CTEK

The solar panel charging kit is a perfect match for the CS FREE. It provides fast and reliable solar power so you can charge or even use your CS FREE wherever you are. Made of highly durable fiberglass, you can easily unfold it and connect it to the CS FREE in seconds. You will become completely independent from the power grid. You can charge and maintain your vehicle battery or charge portable devices such as smartphones, tablets and laptops, even when you don’t have access to a power outlet. The charging kit features smart and efficient silicon cells with a specially developed safety lock that ensures the pack delivers just the right amount of power and protects the battery and your devices from overvoltage. The device is waterproof, weatherproof and durable. The carrying case has an adjustable stand that can be flexibly positioned at a 180-degree angle, making it perfect for outdoor use.

• Charges batteries with a capacity of 14–150 Ah.
• Maintains large batteries with a capacity of up to 225 Ah.
• Compact and robust design – splash and dust resistant according to IP65 rating
• Optional cold program for more efficient charging in winter temperatures
• Power supply program – can be used as a 12-volt power source to protect electrical settings.
• Recovery program – special program for recovering deeply discharged batteries
• 5 year warranty

1. Desulfation – This phase detects sulfated batteries. It removes sulfate from the lead plates of the cell using current and voltage pulses, which improves battery capacity.
2. Soft Start – Tests the battery’s charge capacity. This step prevents continued charging of a faulty battery.
3. Basic charge – The stage charges the battery at maximum current until approximately 80% of the battery's charge capacity is reached.
4. Absorption - ready-to-use battery – The battery is charged at a decreasing current until 100% of the battery's charge capacity is reached.
5. Analysis – This step tests whether the battery can hold a charge. If the battery cannot hold a charge, it may need to be replaced.
6. Regeneration – You can add a regeneration phase to the charging process by selecting the RECOND program. During this process, the voltage increases, causing controlled gassing in the battery. Gassing mixes the battery acid and restores the battery’s performance.
7. Maintenance ( battery fully charged) – Maintains the battery voltage at the maximum level by charging it at a constant voltage.
8. Pulse, Trickle Charge – This stage maintains the battery’s power at 95–100%. The charger monitors the battery voltage and provides a pulse if necessary to keep the battery fully charged.

The D250SE is a fully automatic, 5-stage charger that delivers up to 20A to all 12V lead or lithium batteries* from 40-300Ah. It has selectable charging programs for AGM and lithium* batteries. The dual input allows you to charge from a generator, solar panel/wind power. When the service battery is fully charged, the D250SE automatically directs the charging current to the starter battery. The D250SE can maintain a stable output of up to 20A on vehicles with intelligent ECU-controlled alternators and also has a temperature sensor to enable optimized charging regardless of weather conditions.

FEATURES:
• 20 fully automatic temperature-compensated charges for 40-300 Ah batteries while on the move
• Dual input (solar panel and generator in parallel)
• Smart generator compatible
• Lithium* and lead-acid modes available
• Solar panel controller with maximum power
• Maximum Power Point Tracking (MPPT)

12V versatile and fully automatic power management system for dual battery systems. The Smartpass 120S is a 120 amp power management system that distributes, regulates and maximizes the amount of energy available from the alternator to the service battery and loads. The SMARTPASS 120S handles all 12V batteries with capacities from 28 to 800 Ah. The Smartpass 120S charger’s battery guard ensures that critical equipment such as radio, emergency lights and navigation systems always receive power and take priority when the service battery voltage drops, resulting in less critical loads being disconnected. The device’s battery guard protects the service battery from being completely discharged and the built-in temperature protection function reduces the charging current before the battery temperature gets too high. The SMARTPASS 120S is compatible with the 20A D250SA and D250SE chargers.

Features

• Automatic battery isolator replaces separate diodes and VSR relays
• Fully automatic
• Maximize battery life
• Battery guard protects the operating battery from deep discharge
• Dynamic overcurrent protection that can handle up to 350 amps for short periods of time, for example for winch operation.
  
