Seldén
Seldén group products
/selden-vanttiruuvi-516-067875c25a66f3.)
Chrome-plated aluminium bronze turnbuckles. Bronze, like acid-resistant stainless steel, has very high corrosion resistance and strength. Using an aluminium bronze center part for the turnbuckles reduces the risk of the turnbuckle threads breaking under high loads. All this is done to give you a more functional product with a longer service life.
Breaking strength: 3352: 2450 kg
Length: 233-342mm
For 6mm Wires
• High corrosion resistance
/230568ad53e7f0119.jpg)
/selden-vanttiruuvioljy-100ml-067875c30c098d.jpg)
- For threads in turnbuckles
- Lubricate in spring and autumn
- 100ml
/selden-vanttiruuvi-58-067875c4995c6a.jpg)
Chrome-plated aluminium bronze turnbuckles. Bronze, like acid-resistant stainless steel, has very high corrosion resistance and strength. Using an aluminium bronze center part for turnbuckles reduces the risk of the turnbuckle threads breaking under high loads. All this is done to give you a more functional product with a longer service life.
- Aluminum bronze
- 5/8'
- Length min. 318mm
- Length max. 466mm
/selden-rikipultti-8x28mm-067875c27f19eb.)
A turnbuckle locking pin made of stainless steel. The length is measured from the bottom of the head to the beginning of the hole in the scissor surface.
/selden-vanttiruuvi-716-067875c25a7fbb.)
Chrome-plated aluminium bronze turnbuckles. Bronze, like acid-resistant stainless steel, has very high corrosion resistance and strength. Using an aluminium bronze turnbuckle core reduces the risk of the turnbuckle threads breaking under high loads. All this is done to give you a more functional product with a longer service life.
- Aluminum bronze
- Breaking strength: 3356: 4750kg.
/507306ad23bca67368.jpg)
An efficient winch designed to handle line without filling the whole drum. The drum and self-tailing groove are built to make recovering sheet slack easy. The line runs out smoothly and safely, and the drum performs reliably even in extreme conditions.
ART — Asymmetric Rib Technology: Selden's manual winch drums are forged, machined and hard-anodised aluminium with vertical ribs spaced asymmetrically relative to each other. With symmetrical spacing the line would leave the drum in jerks; the asymmetric spacing gives good grip and a smooth, even payout.
The spring-loaded self-tailing function holds the line securely without jamming, and the handle can already be in place when you take up slack — no time wasted looking for it during a tack or gybe.
Technical data (model S30): base diameter ø139mm, height 150mm, weight 2.9kg, line size ø8-12mm, gearing 12:1/30:1, max working load 8.4kN.
- Manual winch, model S30
- ART – Asymmetric Rib Technology
- Self-tailing function
- Max working load: 8.4kN
/vinsch-selden-s60-st-alu-06aa3df9ee572a.webp)
An efficient winch designed to handle line without filling the whole drum. The drum and self-tailing groove are built to make recovering sheet slack easy. The line runs out smoothly and safely, and the drum performs reliably even in extreme conditions.
ART — Asymmetric Rib Technology: Selden's manual winch drums are forged, machined and hard-anodised aluminium with vertical ribs spaced asymmetrically relative to each other. With symmetrical spacing the line would leave the drum in jerks; the asymmetric spacing gives good grip and a smooth, even payout.
The spring-loaded self-tailing function holds the line securely without jamming, and the handle can already be in place when you take up slack — no time wasted looking for it during a tack or gybe.
Technical data (model S60): base diameter ø245mm, height 239mm, weight 13kg, line size ø8-16mm, gearing 18:1/60:1, max working load 16.8kN.
- Manual winch, model S60
- ART – Asymmetric Rib Technology
- Self-tailing function
- Max working load: 16.8kN
/selden-koysiohjain-kaiteeseen-tupla-067875c446ebe4.jpg)
The Seldén "Double Fairlead" makes it easy to install the steering line on the gennaker furling system in a way that minimizes friction and facilitates furling. As a gennaker or Code 0 furling system is always used with a spliced, endless steering line, standard blocks cannot be used to guide the line back. The Seldén "Double Fairlead" consists of a composite clamp that is mounted on a 25mm or 30mm manteau post, and a spring-loaded stainless steel bow that is pressed in and twisted to open the clamp.
