NOA
NOA -ryhmän tuotteet
Noa Basic NOA Basic is a convenient hybrid cover rack that combines the features of an A-rack and a deck rack. It can be used both on land and directly on the boat deck, making it ideal for adapting to different boat types and protection needs. The model we offer is designed for boats up to 8 meters long, and its length can be easily adjusted by removing the top bar or sawing it to the right length with a hacksaw. You can also extend the rack, as it is fully compatible with all NOA tubes and parts.
Flexible conversion to D-rack You can use the NOA Basic as a deck rack by cutting the 30mm tubes of the A-legs to the desired length with a hacksaw. This allows the rack to be placed directly on the boat deck instead of on the ground, giving maximum flexibility and adaptability.
Easy installation and dismantling
The installation of the NOA Basic protective stand is simple and quick. Start by installing the plastic telescopic locks and then continue by installing the T-joints. Make sure that the small button on the T-joint fits into the hole in the telescopic leg to prevent the joint from slipping out.
If you have trouble removing the top rail, you can use two T-joints to get a better grip. Be especially careful in cold weather conditions, as it can be difficult to get a good grip on the pipe.
Tips for smooth processing
Check that all parts are included in the package. Smaller tubes may be inside larger tubes depending on the model.
Assemble the rack at home and mark the parts with tape or a pen to make installation easier.
Mark the center of the tarp so you know where to place it.
If more than one person is assembling the rack, make sure to have several 8mm Allen keys (Allen key not included).
Accessories for extra stability
The stability and functionality of the NOA Basic protective stand can be improved with several accessories:
Brackets: Purchase NOA brackets and NOA end pieces that can be used to attach the rack legs to the boat's existing railings.
Crossbars: Complete with crossbars and brackets that can be used to improve the stability of the A-legs. Can be installed on Ø30 and Ø35 mm pipes.
Telescopic legs: Additional telescopic legs that can be used to strengthen and stabilize the stand.
Storage Bag: Store the rack and all parts in a handy bag during the summer months when the rack is not being used on the boat.
The NOA Basic protective rack is made in Sweden from high-quality anodized aluminum, which ensures durability and corrosion resistance. The protective rack is designed to provide maximum protection for your boat during the winter season, and is easy to assemble and store for the summer.
- Complete package
- Aluminum tubes
- Affordable cover stand
- Weight: 14Kg
- Length: 8m (4 x 2 m top bars)
- Telescopic legs: 2.3-3 m (4 pcs), 1.5-2 m (2 pcs)
NOA reel stands are suitable for all sailboats with a bow and stern rail or a side rail. Thanks to the stand, the tarpaulin does not attach to the hull of the boat, which ensures good ventilation and prevents the tarpaulin from rubbing against the hull of the boat. The reel stand can be adjusted in two directions, in height using telescopic legs and by moving it away from the boat. The moving is done using a cantilever tube connector, which is attached to the side rail.
The number of pairs of legs can be selected from the drop-down menu. 2 of the pairs of legs (front and rear) are handrail-mounted, the rest are attached to the legs of the mantook.
Reel stand 4/6 includes 2 pairs of legs for front and rear railing brackets and 4 pairs of legs for mantook legs
Reel stand 5/7 includes 2 pairs of legs for front and rear railing brackets and 5 pairs of legs for mantook legs
NOA tarpaulin racks are made of anodized aluminum tubes and die-cast aluminum connectors. The parts that are attached to the boat are made of profile. The ends are protected with plastic plugs. The rack is lightweight and fits into a small package and is easily modified when needs change. Very easy to assemble and disassemble. When assembled correctly, a very sturdy structure is created that will not break the tarpaulin and can withstand even the strongest storms.
- Rack length: 12m
- Number of support legs per side: selectable
- Maximum boat length: 4.2 m
The NOA deck rack is designed for sailboats and motorboats with a length of 10-12.5 meters (32-41 feet). The hull length is 11-13 meters and it is built with telescopic legs that are attached to the bow and stern rails of the boat (pulpits and pushpits). The legs rest on the side of the boat, the cabin roof or the open space, which makes the structure stable and lifts the tarpaulin off the boat, providing good ventilation and protection during winter storage.
The structure is supplied in standard lengths and the brush tubes can be shortened or adjusted if necessary if they extend too far. In addition, the frame can be extended with additional pairs of legs or brush tubes. Thanks to the modular system, the deck press frame can be easily adapted to the shape and needs of your boat.
