Whale
Whale -ryhmän tuotteet
- No need for a separate switch
- Automatic elevation sensor
- Suitable for fresh and salt water use
- Mercury free
- Low power consumption
- Small and narrow, suitable for tight spaces
- Hose outlet horizontal or vertical
- Protected electronics
- The pump has long cables and a rotating outlet pipe for easy installation.
- Water intake point below
- Easy to install
- Easy to clean, no tools required to open
- CE certified
- Voltage: 12V
- Consumption: 3.4 amps
- Capacity directly: 40L/min
- Capacity at one meter head: 34L/min
- Connections: 19/25mm
- Size: 75 x 54 x 212mm (W x H x D)
- Weight: 0.35 kg
The pump is available with both right- and left-hand hose connections.
- Capacity: 9L/min
- Maximum lift: 2 meters
- Suitable hose: Ø 13 mm
- Height: 116mm
- Width: 92mm
- Pedal length: 104 mm
- Pedal height: 76 mm
- Weight: 700 grams
The Whales Babyfoot is a self-priming foot pump designed for easy installation in tight spaces and use. Its angled top makes it comfortable to use. Perfect as a pre-pump or in a simple freshwater system on a boat.
Capacity: Up to 8L/min
Hose connection: 13mm (½”)
Weight: 0.3 kg
- Up to 8l/min
- Hose connection 13mm
- Self-priming foot pump
Durable check valve that can be used with manual or electric pumps. Prevents water from flowing back when the pump stops. Hose sizes, 25mm (1") / 38mm (1 1/2"). Made of polypropylene and valves made of nitrile.
- Durable check valve
- Made of polypropylene
- 25mm and 38mm
When the water tap is opened, the valve starts the pump and turns it off when the tap is closed.
Hose connection: 13mm
Power consumption:
10 A at 12 V
5 A at 24 V
Maximum pressure: 2 bar (30 psi)
Built-in check valve
The valve must be installed vertically.
- Hose connection: 13mm
- Built-in check valve
- For bilge pump
The product is available in different packages:
- Complete shower set without cover
- Complete shower set with lid
- Shower head as a spare part
- Shower hose length: 2.1 meters
- Case width: 167 mm, with lid hinges 180 mm and lid open to the side 350 mm
- Case height: 292 mm
- Case lid width: 183 mm
- Housing cover height: 298 mm
- Immersion depth: 68 mm
The package includes:
- 2 Small O-ring
- 4 Valve
- 4 Valve stem
- 4 Large O-ring
- 4 Drill screw
- 1 Sealing washer
- 2 Film
Whale Gulper 220 Greywater Pump (12V)
Key features of the Gulper 220 Greywater Pump
The Whale Gulper 220 is a high-quality greywater pump, specially designed for the needs of boat wastewater treatment. The pump has a capacity of up to 14 liters per minute and is perfect for pumping shower or sink wastewater. The pump can also operate efficiently when the wastewater contains hair or sludge, making it particularly practical for boating use.
This 12V electric pump uses innovative diaphragm valve technology, which allows for the handling of air and water mixtures and dry running without damaging the pump. Its high suction capacity of up to 3 meters ensures reliable operation even in conditions with long water intake hoses. In addition, the 230g power consumption (3.5A) with energy-efficient operation saves the boat battery on long trips.
The pump is equipped with a 19 mm (¾") inlet connection and a choice of 19 mm (¾") or 25 mm (1") outlet connection, which increases its versatility in different boat systems. The Gulper 220 is a reliable and durable choice for all types of boating needs and offers a complete solution for trouble-free greywater management.
Durable and maintenance-free design without filters
The Gulper 220's diaphragm valve technology eliminates the need for filters, which reduces maintenance and minimizes downtime. Compared to traditional pumps, this model offers hassle-free maintenance, which is a significant advantage in boating conditions where repairs are often difficult to carry out.
The pump's construction is designed to withstand long-term wear. Its one-piece diaphragm effectively handles hair, sludge and other impurities in the wastewater that could clog a conventional impeller pump. In addition, the pump also runs dry, protecting it from damage if the wastewater tank is empty.
The lightweight (1.5 kg) and compact Gulper 220 is made of wear-resistant materials that are suitable for demanding boating conditions, such as moisture, salt and vibration. The pump is long-lasting and reliable, making it an excellent investment for greywater systems.
Easy installation in tight spaces on a boat
The ergonomic design of the Gulper 220 makes installation easier, especially on boats where space is limited. Thanks to its compact size and light weight, the pump is easy to place in the most difficult places, such as engine rooms or small storage rooms.
Clear mounting points and compatibility with different hose sizes and connections make installation uncomplicated. The 19 mm (¾") inlet hose attachment and optional connection options for the outlet (19 mm or 25 mm) increase flexibility for different boat system configurations. This makes the Gulper 220 a versatile solution.
The practical design also allows installation in locations where maintenance is desired to be as easy as possible. Special attention has been paid to the serviceability of the components, and basic boating skills are sufficient for installation without the need for complex tools.
