Quick

Quickin 20 litre hot water tank. The outer shell is made of composite, while the inner tank is made of stainless steel (1.5 mm Aisi 316). The hot water tank is highly corrosion resistant, as the heat exchanger is also made of stainless steel. The heat exchange is also very efficient due to the large exchange area, which offers a higher capacity than many other hot water tanks on the market. In addition, there is a dense, high-density polyurethane foam insulation between the outer shell and the tank, which insulates the tank effectively.

This water heater provides both fast water heating and good heat retention. The water can be heated either by the engine cooling system or by an electric heating element. The heating element has a power of 800 W and operates on 220 V, which is connected to shore power.

The hot water heater is equipped with an adjustable resistance thermostat and an overpressure valve. It can be mounted on both the wall and the floor using the brackets provided – vertically or horizontally – providing great flexibility in installation options. Only high-quality materials have been used in the manufacture, and the heater is made to last for many years on your boat.

Delivery includes power cord and mounting brackets. Can be completed with a thermostatic mixer - see accessories.

Comes with relay and mounting screws. It must be completed with the following:

• Fuse 80A
• Control panel
• Power cables
• Anchor/chain/roller
• Remote control (optional)

Complete package with Quick's bow thruster

The package includes:

• Bow thruster with fiberglass tunnel
• Joystick with 6 meter cable
• Fuse holder with fuse

Quickin 40 liter hot water tank. The outer shell is made of composite, while the inner tank is made of stainless steel (1.5 mm Aisi 316). The hot water tank is highly corrosion-resistant, as the heat exchanger is also made of stainless steel. The heat exchange is also very efficient due to the large exchange area, which offers a higher capacity than many other hot water tanks on the market. In addition, there is a dense, high-density polyurethane foam insulation between the outer shell and the tank, which insulates the tank effectively.

This water heater provides both fast water heating and good heat retention. The water can be heated either by the engine cooling system or by an electric heating element. The heating element has a power of 1200 W and operates on 220 V, which is connected to shore power.

The hot water heater is equipped with an adjustable resistance thermostat and an overpressure valve. It can be mounted on both the wall and the floor using the brackets provided – vertically or horizontally – providing great flexibility in installation options. Only high-quality materials have been used in the manufacture, and the heater is made to last for many years on your boat.

Delivery includes power cord and mounting brackets. Can be completed with a thermostatic mixer - see accessories.

Quickin 30 liter hot water tank. The outer shell is made of composite, while the inner tank is made of stainless steel (1.5 mm Aisi 316). The hot water tank is highly corrosion-resistant, as the heat exchanger is also made of stainless steel. The heat exchange is also very efficient due to the large exchange area, which offers a higher capacity than many other hot water tanks on the market. In addition, there is a dense, high-density polyurethane foam insulation between the outer shell and the tank, which insulates the tank effectively.

This water heater provides both fast water heating and good heat retention. The water can be heated either by the engine cooling system or by an electric heating element. The heating element has a power of 1200 W and operates on 220 V, which is connected to shore power.

The hot water heater is equipped with an adjustable resistance thermostat and an overpressure valve. It can be mounted on both the wall and the floor using the brackets provided – vertically or horizontally – providing great flexibility in installation options. Only high-quality materials have been used in the manufacture, and the heater is made to last for many years on your boat.

Delivery includes power cord and mounting brackets. Can be completed with a thermostatic mixer - see accessories.

Quick Balder XS600 anchor winch

Quick anchor winch package. The winch is intended to be mounted inside the transom, but it can also be mounted in other locations, as the angle of the motor can be adjusted in 45 degree increments. This means that the installation is flexible. The winch motor is available in X and Y versions, which means that the rope sheave (pulley) is located on the left or right side of the motor – when viewed from the back of the boat, for example from the swim platform. This package includes the X version, where the rope sheave is on the left side of the motor. When installing, you must ensure sufficient space both next to the rope sheave and under the motor. This will determine which version best suits your boat, regardless of which side the winch is installed on.