Tip: Always choose a frame that is slightly longer than your boat. The brush tubes should not extend more than 30 cm over the bow or stern of the boat, otherwise the tarpaulin may be damaged.
Like all NOA products, this deck press frame is made of high-quality anodized aluminum, which makes the structure lightweight, durable and corrosion-resistant. The structure provides reliable protection for your boat during the winter and is easy to assemble, disassemble and store for the summer season.
Easy installation
The assembly begins by placing the rearmost pair of pulpit legs together with one of the brush tubes. The frame is then built forward section by section, placing the legs at even intervals. If any brush tube is too long, it can easily be cut or removed.
Always make sure that all parts are included in the package before installation. Smaller pipes may be tucked inside larger ones to save space. A practical tip is to mark the parts with tape or a marker during the first installation - this will make assembly easier in the future.
Tips for smooth operation
Mark the center of the tarpaulin to make it easier to position. If more than one person is involved in the installation, make sure each person has their own 8 mm Allen key. During disassembly in cold weather, it may be helpful to use two T-joints to give you a better grip on the brush tubes.
- Suitable for sailboats and motorboats: 10-12.5 m (32-41 ft)
- Frame length: 11-13 m (4 x 2m + 2 x 2.5m brush tubes)
- Legs: telescopic deck legs and legs for pulpit/pushpit railings, Ø30/35 mm
- Material: anodized aluminum
- Allen key: 8 mm (1 piece included in the package)
Package contents
Box 1/2
- 4 × Brush tube 2 m (Ø35 mm)
- 2 x Brush tube 2.4m (Ø35 mm)
- 2 × Cover leg Ø35/30 mm, 1.25 + 0.9 m
- 4 × Cover leg Ø35/30 mm, 1.25 + 1.5 m
- 2 × Leg for pulpit/pushpit railing Ø35/30 mm, 0.9 + 0.9 m
- 2 × Leg for pulpit/pushpit railing Ø35/30 mm, 1.25 + 1.5 m
- 5 × Connection lock
Box 2/2
- 2 × End cap
- 6 × Plastic foot
- 10 × T-joint
- 1 × Allen key 8 mm
- 4 × NOA bracket Ø30/35 mm
- 10 × Telescopic lock
NOA deck racks are suitable for all sailboats and motorboats with a bow and stern rail or side rail with an outer tube diameter of 22mm or 25mm. The rack fits securely on the boat with NOA mounting parts. The deck legs can be placed against the edge of the railing, the cabin ceiling or another suitable place on the deck. Alternatively, they can also be placed on the seat pan, which ensures excellent balance. The deck rack is available in seven different lengths, from 7 meters to 13 meters.
NOA tarpaulin racks are made of anodized aluminum tubes and die-cast aluminum connectors. The parts that are attached to the boat are made of profile. The ends are protected with plastic plugs. The rack is lightweight and fits into a small package and is easily modified when needs change. Very easy to assemble and disassemble. When assembled correctly, a very sturdy structure is created that will not break the tarpaulin and can withstand even the strongest storms.
- Rack length: 11m
- Number of pairs of legs on the bow (pictured A): 1 Pair
- Number of pairs of stern railing legs (pictured B): 1 Pair
- Number of pairs of legs on the cover (pictured C): 3 pairs
The NOA deck rack is designed for sailboats and motorboats with a length of 7–9.5 meters (22–31 feet). The hull length is 8–10 meters and it is built with telescopic legs that are attached to the bow and stern rails of the boat (pulpits and pushpits). The legs rest on the side of the boat, the cabin roof or the open space, which makes the structure stable and lifts the tarpaulin off the boat, providing good ventilation and protection during winter storage.
The structure is supplied in standard lengths and the brush tubes can be shortened or adjusted if necessary if they extend too far. In addition, the frame can be extended with additional pairs of legs or brush tubes. Thanks to the modular system, the deck press frame can be easily adapted to the shape and needs of your boat.
Tip: Always choose a frame that is slightly longer than your boat. The brush tubes should not extend more than 30 cm over the bow or stern of the boat, otherwise the tarpaulin may be damaged.
Like all NOA products, this deck press frame is made of high-quality anodized aluminum, which makes the structure lightweight, durable and corrosion-resistant. The structure provides reliable protection for your boat during the winter and is easy to assemble, disassemble and store for the summer season.
