Vetus
Vetus -ryhmän tuotteet
- Length: 424mm
- Width: 424mm
- Internal dimensions: 374x374mm
Designed specifically for boats. Suitable for ceiling or wall mounting. Equipped with a long-life computer fan motor. Very low energy consumption and noise level.
- Voltage (V): 12
- Fan type: Electric
- Airflow capacity (m³/min): 1.2
- Static pressure: 6 mm H2O
- Length: 424mm
- Width: 424mm
- Internal dimensions: 374x374mm
Vetus exhaust hose with an inner diameter of 51mm. Metric product.
- Diameter 51mm
Vetus ILT is an innovative inspection hatch with a durable design. It is equipped with a ring-shaped fitting structure and makes it easy to open, inspect and clean the tank, even if the hatch has been closed for a long time.
The inspection hatch has a counter piece and a rubber seal and is installed in the Ø 159 mm hole in the tank. When installing, the inspection hatch is simply placed in the frame hole and tightened with 4 screws, which expand the rubber seal and ensure a perfect seal.
- Height from tank surface: 40 mm
- Maximum diameter: 190 mm
- Hole: 159 mm
- Durable design
- Easy installation
- Hole size 159mm
Dimensions: Height 45mm. Corner radius: 55mm.
- Seawater-resistant aluminum
- Smoke grey acrylic glass
- 50x50cm
Altus is a low profile hatch that is only 21mm high. ALTUS hatches are well suited for sailing on the open sea.
ALTUS hatches have a completely new type of hatch holder, which is easier to use compared to older traditional holders. The hatch can be held open at almost any angle up to 90°.
The handles are equipped with a patented locking mechanism and have a practical ventilation position. The hatch can be locked from the inside and can also be opened from the outside. When closed and locked, the hatch is completely waterproof.
The cover frame is made of polished and anodized aluminum and features 10 mm thick acrylic glass with a sophisticated dark shade.
Specifications
- Model: ALT5151SL
- Material: Aluminum
- External dimensions (LxW): 581 x 518mm
- Cutting dimensions (CxD): 507 x 507mm
- Number of handles: 2pcs
- Acrylic glass thickness: 10mm
- Seawater-resistant aluminum
- Smoke grey acrylic glass
- 51x51 cm
Original Vetus fuel filter. Vetus product code STM3690.
- Vetus original part
- Fuel filter STM3690
- Compatible engines:
- 11–42 hp: M2, M3, M4.15, M4.17, M435, M445, M4.55, M456
- 65 hp & 80 hp: VH4.65, VH4.80
- P series: P417, P4.19, P4.21, P4.25, P4.28
- Vetus Deutz: DT4.70, DT4.85
ZWBH seals have been developed for use with water lubricated shaft assemblies. This updated monoblock design operates in the same way as the well-proven ZWB seals, but features an additional lip seal (three in total, i.e. triple lip seal) for added safety. The shaft seal has minimal friction, a 10mm vulcanized hose piece for the water pump and is oil and grease resistant.
VETUS recommends annual lubrication with silicone grease to maintain the seal in optimal condition. ZWBH seals are temperature resistant from -15° C to +85° C and are suitable for VETUS coulter tubes in bronze, steel or reinforced plastic. The set is supplied with grease and two stainless steel hose clamps. Flexible to absorb shocks and vibrations.
For 25mm axle
Height: 112mm
Length: 144mm
Width: 43mm
Shaft diameter: 25mm
- Absorbs shocks and vibrations
- Triple lip seal
- For shaft diameter 25mm
ALTUS hatches have a completely new type of hatch holder, which is easier to use compared to traditional holders. The hatch can be held open at almost any angle up to 90°.
The handles are equipped with a patented locking mechanism and have a practical ventilation position. The hatch can be locked from the inside regardless of its position, and if it is not locked, it can of course be easily opened from the outside. When closed and locked, the hatch is completely waterproof.
The cover frame is made of polished and anodized aluminum and features 10 mm thick acrylic glass in a dark shade.
Specifications:
- Model: ALT6363SL
- Material: Aluminum
- External dimensions (LxW): 701 x 701mm
- Cutting dimensions (CxD): 627 x 627mm
- Number of handles: 2pcs
- Acrylic glass thickness: 10mm
- Seawater-resistant aluminum
- Smoke grey acrylic glass
- 63x63mm
ZWBH seals are designed for use with water lubricated shaft assemblies. This updated monoblock design performs in the same way as the well-tested ZWB seals, but with the addition of an additional lip seal (three in total) for added safety. The shaft seal has minimal friction, a 10 mm vulcanized hose piece for water pumping and is oil and grease resistant.
VETUS recommends annual lubrication with silicone grease to maintain the seal in optimal condition. The ZWBH seals are temperature resistant from -15 °C to +85 °C and are suitable for VETUS coulter tubes in bronze, steel or reinforced plastic. The set is supplied with grease and two stainless steel hose clamps.
Flexible for absorbing shocks and vibrations.
Triple lip seal keeps water out.
For 35mm axle
Height: 112mm
Length: 145mm
Width: 56mm
Shaft diameter: 35mm
- Absorbs shocks and vibrations
- Triple lip seal
- For shaft diameter 35 mm
Vetus impeller and seals for M2, M3 and M4 model engines.
- Impeller + seals
- Compatible motors: M3.10/4.14/M2/M3/M4
- Vetus product code: STM8076
Vetus cover and o-ring for 330 series filters
Vetus seawater filter. Housing made of polypropylene, filter made of HD polyethylene and cover made of transparent styrene/acrylonitrile (SAN).
Aluminum inner frame.
- Fits hatch: No. 2271
ZWBH seals are designed for use with water lubricated shafts. This updated monoblock design operates in the same way as the well proven ZWB seals, but with the addition of an extra lip seal (three in total, i.e. triple lip seal) for added safety. The shaft seal has minimal friction, a 10mm vulcanized hose piece for water pumping and is oil and grease resistant.
VETUS recommends annual lubrication with silicone grease to maintain the seal in optimal condition. The ZWBH seals are temperature resistant from -15 °C to +85 °C and are suitable for VETUS coulter pipes - bronze, steel or reinforced plastic. The set is supplied with grease and two stainless steel hose clamps.
Flexible for absorbing shocks and vibrations.
Triple lip seal keeps water out.
For 30mm axle
Height: 112mm
Length: 144mm
Width: 49.5mm
Shaft diameter: 30mm
- Absorbs shocks and vibrations
- Triple lip seal
- For shaft diameter 30mm
Vetus seawater filter. Housing made of polypropylene, filter made of HD polyethylene and cover made of transparent styrene/acrylonitrile (SAN).
Original oil filter for Vetus engines. Vetus product code STM0051.
- Vetus original part
- Oil filter STM0051
- Compatible engines:
- 11–42 hp M2, M3, M4.15, M4.17, M435, M445, M4.55, M456
