TruDesign

Durable and lightweight composite skin fittings are designed and manufactured in New Zealand. No corrosion, no oxidation and no electrical leakage. Can be used with all boat building materials such as; steel, aluminum, fiberglass, plastic, etc. Certified (IMCI) to ISO 9093-2.

Straight hose connector, black composite.

Grommet with hose connection made of composite (reinforced nylon) for use above the waterline. Suitable for all types of hulls, aluminum, steel, wood, fiberglass, etc. The material is very strong and light. The material also cannot rust. Resistant to chemicals and can withstand diesel, gasoline, solvents, etc. UV resistant.
Long hose nozzle with space for 2 hose clamps.

Composite (reinforced nylon) grommet suitable for use both below and above the waterline. When installed below the waterline, the TruDesign ball valve must be installed directly in the grommet. Suitable for all types of hulls, aluminum, steel, wood, fiberglass, etc. The material is very strong and lightweight. The material also cannot rust. Chemical resistant and resistant to diesel, gasoline, solvents, etc. UV resistant.
A plug-in ball valve requires 70% of the thread of the feedthrough to be installed correctly.
Use Sikaflex 292 or 591 to seal the penetration.

Hose connector for connecting hoses of different sizes. Made of composite (reinforced nylon). The material is very strong and light. The material also cannot rust. Resistant to chemicals and withstands diesel, petrol, solvents, etc. UV resistant.
Space for double hose clamps on both sides.

TruDesign check valve. Made of glass fiber reinforced polymer composite, spring is made of stainless steel. Very little pressure is required to open the valve. Minimum flow rate limitation. Simple installation with marking on the check valve indicating which direction the flow is. It is recommended to put a filter in the incoming water to prevent dirt from getting stuck in the check valve.

Grey plastic. For fitting hoses of different diameters. Cut with a hacksaw.

Hose elbow 90° made of composite (reinforced nylon). The material is very strong and light. The material also cannot rust. Resistant to chemicals and resistant to diesel, petrol, solvents, etc. UV-resistant.
Plenty of space for double hose clamps.
Temperature range: -20°C - +110°C.

Three-way valve for flushing a septic tank or an outboard motor. Very high quality and very easy to install. The valve is supplied without connections, complete with connections that allow for the easiest installation. Made of glass fiber reinforced polymer composite.

Includes wrench - Avoid using regular pipe wrenches as they can damage the joints.
Color: White
R-thread: 1 1/2"

Straight hose connector with internal thread, made of composite. Suitable for use both above and below the water surface. The material is extremely strong and light. The material is also not subject to corrosion. Chemical resistant and resistant to diesel, petrol, solvents, etc. UV resistant. The hose connector has space for two hose tighteners. Withstands temperatures between -40°C and +110°C.

Angle connector 90° with external and internal threads, black.

Vented Loop 19mm

Straight hose connector for TrueDesign three-way faucet, white composite.

Designed for harsh marine and agricultural environments, among others, TruDesign check valves are made of UV-stabilized, glass-reinforced nylon. They can be installed in-line to prevent water backflow or sloshing, and have an extremely low burst pressure.

Reducing nipple for 32-25mm hoses.