Spinlock

Includes UM trigger and 33g CO2 cartridge. Complete charging kit for 150-170N buoyancy inflatable lifejackets

Both parts should be replaced if the lifejacket is inflated. If the lifejacket has not been triggered, the 33gr CO2 cartridge has no expiration date, but the black United Moulders (UM) trigger should be replaced according to the expiration date printed on the side of the cartridge. We recommend that you always have one extra charging set on the boat, so that you can replace the lifejacket with new parts when necessary. The packaging is hermetically sealed, so no moisture can accumulate in it.

Also suitable for inflatable lifejackets from other manufacturers (such as Baltic) that use a United Moulders trigger and have a buoyancy of 150, 165 or 170 newtons.

• Lightweight, discreet and comfortable design
• Automatically inflates life jacket when in contact with water (does not inflate from rainwater)
• Easy to wear
• Crotch strap with recessed buckle
• Chest bag attachment option
• Optional Pylon Light™ – water-activated high-intensity flashing LED light
• Optional Lume-On™ light
• Easily converted to manual release with a conversion kit
• Reloading requires the Spinlock DW-RAK re-calibration kit.

• Automatically fills when in contact with water. United Moulders Pro Elite trigger.
• Corrosion-resistant 33gr refill bottle. The bottle does not become rough over time and thus the lung is not worn out by the friction of the bottle.
• Two life jacket lights installed. Lume-On flashing light and Pylon life jacket light.
• New model Sprayhood installed.
• A whistle attached to the life jacket inflation tube. It comes out in front of your face when the life jacket is inflated.
• Shapely and padded straps.
• Manual handle-style trigger cord.
• Inspection window.
• Visible lifting eye for helicopter lifting.
• Tension adjustment also on the back.
• Dyneema loop for attaching to a safety harness.
• Includes a 40mm wide crotch strap.
• Plenty of tightening and adjustment options for optimal fit.

• United Moulders Pro Sensor Elite trigger
• 33gr life jacket refill bottle

A lightweight and compact inflatable life jacket with a safety harness that is unnoticeable on the body. The automatic United Moulders release mechanism inflates the vest in about three seconds when the vest comes into contact with water. In addition, the vest has a release cord that can be used to inflate the vest manually. The vest is closed with a zipper that tears open when the vest is inflated. The zipper can be closed again when it is reloaded. A crotch strap is included, the fastening buckle of which is partially recessed inside the vest so that it does not easily catch on external objects. The vest is put on by placing it over the head and fastening it at the sides. An excellent vest for both motorboating and cruising.

FEATURES:

• Lightweight, discreet and comfortable design
• Deckvest Lite + includes an integrated safety harness and a safety rope attachment loop
  
• Automatically inflates life jacket when in contact with water (does not inflate from rainwater)
• Easy to wear
• Crotch strap with recessed buckle
• Chest bag attachment option
• Optional Pylon Light™ – water-activated high-intensity flashing LED light
• Optional Lume-On™ light
• Easily converted to manual release with a conversion kit
• Reloading requires the Spinlock DW-RAK re-calibration kit.

The Deckvest VITO ASF 170N is a top-class lifejacket designed for offshore sailing, developed in collaboration with Volvo Ocean Race sailors in the world's most demanding conditions. The vest meets all the inspection requirements of the offshore race, and the goal has been to create a vest that professionals really want to wear - lightweight, comfortable and extremely safe.

The new Vito features a completely new Advanced Flotation System (AFS), which places the buoyancy force in just the right place, improving stability, visibility and position in the water. The three-dimensional structure fits tightly against the body and makes the vest comfortable to wear even on long trips.

The vest comes standard with the HRS emergency release system, Pylon™ light and Lume-On™ lighting for improved safety in the dark. The reliable Hammar® hydrostatic release system is activated only by water pressure, and the 170 newton buoyancy ensures excellent support in the water.

Spinlock VITO AFS – the choice of professionals, bringing ocean-level safety to all water users.

Hammar® hydrostatic automatic release system

The Hammar® release system is only activated by water pressure when the life jacket is approximately 10cm below the water surface. The system is ideal for extreme conditions and open sea sailing. The advantage of the Hammar® system is that it is not activated by rain or other water splashes. Delayed release may be due to the life jacket's release mechanism not getting wet properly, for example if there are a lot of floating clothes on the road.

HRS release system

Spinlock's Deckvest VITO AFS lifejackets feature a harness release system (HRS). This system includes a soft loop to which the harness is attached. In an emergency, the user can release themselves from the harness quickly and safely.