• Safety-enhancing temperature sensor that protects the battery from overheating.
• Splash and dust protected (IP65).
• Two-year warranty.

This indicator kit is designed for easy installation in vehicles and uses a clear "traffic light" system to show the battery charge level. Connect the charger to the indicator
connection, install the display in a suitable location and route the cable to the battery.

The M15 charges a wide range of marine batteries quickly and efficiently. The M15 is the perfect 15 amp battery charger for all boat owners. It has many features, such as a recovery mode for reconditioning deeply discharged wet and Ca/Ca batteries and a temperature sensor that optimizes charging if the temperature deviates from +25°C. It also has a lithium* program for lithium* batteries. The M15 is supplied with a long 4 meter cable with M10 loop connectors for easy boat installation.

The CT5 POWERSPORT is an automatic charger designed for charging and maintaining 12V batteries for jet skis, motorcycles, mopeds and other similar vehicles. This charger ensures that the battery is always full and the vehicle is ready for use, even when stored for long periods.

The CT5 POWERSPORT charger has three fully automatic charging programs:

Normal: for all lead-acid batteries, including AGM batteries.
Lithium: for all lithium batteries.
Recond: for deeply discharged wet lead-acid batteries.
The charger can be used directly connected to the battery without fear of overloading or undercharging. It is easy to use and compatible with all 12V
with batteries.

Convenient and easy to use
Test and restore battery capacity
Power: Max. 2.3 A
No sparks
Reverse polarity protected
Short-term protection
The CT5 POWERSPORT charger is an excellent choice if you want to keep your battery in good condition and ensure that your vehicle is always ready to drive.

New battery charger with maintenance charging.

CS ONE uses APTO™ technology to automatically detect the type of 12V battery in use and adapt the charging program accordingly. You don't have to manually select a program or change settings; just connect the charger to the battery and it will start charging.

Pole-independent pike jaws: You can connect pike jaws without worrying about the correct connection because they do not cause sparks.
Bluetooth® Active: Use the CTEK app to take advantage of additional features such as "RECOND" to recondition deep-discharged lead-acid batteries, "WAKE UP" to wake up lithium batteries and "SUPPLY" to use the charger as a 12V power supply.
Easy-to-read display: Time cells show when the battery is full and ready to use.
Battery capacity: 3-180Ah, charging current 8A.
Long-term maintenance charging: Safe to leave connected for extended periods of time.
With a new, more durable design and a unique mounting system, the CS ONE is easy to handle and connect to CS accessories. The charger comes with a 5-year warranty and is the perfect solution for taking care of your batteries.

Carry and store your battery charger safely. The CS STORAGE CASE is durable, strong and lightweight, so you can store your battery charger in the best possible way and protect it from the elements wherever you go. Designed and tested in Sweden, the CS STORAGE CASE is made of strong 600D water-repellent nylon with a protective padded interior and a convenient carrying handle. The metal zipper allows quick access to your battery charger, so it is ready to use when needed. Durable. Water-repellent. Lightweight.

CS FREE is the world's first fully portable battery charger with trickle charging and Adaptive Booster. It quickly and safely jump-starts your discharged battery without the need to connect it to the mains. In other words, it is a 12V power bank for your vehicle that works with both lead and lithium batteries (12V LiFePO4). It also keeps your portable tech devices like phones, laptops and cameras fully charged. Charge it, take it with you and use it anywhere!

• No need to be plugged into an outlet.
• The internal battery charges in 1 hour.
• Stays fully charged for up to a year.
• Adaptive Boost safely charges your dead battery in 15 minutes without damaging your vehicle's electronics.
• Charges and maintains lead and lithium batteries and keeps them in top condition.
• Easy to use - Clear and easy-to-read display
• Charge portable devices - smartphones, tablets, laptops, etc.
• Charges or operates on battery power and solar energy.
• Works with all 12V lead-acid batteries, AGM, EFB, Gel and LiFePo (lithium) batteries 10-130Ah.