Marinco
Marinco group products
- Solar fan
- 3"
- Stainless steel
- on/off
- With battery
- 2500mAh
- In and out
- Withstands up to 40A
- The package includes a female connector/panel and a plug/male
- 2-pin connectors, cables not included
- ConnectPro system
- 2-pole
- For trolling motor
- O-ring seal
High quality shore power adapter. Molded plastic housing and LED indicator. Cable area: 2.5mm²Waterproof connector with additional protective coverCE approvedIEC60309 plug 2P+E(6H), 250V/50Hz
• 1 meter
• Marinco 16A
• Waterproof connector
Circulates air and prevents mold and humidity. The air conditioner works up to 24 hours without a full charge from sunlight.
- Blowing and sucking
- Rechargeable NiMh battery
- High capacity NiMh rechargeable battery
- No wiring required
- Stainless steel
- 4"
High quality ground cable. Molded contact with LED display.
• Cable cross-section: 2.5 mm²
• Waterproof connector with additional cover
• CE approved
• IEC60309 plug 2P+E(6H), 250V/50Hz
The light has two adjustment settings: 370 degrees horizontally and 120 degrees vertically (75 degrees up and 45 degrees down).
The lamp has a 100-watt H3 halogen bulb with an optimized reflector that produces a uniform light output up to 280 meters.
Easy to install thanks to the wireless remote control (control range 65m).
- 100W H3 halogen
- Wireless remote control
- Range up to 280m
Shore power socket for installation on boats. Made of UV-stabilized fiberglass reinforced plastic. Durable construction and corrosion resistant. Maximum current: 16 amps Voltage: 230 volts
- Marinco socket
- 16A
- 230V
15M32AXP Shore power cable with Marinco europlug, note that the barb is facing outwards on the female connector.
- Waterproof protective head, CE approved
- H07BQ-F 3G 4 mm² cable
- IEC 60309 plug 2P+E [6H], 250V/50Hz
- NEMA SS-1 connector with LED indicator
The lamp can be adjusted in two ways: 370 degrees horizontally and 120 degrees vertically (75 degrees up and 45 degrees down).
The lamp has a 100-watt H3 halogen bulb with an optimized reflector that produces a uniform light output up to 280 meters.
Installation is easy thanks to the wireless remote control (65m range).
• Wireless remote control
• Range: 65 m
Maximum current: 70 A.
Universal model for 2 or 3-pole, 12, 24, 36, 48, 12/24 or 24/36 volts.
The plug has an O-ring seal and cable strain relief.
• For trolling motor
• O-ring seal
Shore power connector made of stainless steel (AISI 316). Strong cover with screw seal. Robust construction and corrosion-resistant construction ensure a long service life.
- Current: 16 amps
- Voltage: 230 volts
- Stainless steel
Signal horn for flush mounting. Supplied with replaceable plastic covers, black and white.
Dimensions: 12 x 5.8cm
Depth: 8cm
Power supply: 12 volts
Sound level: 107 dBA at a distance of one meter
Frequency: 370 +/-20 Hz
Marinco locking female connector 32A 230V for shore power. The shore power contact has corrosion-resistant connectors and terminals suitable for marine use. The body is made of yellow nylon and has a grooved design for a secure grip. Maximum current: 32 amps, Voltage: 230 volts.
- Female connector
- 16A or 32A
- Marinco
High quality shore power adapter. Molded plastic housing and LED indicator. Cable area: 3x2.5mm². Waterproof connector with additional protective cover. CE approved. IEC60309 plug 2P+E(6H), 250V/50Hz.
- Marinco 16A
- Waterproof connector
- Withstands up to 40A
- For 12V, 24V and 36V systems
- The package includes a female connector/panel and a plug/male
- 3-pin connectors, cables not included
- ConnectPro system
- 2-pole
- For trolling motor
- For bow thrusters
- O-ring seal
Shore power connector set for cable. Includes: female connector, waterproof cover and cover.
- Max current: 16A
- Max voltage: 23 volts
- Female
Marinco connector fits 16A stainless steel and plastic sockets and has a CEE plug on the other end. Equipped with an LED light that indicates that the current is flowing.
- Cable approved: H07BQ-F 3 × 2.5mm2 for outdoor use
- IEC 60309 connector, 2P + E, 250V/50Hz
- Waterproof connection according to CE standard
- 25m
- Manufacturer's product number 2812
NOTE: Batteries are empty when delivered and require 24 hours of outdoor charging before being fully charged.
Specifications:
- Airflow: 23 m³/hour
- Outer diameter: 228mm
- Bottom diameter/connection: 94.5mm
- Height above the lid: 68mm
- Maximum layer thickness: 44mm
How many fans do I need for my boat?
It varies. Marinco's guidelines suggest the following:
- Boats up to 24 feet = 1 fan
- Boats 24-40 feet = 1 exhaust and 1 inlet air valve
- Boats over 40 feet = 2 exhaust and 1 inlet air valve
To ensure effective ventilation, the fan must be able to ventilate the interior, for example with a swan neck valve or ventilation grilles.
Calculating the boat's air volume:
- AxBxCx70% = total air volume of the boat
- A = length of the interior of the boat (without cockpit)
- B = width of the boat
- C = inside height of the boat
Hole size: 95mm
NOTE! To ensure longer battery life, the fan should not be left on 24/7, especially when the sun is not charging the battery.
- Powered by solar cells
- With battery
- White plastic dome
A reliable waterproof cover for your 16A Marinco female connector. This cover is made from durable vinyl plastic, ensuring a strong construction. The screw thread allows you to easily lock the cover in place, ensuring a secure and tight connection. This cover is ideal for both indoor and outdoor use, especially suitable for environments where water and moisture may be present.
Length: 110mm.
Inner diameter: 45mm.
Outer diameter: 77mm.
- Cover for female connector
- Locked with a thread
- Marinco
• Max 15 amps
• SeaLink locking system
