220 models.
Includes:
1 x Diaphgram
1 x Nyloc nut M5
1 x Hex head screw M5 x 16 mm
1 x Tricuspid Exhaust Valve
1 x Marine connection 3/4” and 1”
1 x Inlet and outlet valve
1 x Valve plate
1 x Exhaust valve housing
Recessed stainless steel hose connection with quick release coupling. Built-in check valve that closes when the hose is removed. Connection female RF feedthrough 1/2" thread. Connection male Nylon 3/4" thread.
- Installation in bulkhead
- The hose can be connected and disconnected under pressure
- Durable bayonet mount
- Sealed with two Viton O-ring seals
- High flow capacity
- Body made of 316 stainless steel 1/2" BSP thread
- Nylon 66 connector with 3/4" BSP thread
- Recessed hose connection
- Built-in check valve
- 1/2" and 3/4" threads
Suitable for example for Johnson Pump washing pump sets.
- Nylon
- With ball valve
- Connection 3/4"
- Pressure switch compatible with the following models:
- Aqua Jet WPS 2.4 / 2.9 / 3.4 / 4.0 / 5.0 / 5.2
- Uno WPS 3.4 / 5.0 / 5.2
- Uno Max 2.9
- Duo WPS 10.0 / 10.4
- WD 2.9
- Painekytkin
- 2.8 bar
- Capacity: 2 liters
- Connector: 1/2"
- Diameter: 160mm
- Height: 315mm
The PUMProtector™ Inlet Strainer, a filter that mounts directly on the pump, protects the pump and water fixtures from debris and other particles. The filter has a transparent cover for easy inspection. The filter design and connectors make it easy to remove and service the filter.
- Screen density/Mesh: 40
- Filter housing: Polyamide 66, black
- Cover: Clear acrylic
- O-rings: Silicone and EPDM
- Mesh: Stainless steel, 40 mesh
- Max. liquid temperature: +50°C – +120°F
- Max. drinking water temperature: +30°C – +85°F
- KlickTite™ connectors: 2 x ½'' hose / ?' BSP, 2 x ¾' hose / ½' BSP
- Manufacturer's part number 09-24653-001
0.5 liters, 3/8", internal/external thread. Ø95x202.
2 liters, 1/2", internal/external thread. Ø 138x274.
- Diaphgram
- Suitable for 5926
- Pressure switch
- For Seaflo kitchen pump
- Original part
Pressure switch for Seaflo 51 and 55 series diaphragm pumps.
Pressure: 60 PSI
Maximum current: 20A
- Pressure switch
- For Seaflo pumps
- Original part
- Diameter: 120mm
- Capacity: 150l/min
The accumulator tank is used so that the pressure water pumps do not have to start every time the tap is opened. Reduces power consumption, noise and wear on the pressure water pump. Built-in rubber diaphragm that does not require maintenance.
- Capacity: 1 liter
- Max flow: 8.6 liters/min
- Connections: 13mm
- Dimensions: 300x105mm
- Water filter
- 1/2"-14 MNPT thread
- For Seaflo kitchen pumps
- Length including connections: 270mm
- Diameter: 90mm
- Connection: 12.5mm
- Capacity: 1 liter
- Seal kit
- Fits 4470 & 4471
- 10 parts
IS14 In-line filter for tubing ø16 mm.
In-line filter made of transparent nylon with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning. Connection 1/2'.
R1/2" thread/hose connector. Fits directly into Shurflo pump. For Ø 16 mm hose. 1/2" connection.
In-line filter made of transparent nylon with AISI 304 stainless steel net. Snap-on locking for easy inspection and cleaning. Connection 1/2'.