- Min tube: 25mm
- Max tube: 30mm
/selden-vanttiruuvi-38-067875c25a7530.)
Chrome-plated aluminium bronze turnbuckles. Bronze, like acid-resistant stainless steel, has very high corrosion resistance and strength. Using an aluminium bronze turnbuckle core reduces the risk of the turnbuckle threads breaking under high loads.
/selden-vanttiruuvi-12-067875c25a8d2e.)
Chrome-plated aluminium bronze turnbuckles. Bronze, like acid-resistant stainless steel, has very high corrosion resistance and strength. Using an aluminium bronze turnbuckle core reduces the risk of the turnbuckle threads breaking under high loads.
/selden-psu-power-supply-06ad233cd07cf0.webp)
Designed specifically to work with Selden's SEL-Bus system, and typically mounted near the battery compartment or electrical panel. You'll also need a control unit (e.g. item 26656) to operate the winch.
- Selden PSU power supply
- Converts 12/24V to 42V
- Required component for the E40i electric winch
- Also requires a control unit (26656)
/vinschhandtag-race-255mm-06aa3de72e1ed7.webp)
A sturdy aluminium crank arm and a low-friction palm cup make it comfortable to use even on long passages and under heavy load. Length 255mm (10"), a standard size that fits most winches.
- Selden Race GRIP winch handle
- Patented side-lock mechanism
- Quick to fit and remove
- Length 255mm (10")
/selden-yksinkertainen-ploki-8mm-067875c27d0fcc.)
- Single block
- On a fixed link
- Suitable for 8 and 10 mm rope
/vinsch-selden-e40i-alu-06aa3db94216c3.webp)
The E40i has a built-in motor — no separate motor under the coachroof or behind the coaming — and three speeds. Aluminium body.
E40i runs on Selden's SEL-Bus system and a power supply that converts the boat's 12/24V to the 42V the winch needs (power supply sold separately, item 26655). Combined with Selden's electric furling masts, E40i forms the "Synchronised Main Furling" system: press the furl button on the mast and E40i takes in the outhaul simultaneously — one button handles the whole furling sequence smoothly and safely.
Also requires a control unit (item 26656) to operate. Recommended fuse: 60A/24V or 100A/12V.
- Selden E40i, built-in electric motor
- Mounts directly on deck, no space needed below
- 3 speeds, aluminium body
- Requires a power supply (26655) and control unit (26656)
/vinsch-selden-e40rev-alu-06aa3dd7ce6e6c.webp)
The winch is designed to ease sailing, especially for short-handed crews who need to trim quickly alone or with just two people. The design is built around Selden's patented ART drum (Asymmetric Rib Technology), which gives reliable grip and smooth line feed. In a power failure the winch can still be operated manually with a handle.
Runs on Selden's SEL-Bus system; the SEL-Bus control unit and voltage converter are sold separately (e.g. item 26657).
- Selden E40Rev, reversible electric winch
- ART drum (Asymmetric Rib Technology)
- Two speeds and two directions
- Can also be operated manually in a power failure
/adapterplatta-for-s40-vinsch-06aa3dfd43013d.webp)
Made from hard-anodised aluminium, sized to match the corresponding winch model. Especially useful when upgrading an old winch to a more powerful model whose bolt pattern doesn't match the original holes.
Model: S40, thickness 9mm.
• Model: S40
• Thickness: 9mm
• No new holes in the deck
/selden-rikipultti-19mm-rst-4kpl-067875c27c5931.)
Turnbuckle locking pin made of stainless steel. The length is measured from the bottom of the head to the beginning of the hole in the scissor surface. The package contains 4 turnbuckles.
/selden-nostimen-ohjuri-5-10mm-06a6afbe140944.)
- Height: 34mm
- Width: 42mm
- Depth: 22mm
/selden-vanttiruuvinsuoja-12-067875c27e608b.)
• Two-piece top cap
• 1/2' turnbuckle
/selden-rikipultti-10x30mm-067875c2800f43.)
A turnbuckle locking pin made of stainless steel. The length is measured from the bottom of the head to the beginning of the hole in the scissor surface.
