Mente Marine
Tuoteryhmät
Mente Marine -ryhmän tuotteet
Kampanja
The ACS R automatic trim switch adjusts the boat's lateral position. The switch is ideal for controlling the trim levels of a boat equipped with an outboard or sterndrive. Automatic correction of lateral list caused by wind or load makes travel more comfortable and safe, and improves fuel economy.
When the speed changes, the course changes or the passengers move, the ACS trim control automatically corrects the boat's attitude by adjusting the position of the trim tabs. The system is easy to install for both hydraulic and electromechanical trims. All the functions related to the control of the device are included in the ACS R and ACS RP control panel and no separate devices need to be installed. It is enough to replace the existing switches with this new control panel.
All panels feature a trim tab position indicator, manual trim tab adjustment, and automatic tab return when speed drops below the glide threshold. Works great with all common trim systems.
When the speed changes, the course changes or the passengers move, the ACS trim control automatically corrects the boat's attitude by adjusting the position of the trim tabs. The system is easy to install for both hydraulic and electromechanical trims. All the functions related to the control of the device are included in the ACS R and ACS RP control panel and no separate devices need to be installed. It is enough to replace the existing switches with this new control panel.
All panels feature a trim tab position indicator, manual trim tab adjustment, and automatic tab return when speed drops below the glide threshold. Works great with all common trim systems.
- Adjusts the boat's lateral position
- Compatible with the following hydraulic trim tabs: Bennett,
Instatrim, Trimmaster, QL Volvo Penta, TFX Teleflex, TX Controls - Compatible with the following electromechanical trim tabs: Lectrotab, Lenco, Eltrim, Ultraflex
- Suitable for boats 15 - 40 feet long
- Panel size 8 x 7.5 x 1 cm
- Waterproof IP68
- Power supply 0.02 A (when trim levels are not activated)
- Operating temperature -10 to +85 degrees
Kampanja
Mente Marin Automatic Trim Plane Panel ACS RP
Fully automatic trimming system. The system automatically adjusts the angle of the trim tabs while driving, ensuring perfect balance and maximum driving comfort.
Faster planning
The system helps the boat get on plan quickly and efficiently, which reduces fuel consumption.
Smart memory function
The trim levels automatically return to their previous setting each time you start, making operation easy and hassle-free.
General compatibility
The system is suitable for both electric and hydraulic trim tabs and is compatible with products from all major manufacturers.
Stable and safe driving
The system reduces boat roll and improves stability in all directions, increasing travel comfort in all conditions.
About the Mente Marin Automatic Trim Panel ACS RP system
The Mente Marin Automatic Trim Panel ACS RP (Roll & Pitch) is one of the most advanced automatic trim systems on the market for both electric and hydraulic trim tabs. With a single control panel, you get a fully automatic system that stabilizes the boat both longitudinally and laterally. In addition, the ACS RP improves the boat's performance, fuel economy and travel comfort.
Principle
Modern pleasure boats increasingly use a V-shaped hull, which provides a smoother ride in waves. The deeper the V-bottom, the greater the need for trim tabs to maintain a stable driving position. The lateral balance of the boat is affected by passenger positioning and wind direction, while the longitudinal driving position depends on speed and load.
When the course changes or passengers change seats, the boat's trim needs to be readjusted to maintain balance. Constant manual adjustments can be distracting and at high speeds even a safety risk. Mente Marin ACS RP takes care of this automatically. The system adjusts trim levels in real time and corrects the boat's driving position as the course, wind or load changes. The end result is a smooth, safe and comfortable ride without manual trimming.
- Adjusts the trim tabs in the lateral and longitudinal directions
- Compatible with the following hydraulic trim tabs: Bennett,
- Instatrim, Trimmaster, QL Volvo Penta, TFX Teleflex, TX Controls
- Compatible with the following electromechanical trim tabs: Lectrotab, Lenco, Eltrim, Ultraflex
- Suitable for boats from 15 to 40 feet in length
- Panel size 8 x 7.7 x 10 cm
- Waterproof IP68
- Maximum load 18 A (when activating trim levels)
- Power supply 0.02 A (when trim levels are not activated)
- Operating temperature -10 to +85 degrees
The ACS A automatic trim system adjusts the boat's running position in both the lateral and longitudinal directions. The system is ideal for boats with two steering points or where the installation location is not suitable for installation according to the instructions (e.g. a rotating steering console). Automatic bow angle correction speeds up planing and improves fuel economy, and lateral correction increases comfort.