Easy installation
The assembly begins by placing the rearmost pair of pulpit legs together with one of the brush tubes. The frame is then built forward section by section, placing the legs at even intervals. If any brush tube is too long, it can easily be cut or removed.
Always make sure that all parts are included in the package before installation. Smaller pipes may be tucked inside larger ones to save space. A practical tip is to mark the parts with tape or a marker during the first installation - this will make assembly easier in the future.
Tips for smooth operation
Mark the center of the tarpaulin to make it easier to position. If more than one person is involved in the installation, make sure each person has their own 8 mm Allen key. During disassembly in cold weather, it may be helpful to use two T-joints to give you a better grip on the brush tubes.
- Suitable for sailboats and powerboats: 7–9.5 m (22–31 ft)
- Frame length: 8–10 m (5 × 2 m brush tubes)
- Legs: telescopic deck legs and legs for pulpit/pushpit railings, Ø30/35 mm
- Material: anodized aluminum
- Allen key: 8 mm (1 piece included in the package)
Package contents
Box 1/2
- 5 × Brush tube 2 m (Ø35 mm)
- 4 × Cover leg Ø35/30 mm, 1.25 + 0.9 m
- 2 × Cover leg Ø35/30 mm, 1.25 + 1.5 m
- 2 × Leg for pulpit/pushpit railing Ø35/30 mm, 0.6 + 0.9 m
- 2 × Leg for pulpit/pushpit railing Ø35/30 mm, 1.25 + 0.9 m
- 4 × Connection lock
Box 2/2
- 2 × End cap
- 6 × Plastic foot
- 10 × T-joint
- 1 × Allen key 8 mm
- 4 × NOA bracket Ø30/35 mm
- 10 × Telescopic lock
NOA outlaying frame are suitable for all sailboats with a bow and stern rail or a side rail. Thanks to the stand, the tarpaulin does not attach to the hull of the boat, which ensures good ventilation and prevents the tarpaulin from rubbing against the hull of the boat. The reel stand can be adjusted in two directions, in height using telescopic legs and by moving it away from the boat. The moving is done using a cantilever tube connector, which is attached to the side rail.
Reel stand 4/6 includes 2 pairs of legs for front and rear railing brackets and 4 pairs of legs for mantook legs
NOA tarpaulin racks are made of anodized aluminum tubes and die-cast aluminum connectors. The parts that are attached to the boat are made of profile. The ends are protected with plastic plugs. The rack is lightweight and fits into a small package and is easily modified when needs change. Very easy to assemble and disassemble. When assembled correctly, a very sturdy structure is created that will not break the tarpaulin and can withstand even the strongest storms.
- Rack length: 10m
- Number of support legs selectable
- Boat max. width: 3.7m
Jalkaparien määrä valittavissa alasvetovalikosta. Jalkapareista 2 (etu- ja taka) on kaidekiinnikkeisiä, loput mantookin jalkoihin.
NOA-peitetelineet on valmistettu eloksoiduista alumiiniputkista ja painevaletuista alumiinista liitososista. Veneeseen kiinnitettävät osat on valmistettu profiilista. Päät ovat suojattu muovitulpilla. Teline on kevyt ja mahtuu pieneen pakkaukseen ja on helposti muunneltavissa kun tarpeet muuttuvat. Erittäin helppo koota ja purkaa. Oikein koottuna aikaansaadaan erittäin tukeva rakenne joka ei riko pressua ja kestää kovatkin myrskyt.
SVEA-RAHOITUS
Rahoita isommat ostoksesi SVEA-kulutusluotolla. Luoton voit hakea jo etukäteen, kun tiedät mitä olet ostamassa. Rahoituksella ostaminen ei vaadi myymälään paikan päälle saapumista. Kaupoista voit sopia myös etänä myyjiemme kanssa, kun olet saanut luoton SVEA-hakemuksen kautta.
- Telineen pituus: 11m
- Tukijalkojen määrä valittavissa.
- Veneen maksimileveys: 4,2m
The NOA A-frame is designed for boats between 7 and 9.5 meters (22 and 31 feet) in length. The model has a total length of 8 to 10 meters and is built with telescopic A-legs that are placed in the ground at the bow and stern of the boat. The telescopic structure makes it easy to adjust the height of the frame as needed.
