Jabsco Impeller Pump 080 1" BSP
- Jabsco 80 pump body without motor.
- Capacity 80 l/min (1500rpm)
- Suction height up to 5m
- Connection 1" BSP
- Supplied with neoprene impeller
- Oil-resistant nitrile impeller available as an option
Jabsco self-priming impeller pump for mounting on AC motors. Pump body suitable for IEC71 standard D80 motors. Capacity stated at maximum 1500 rpm. Capacity based on pumping water at 20°C with neoprene impeller; higher temperatures or viscosity will reduce capacity.
The impeller pump has a very wide application range and is suitable for a wide range of liquids. The pump must not be run dry for more than 30 seconds. Due to the risk of dry running, we recommend the use of a vacuum switch.
Tuotenr: 22870-2001
- Jabsco 80 pump body without motor.
- Capacity 80 l/min (1500rpm)
- Suction height up to 5m
- Connection 1" BSP
- Supplied with neoprene impeller
- Oil-resistant nitrile impeller available as an option
Jabsco self-priming impeller pump for mounting on AC motors. Pump body suitable for IEC71 standard D80 motors. Capacity stated at maximum 1500 rpm. Capacity based on pumping water at 20°C with neoprene impeller; higher temperatures or viscosity will reduce capacity.
The impeller pump has a very wide application range and is suitable for a wide range of liquids. The pump must not be run dry for more than 30 seconds. Due to the risk of dry running, we recommend the use of a vacuum switch.
Tuotenr: 22870-2001
Suosittelemme sinulle