When the speed changes, the course changes or the passengers move, the ACS trim control automatically corrects the boat's attitude by adjusting the position of the trim tabs. The system is easy to install for both hydraulic and electromechanical trims. All the functions related to the control of the device are included in the ACS R and ACS RP control panel and no separate devices need to be installed. It is enough to replace the existing switches with this new control panel.
All panels feature a trim tab position indicator, manual trim tab adjustment, and automatic tab return when speed drops below the glide threshold. Works great with all common trim systems.
A second control panel can be installed as an accessory for the ACS A trim system, for example in the upper cockpit.
- Lateral and longitudinal steering
- Manual control and trim level position indicator
- Automatic adjustment of the driving position according to the prevailing conditions
- Suitable for all common trim systems
- Easy to install in place of an existing switch panel
Kampanja
Hydrotab Interceptor trim tab package 600SR
The package includes 2 pairs of 300SR interceptors (4 in total) made of composite and a Moby Automatic Controller.
The new SR interceptor series is based on HydroTabs proven design using pneumatically controlled interceptors. No electricity or electronics underwater ensures the highest reliability. The interceptor plates automatically clean themselves of any growth.
Advantages of Hydrotab
- Fast response and maximum control over your boat.
- Better ride and fuel savings.
- Installation is easy: all you need is a hose from the compressor to each trim plate. Quick connectors that just snap into place.
- Custom 12VDC, but also available in 24VDC
Hydrotab Interceptors Benefits
- Immediate trimming effect and stabilization.
- Dramatically improved boat behavior in bad weather conditions.
Maximum fuel economy
- Zero errors in interceptors even in difficult conditions and in abundant vegetation.
- Top performance and reliability, yet cost-effective.
MOBY automatic controller
- Experience the minimalist design of the controller that blends seamlessly with panels and gauges.
- The innovative IP68 joystick system, ideal for jet skis, combines with impact-resistant Gorilla Glass and an anti-reflective display.
A new intuitive user interface and easy NMEA 2000 setup make this a complete system with a 3.5-inch wide color display and integrated IMU-GPS antennas.
Dimensions
- Length: 300mm
- Width: 73mm
- Height: 116mm
- Blade size: 30mm
- Maximum fuel economy
- Moby autopilot
- 4 pcs 300SR
Kampanja
Hydrotab 750SR trim tab set
Hydrotab interceptor trim plate package 750SR. A complete set that includes 1 pair of 300SR and 1 pair of 450SR interceptors (total of 4) made of composite and a Moby Automatic Controller.
The new SR interceptor series is based on HydroTabs proven design using pneumatically controlled interceptors. No electricity or electronics underwater ensures the highest reliability. The interceptor plates automatically clean themselves of any growth.
Benefits
- Fast response and maximum control
- Better ride and fuel economy
- Easy installation with just one hose from the compressor to each trim tab
- Available in 12VDC, but also available in 24VDC
MOBY Automatic controller
Experience the minimalist design of the controller that blends seamlessly with panels and gauges.
The innovative IP68 joystick system, ideal for jet skis, combines with impact-resistant Gorilla Glass and an anti-reflective display.
A new intuitive user interface and easy NMEA 2000 setup make this a complete system with a 3.5-inch wide color display and integrated IMU-GPS antennas.
Dimensions
- 300SR: Length 300mm, width 73mm, height 116mm, blade dimension 30mm.
- 450SR: Length 450mm, width 73mm, height 116mm, blade dimension 30mm.
- Maximum fuel economy
- Moby autopilot
- 2 pcs 300SR + 2 pcs 450SR