Technical compatibility and connection options
The Whale Gulper 220 is compatible with both a 19 mm (¾") inlet hose and either a 19 mm (¾") or 25 mm (1") outlet hose, making it a suitable option for most wastewater systems. This freedom of choice allows for use with existing systems on different boats without requiring changes to the entire structure.
The pump's technical parameters, such as 12V voltage and 5A fuse, make it simple to connect it to the boat's electrical system. The minimum cable area requirement (1.5 mm²) is easily achievable in modern single battery systems. This ensures an efficient and safe power supply.
The Gulper 220 works optimally with a suction lift of up to 3 meters, which provides sufficient flexibility in choosing the location of the pump on the boat. This combined with its maintenance-free design makes it one of the easiest greywater pumps on the market to integrate.
Frequently Asked Questions (FAQ) Whale Gulper From 220
Can the Gulper 220 pump be used for anything other than greywater?
The Gulper 220 is specifically designed for grey water, such as shower and sink water. It is not suitable for pumping diesel or other oil-based liquids.What happens if the pump runs dry?
The Gulper 220 can run dry without damage. This feature makes it safe to use in situations where the water supply is temporarily unavailable.Is it difficult to install the pump yourself?
No. The Gulper 220 is designed to be user-friendly, and the clear instructions it comes with ensure effortless installation even without a professional. It also doesn't take up much space thanks to its design that fits in tight spaces.
- Capacity: 14 l/min
- Weight: 1.5Kg
- Voltage: 12V
- Fuse: 5A
- Current consumption: 3.5A
- Suction height: 3m
- Hose connection in: 19mm(¾")
- Hose connection out: 19mm (¾")/25mm (1")
- Minimum cable cross-section: 1.5 mm²
- Gulper 220 is not suitable for pumping diesel.
- Check valve
- 25mm/38mm
- Plastic
- Whale product number: LV1215
Capacity: Up to 55L/min
Connection hose: 25mm (1”)/38mm (1½”)
Weight: 0.7kg
- Bulkhead mounting
- Connection: 25/38mm
- Removable handle
- Capacity: 12 l/min
- Output connections: 3-4 pcs.
- Voltage: 12V
- Fuse: 12V: 7.5A
- Maximum pressure: 3 bar
- Suitable hose: Ø 15 mm
- Width: 179mm
- Height: 125mm
- Length: 209mm
- Weight: 150 grams
- CE certificate
- Length: 308mm
- Connection: 10mm/12mm
Durable check valve for use with manual or electric pumps. Prevents water from flowing back when the pumps stop. Hose sizes, 19mm (3/4") / 25mm (1"). Made of polypropylene and valves made of nitrile
- Durable check valve
- Made of polypropylene
- For hoses 19mm and 25mm
Compact pressure water pump for boating
The Whale Submersible Pressure Water Pump 12V is designed to meet the needs of boaters who require running water in a compact and energy-efficient solution. This pump is an ideal option for situations where efficient and reliable water distribution is required without the need for large systems. Its small size makes it easy to install and fits conveniently into a wide variety of tanks and structures.
The pump is specifically designed to be suitable for pumping both fresh and salt water, making it versatile and suitable for a variety of applications on a boat or similar environment. The large 10 liter per minute capacity ensures that water delivery is fast and efficient, meeting the expectations set for even smaller water systems.
In addition to its usability, the Whale 12V pump is designed to be self-priming, which reduces complications during installation and makes operation user-friendly. However, it is important to note that the pump should never be run dry, as this can damage the components of the device and shorten its lifespan.
Technical data: capacity, connection and power consumption
Flow capacity: 10 liters per minute, which is suitable for the needs of small boat systems. This fast flow allows for good water distribution.
Connection: Fits 10-12mm hose connections, making it compatible with most common systems used by boaters.
Power consumption: The pump operates on 12V and consumes only 2.4 amps, making it an energy-efficient solution that does not unnecessarily load the boat's electrical system.
Cable length: The pump comes with a 1 meter power cable as standard, which gives enough flexibility for installation.
Dimensions: The pump has a compact length of 108mm, which allows it to be placed in tight spaces.
Instructions for use and important notes for safe use
For optimal performance of the Whale 12V pump, it is recommended to place it in a vertical position in the water. This maximizes the efficiency of the impeller and prevents any air bubbles in the system.
When starting up, it is a good idea to fill the pump with water and ensure that the connections are tight before putting it into operation to prevent leaks or pressure losses in the system.
It is particularly important to note that the pump must not be run dry, as this may damage the impeller or other critical components. Dry running is one of the most common causes of premature pump failure, so it is recommended to keep the device fully covered with water at all times during operation.
Cleaning and maintenance are also essential to prolong the life of your pump. Regularly disassemble the pump and rinse it with clean water, especially after using it in saltwater. This will prevent minerals and other debris from building up inside the unit.
Frequently Asked Questions (FAQ) about the Whale 12V Pressure Water Pump
Can the pump be used with fresh and salt water?
Yes, the Whale 12V pump is designed to be suitable for both applications and is highly resistant to saltwater corrosion thanks to its stainless steel construction.Can the pump be used dry if the water tank runs out?
No, the pump must not be run dry. Running dry can permanently damage the impeller and other components.How often should the pump be cleaned?