• Model: Quick Balder XS600 (600 W)
• X version with pulley on the left side of the engine
• Recommended boat length: 6–10 meters
• For lead core rope 12–14 mm

The anchor winch has a free-fall function that quickly releases the anchor and allows it to run freely until it is stopped. This prevents the boat from drifting away while anchoring (the function can be switched off if desired).

Package contents:

• Relay
• Bracket (transom bracket)
• Control panel
• Fuse
• Automatic stop
• Available as accessories (see accessories):
• Cable set
• Anchor/rope/reel
• Remote control (optional)

Thermostatic mixer for Quick hot water heater. Mixes cold water with hot water from the heater.

Quick electric heater – original spare part. The heater heats the water in the water heater with 220V. It works with shore power when the engine is unable to heat the water.

Quick anchor winch package

Package includes:

• Relay
• Bracket (for transom)
• Control panel
• Fuse
• Hitchhiking

Can be supplemented with the following:

• Cable set
• Anchor/rope/roller
• Remote control

Specifications:

• Voltage: 12V
• Motor power: 600W
• Chain size: 12-14mm
• Recommended boat length: 6-10 meters
• Maximum load: 200 kg
• Maximum speed: 25-28 m/min
• Weight: 12.4 kg
• Recommended fuse: 60A

Supplied with relay and mounting screws, but needs to be supplemented with the following:

• Fuse 100A
• Control panel
• Power cables
• Anchor/chain/reel
• Remote control (optional)

Specifications:

• Voltage: 12V
• Motor power: 1500W
• Maximum load: 470kg
• Maximum speed: 39.2 m/min
• Weight: 20.4 kg
• Recommended fuse: 100A

Quickin 25 liter hot water tank. The outer shell is made of composite, while the inner tank is made of stainless steel (1.5 mm Aisi 316). The hot water tank is highly corrosion-resistant, as the heat exchanger is also made of stainless steel. The heat exchange is also very efficient due to the large exchange area, which offers a higher capacity than many other hot water tanks on the market. In addition, there is a dense, high-density polyurethane foam insulation between the outer shell and the tank, which insulates the tank effectively.

This water heater provides both fast water heating and good heat retention. The water can be heated either by the engine cooling system or by an electric heating element. The heating element has a power of 1200 W and operates on 220 V, which is connected to shore power.

The hot water heater is equipped with an adjustable resistance thermostat and an overpressure valve. It can be mounted on both the wall and the floor using the brackets provided – vertically or horizontally – providing great flexibility in installation options. Only high-quality materials have been used in the manufacture, and the heater is made to last for many years on your boat.

Delivery includes power cord and mounting brackets. Can be completed with a thermostatic mixer - see accessories.

Quick's water heater thermostat. Ensures that the electric heater keeps the water at the right temperature.

Anchor windlass package from Quick. The anchor windlass is intended to be mounted inside the transom, but it can also be mounted elsewhere, as the engine can be tilted in 45 degree steps. Installation is flexible. The anchor windlass comes in X and Y models, which means the sheave is on the right or left side of the engine - considering that the winch is mounted on the transom. This package includes the X model, where the sheave is on the left side of the engine. When installing, there must be plenty of space next to the sheave and under the engine, which determines the best model for your boat, regardless of which side you install the anchor windlass.

Model: Quick Balder XS900 (900W)

X model, pulley on the left of the engine

Recommended boat length: 9-12 meters

Lead rope size: 12-14 mm

The anchor windlass has a free-fall function that quickly releases the anchor and allows it to move freely until it stops, preventing the boat from moving away from the anchorage (can be switched off if necessary).

The package is delivered including:

Relay

Mounting foot (transom mounting)

Control panel

Fuse

Automatic stop

Can be supplemented with the following (see accessories):

Cable set

Anchor/rope/roller head

Remote control (optional)

See pictures for dimensions.