The brush tubes can be shortened or adjusted if they extend too far. For longer boats, the A-frame can be extended with additional brush tubes and deck legs. NOA also offers accessories such as cross supports, brackets and telescopic legs for additional stability.
Tip: Always choose a frame that is slightly longer than your boat. The brush tubes should not extend more than 30 cm over the bow or stern to prevent the tarpaulin from tearing.
Like all NOA products, the A-frame tarpaulin is made of high-quality anodized aluminum, making it lightweight, durable and corrosion-resistant. The structure provides reliable protection for your boat during winter storage and is easy to dismantle and store for the summer season.
Easy installation
The assembly begins by placing the rear pair of A-legs together with one of the ridge tubes. The frame is then built forward section by section, placing the legs at even intervals. If any ridge tube is too long, it can easily be cut or removed.
To ensure a smooth installation, it is a good idea to check all parts before starting – smaller pipes may be packed inside larger ones. A practical tip is to mark the parts with tape or a marker during the first installation, which will make assembly easier in the future.
Tips for smooth operation
Mark the center of the tarpaulin to make it easier to position it. If more than one person is involved in the installation, make sure each person has their own 8 mm Allen key. During disassembly in cold weather, it may be helpful to use two T-joints to give you a better grip on the brush tubes.
- Suitable for boats: 7–9.5 m (22–31 ft)
- Frame length: 8–10 m (5 × 2 m brush tubes)
- Legs: telescopic A-legs and deck legs, Ø30/35 mm
- Material: anodized aluminum
- Hex key: 8 mm (1 piece included)
Package contents
Box 1/2
- 5 × Brush tube 2 m (Ø35 mm)
- 4 × Cover leg Ø35/30 mm, 1.25 + 0.9 m
- 2 × Cover leg Ø35/30 mm, 1.25 + 1.5 m
- 4 × A-leg Ø35/30 mm, 2 + 2 m
- 2 × Cross support 1.5 m
- 4 × Joint lock with pipe
Box 2/2
- 10 × T-joint
- 1 × Allen key 8 mm
- 2 × End cap
- 10 × Plastic foot
- 4 × NOA bracket Ø30/35 mm
- 10 × Telescopic lock
A complete set of two NOA brackets and two end fittings that easily convert an existing pair of legs to be fixed to a railing with a plastic foot. Instead of the legs standing directly on the deck, this set allows them to be fixed to the 25 mm front or rear railing. The end fittings are installed by screwing or riveting (screws not included).
The delivery includes 2 end fittings and 2 NOA brackets with bolt and nut.
- Converter kit
- Perfect for one pair of feet
- NOA brackets
Anchor bracket for Bruce anchors for attaching top and bottom handrail tubes. Made of stainless, acid-resistant steel and aluminum.
- Anchor holder
- For railing and pipe mounting
- Manufacturer: Noa
- Manufacturer's product code: 10605
NOA A-racks offer unlimited possibilities to “customize” the right protective rack for sailboats and motorboats, because the A-legs and deck legs that come with the rack are telescopic legs, so the length can be easily adjusted to suit. The advantage of the A-rack is that the A-legs reduce the pressure caused by the wind against the boat, when the legs are directly on the ground. The deck legs can be placed against the edge of the railing, the cabin roof or another suitable place on the deck. Alternatively, they can also be placed on the seat trough, which ensures excellent balance. The A-rack is available in eight different lengths, from 5 meters to 12 meters. The A-rack is suitable for both sailboats and motorboats that do not have a bow or stern railing. The A-legs raise the protective cover so that air can circulate from the bow and stern, which ensures excellent ventilation. The inner tubes are 30mm and the outer tubes are 35mm and have plastic caps on the ends. The tubes are made of aluminum. The bolts and nuts are made of stainless steel.
NOA tarpaulin racks are made of anodized aluminum tubes and die-cast aluminum connectors. The parts that are attached to the boat are made of profile. The ends are protected with plastic plugs. The rack is lightweight and fits into a small package and is easily modified when needs change. Very easy to assemble and disassemble. When assembled correctly, a very sturdy structure is created that will not break the tarpaulin and can withstand even the strongest storms.