• Activation handle is located behind a soft loop – easy to find, grab and pull
• Soft loop fastening releases and opens
• The user becomes detached from the safety harness and the boat
• Easily restored to use again
• ISO12402-1 certified safety harness

What is HRS?

Spinlock still considers the safety belt cutter to be an important piece of equipment. However, a reliable and consistent safety belt quick release mechanism has not yet been developed. Instead, Spinlock has focused on developing a vest safety belt release system. Tests have shown that this system must be:

• Simple to understand
• Easy to use
• Easy to maintain
• Durable and reliable throughout the life of the life jacket
• At the same time, the system must meet the requirements of ISO12402 approval.

Staying attached to the boat is always safer than falling into the water, and the use of a safety harness is strongly recommended. However, if a person falls into the water, they may end up hanging over the side or stern of the boat, which can be a dangerous and difficult situation to control. The HRS system allows for a quick release in such an emergency.

Certificates:

• CE approved
• ISO 12402-3 Lifejacket (170N)
• ISO 12401 Deck Harness
• Pylon Light ISO 12402-8
• Spray hood ISO 12402-8

2m long elastic safety rope with two hooks with a large opening and a loop. The loop is attached to the vest, and with the help of two hooks you can move around the boat while being attached at all times. Spinlock safety ropes are up to 50% lighter than standard safety straps and the locking mechanism of the Performance attachment hooks can be opened and closed with one hand.

Lifelines with two hooks + loop or three hooks meet the following regulations: " Are both compliant with section 5.02.2 of the Offshore Special Regulations. ALL crew members to have a tether with 3 points of attachment, for category 0,1,2 & 3 races".

The ideal sailing vest for light and keelboat sailors. Also excellent for other small boats and water sports. The thin buoyancy vest has been developed for the demands of the new generation.

• Discreet cut, fit that reduces the risk of catching

• Tapered cut for increased mobility
• Designed for a snug fit, reducing resistance
• 'GRIP' pattern on the inside, which prevents the vest from riding up on the shoulders
• Zipper on the side
• Flexible outer pocket, plus an inner security pocket
• Water-repellent side panels that reduce water absorption into the product

• XS 25-40kg: lift 35N
• S 40-60kg: lift 40N
• M 60-70kg: lift 45N
• L 70+kg: lift 50N
• XL 70++kg: lift 50N

Designed for all types of water sports, Alto is a lightweight and compact inflatable flotation device that is worn around the waist. ALTO is manually deployed from a waist pack and is carried under the arms and around the chest. ALTO is suitable for paddlers, fishermen and small boaters, among others, as it is easy, simple, discreet and comfortable to use, while still being certified as a 50 Newton flotation device.

Thin, highly flexible knee pads adapt to the movements of the leg and stay in place. Neoprene padding provides support and protection. Good grip in all conditions. Three sizes.

• Small: 34-42cm
• Medium: 40-48cm
• Large: 46-56cm
  
  
  

A 55L bag made of durable and lightweight ripstop fabric, suitable as a flight bag. Removable backpack straps and carrying handles.

Includes UM Elite trigger and 33g CO2 cartridge. Complete charging kit for 150-170N buoyancy inflatable lifejackets

Both parts should be replaced if the lifejacket is inflated. If the lifejacket has not been triggered, the 33gr CO2 cartridge has no expiration date, but the grey United Moulders (UM) trigger should be replaced according to the expiration date printed on the side of the cartridge. We recommend that you always have one extra charging set on the boat, so that you can replace the lifejacket with new parts when necessary. The packaging is hermetically sealed, so no moisture can accumulate in it.

Also suitable for inflatable lifejackets from other manufacturers (such as Baltic) that use the United Moulders Elite trigger and have a buoyancy of 150, 165 or 170 newtons.

The ideal sailing vest for light and keelboat sailors. Also excellent for other small boats and water sports. The thin buoyancy vest has been developed for the demands of the new generation.

• Discreet cut, fit that reduces the risk of catching
• Tapered cut for increased mobility
• Designed for a snug fit, reducing resistance
• 'GRIP' pattern on the inside, which prevents the vest from riding up on the shoulders
• Zipper on the side
• Flexible outer pocket, plus an inner security pocket
• Water-repellent side panels that reduce water absorption into the product

• 
  SIZES:
  XS 25-40kg: lift 35N
• S 40-60kg: lift 40N
• M 60-70kg: lift 45N
• L 70+kg: lift 50N
• XL 70++kg: lift 50N