It is a good idea to clean the pump after each use of salt water or at least once a month to ensure its trouble-free operation and long service life.
- Pressure water pump 10l/min
- Connection 12/12mm
- Submersible
- 12V
- No need for a separate switch
- Automatic elevation sensor
- Suitable for fresh and salt water use
- Mercury free
- Low power consumption
- Small and narrow, suitable for tight spaces
- Hose outlet horizontal or vertical
- Protected electronics
- The pump has long cables and a rotating outlet pipe for easy installation
- Water intake point below
- Easy to install
- Easy to clean, no tools required to open
- CE certified
- Voltage: 12V
- Consumption: 5 amps
- Capacity straight: 66L/min
- Capacity at one meter head: 47L/min
- Connections: 25/28mm
- Size: 75 x 54 x 240mm (W x H x D)
- Weight: 0.5 kg
Service kit with all serviceable parts for the Urchin (Neoprene™) model.
- 1 x Film
- 1 x Inlet valve
- 1 x Exhaust valve
- 2 x Lock ring, small
- 2 x Lock ring, large
The Gusher Titan is an efficient, lightweight bilge pump made from high-quality materials. The pump head can be rotated in any direction, allowing the inlets and outlets to be positioned as desired.
- Capacity: 105 liters at 70 pumps per minute
- Connection size: 38mm (1½”)
- Weight: 1.5kg
- Ring and bulkhead attachment
- Mounting: 38mm
- Removable handle
Product overview and uses
Whale Gulper septic pump 38mm 12V
The Whale Gulper 38mm 12V septic pump is a versatile and durable electric water pump, specifically designed for efficient draining of septic tanks and bilge water on boats. This pump offers a reliable solution for situations where water drainage is important, and is ideal for these types of challenging applications due to its reliability.
The pump's dry-running capability makes it particularly user-friendly, reducing concerns about damage to the pump during idle operation. Its design allows operation in all positions, increasing flexibility in installation options and versatility of use. This solution is ideal for both recreational sailors and professional mariners who require complete reliability in their water drainage system.
The Whale Gulper 38mm 12V pump is designed to provide long-lasting performance even in demanding conditions. Whether it's emptying a sealed septic tank or removing excess bilge water, this product offers an efficient yet low-maintenance solution for marine needs.
Technical features and performance
The Whale Gulper septic pump has a maximum lift height of 3 meters , making it suitable for use even in situations where hoses or tanks are in difficult installation positions. This maximum lift capacity ensures reliable water removal even in challenging environments, such as multi-layer boat systems.
The pump's compatible hose connection has a diameter of 38 mm , which corresponds to commonly used boat system dimensions and makes it easy to integrate into other systems. In addition, the pump operates with low power consumption and pumps 18 liters of water per minute , which allows for quick and efficient draining even with large volumes of water.
To ensure user comfort, the pump's noise is limited to 72 dB , making it significantly quieter than many other similar products on the market. This feature allows it to be used for longer periods of time without disturbing noise, thus improving the user experience, especially during team or family boating sessions.
Installation instructions and compatibility
The Whale Gulper septic pump is easy to install into your boat's existing system by attaching it to the appropriate hose connections. The pump's 38 mm connection diameter ensures compatibility with most common septic and bilge systems, and its compact size allows installation even in tight spaces.
The pump can be installed at any angle , as its operation is not dependent on the installation position. This makes it a flexible solution and allows for use in various boating conditions. However, we recommend installing the pump in an easily accessible location so that any maintenance operations can be carried out easily.
The installation process requires only basic tools such as hose clamps and hose compatibility checks. The pump operates on a 12V electrical system , making it ideal for use with standard systems on most boats. Please note that electrical installations should always be carried out with care and, if necessary, with the assistance of a professional.
Frequently Asked Questions (FAQ) Whale Gulper 38mm 12V
Can the pump be used dry without damage?
Yes, the Whale Gulper septic pump is designed to run dry, so it will not be damaged if the tank empties while the pump is running.How long is the standard electrical cable on the pump?
The product package does not include an electrical cable as standard. A 12V cable suitable for the boat's needs can be used for the electrical installation. The recommended cable thickness depends on the installation distance and power requirement.What kind of boats does this septic pump work best on?
The pump is suitable for both small and medium-sized boats, where its 18 liter per minute capacity and 3 meter lift height are sufficient for removing septic and bilge water.
Maintenance, durability and reliability
The Whale Gulper septic pump is designed to be a long-lasting and durable part of your boat's water system. Its dry-running capability eliminates the worry of damage during use, and durable materials keep the pump in working order even when exposed to salt water and other corrosive substances.
Maintenance is minimal, but we recommend that you check the pump system regularly as part of your boat's maintenance plan. This includes checking hose connections, ensuring electrical connections are working, and cleaning the pump housing as needed.
Whale products are known for providing highly reliable solutions for marine needs. The Whale Gulper pump has been tested to operate even in harsh weather conditions, making it a reliable choice for boaters who demand high performance for years of use.
- Maximum lift 3 meters
- Hose Ø 38mm
- Sound 72 dB
- Output 18 liters per minute