- Rack length: 8m
- Maximum length of A-leg (pictured A): 3.8m
- Stage width (pictured B): 1.5m
- Number of pairs of legs on the cover (pictured C): 2
Solar panel bracket for railing installation. The bracket can be adjusted lengthwise and at the desired angle towards the sun. For railings with 25mm pipe. Fits most panels. Length 650mm, can be cut to desired length. Weight 1.1kg. Material anodized aluminum.
- 25mm to the railing
- Fits most panels
- Length 650mm, can be cut
Swivel anchor davit. The structure allows the anchor to be lifted. Anodized aluminum. Suitable for anchors weighing up to 30 kg.
Includes railing bracket.
- Up to 30kg anchor
- Anodized aluminum
- Protruding part: 500mm
For fixing solar panel brackets in a fixed position. Installation on 25 mm pipe. Anodized aluminum. Supplied in pairs of 2 Noa brackets.
• Length: 650mm
• Width: 40mm
• Height: 12mm
• 25 mm pipe
NOA cover system accessory: pair of telescopic legs for the deck, length 1.5 - 2.3 meters.
- Telescopic 1.5-2.3 meters
- Aluminum
- Plugged ends
30mm aluminum tube from NOA.
- Aluminum tube
- Diameter: 30mm
- Length: 1.5m
Plastic NOA brand nut, made of black plastic.
• M8x20
• Made of black plastic
The rail foot connection turns the reel stand into an overhanging frame. This allows you to easily get the edge of the cover over the side and prevents water from accumulating against the reel.
- Mantook connection pair
- Fits Noa reel stand
- NOA product code: 10302
The NOA A-frame is designed for boats between 10 and 12.5 meters (32 and 41 feet) in length. The overall length of the model is 11 to 13 meters and it is built with telescopic A-legs that are placed in the ground at the bow and stern of the boat. The telescopic structure makes it easy to adjust the height of the frame as needed.
The brush tubes can be shortened or adjusted if they extend too far. For longer boats, the A-frame can be extended with additional brush tubes and deck legs. NOA also offers accessories such as cross supports, brackets and telescopic legs for additional stability.
Tip: Always choose a hull that is slightly longer than your boat. The spars should not extend more than 30 cm over the bow or stern to prevent the tarpaulin from tearing.
Like all NOA products, the A-frame tarpaulin is made of high-quality anodized aluminum, making it lightweight, durable and corrosion-resistant. The structure provides reliable protection for your boat during winter storage and is easy to dismantle and store for the summer season.
Easy installation
The assembly begins by placing the rear pair of A-legs together with one of the ridge tubes. The frame is then built forward section by section, placing the legs at even intervals. If any ridge tube is too long, it can easily be cut or removed.
To ensure a smooth installation, it is a good idea to check all parts before starting – smaller pipes may be packed inside larger ones. A practical tip is to mark the parts with tape or a marker during the first installation, which will make assembly easier in the future.
Tips for smooth operation
Mark the center of the tarpaulin to make it easier to position it. If more than one person is involved in the installation, make sure each person has their own 8 mm Allen key. During disassembly in cold weather, it may be helpful to use two T-joints to give you a better grip on the brush tubes.
- Suitable for boats: 10-12.5 m (32-41 ft)
- Frame length: 11-13 m (4 × 2 m + 2 x 2.5m brush tubes)
- Legs: telescopic A-legs and deck legs, Ø30/35 mm
- Material: anodized aluminum
- Hex key: 8 mm (1 piece included)
Package contents
Box 1/2
- 3 × Brush tube 2 m (Ø35 mm)
- 2 x Brush tube 2.5m (Ø35 mm)
- 2 × Cover leg Ø35/30 mm, 1.25 + 0.9 m
- 4 × Cover leg Ø35/30 mm, 1.25 + 1.5 m
- 4 × A-leg Ø35/30 mm, 2.5 + 2.5 m
- 2 × Cross support 2.5 m
- 5 × Connection lock with tube
Box 2/2
- 10 × T-joint
- 1 × Allen key 8 mm
- 2 × End cap
- 10 × Plastic foot
- 4 × NOA bracket Ø30/35 mm
- 10 × Telescopic lock
Reversible solar panel holder for vertical or horizontal installation on a pipe. Includes 25mm NOA bracket. Length 650 mm, transverse aluminum pipe 600 mm, 30 mm vertical post 1800 mm. Longer aluminum profiles can be ordered.
- To the railing: 25mm
- Length: 650mm
- Column: 1800mm
