AIS transmitters

Avoid the hassle and expense of installing a second antenna using your current single antenna with VHF/AIS/FM by adopting the lightweight and compact NSPL 500 antenna splitter. The NSPL 500 AIS system lets you see and be seen on the water, whether you're navigating busy shipping lanes or busy ports.

Features

• Plug and Play: FM connector for SonicHub™ 2 or other compatible FM stereo unit.
• Light weight: Only 260 grams.
• Waterproof: IPX7 standard.
• Low power consumption: Perfect for sailboats and powerboats, the NSPL 500 has an average power consumption of less than 150 mA, 12 V DC.
• Wide voltage range: The NSPL 500 is suitable for 12 or 24 V DC systems and supports a wide range of input voltages from 9.6 V to 31.2 V DC.
• Highly efficient , low insertion loss: The NSPL 500's efficient design means no insertion loss during AIS and VHF reception and low insertion loss during AIS and VHF transmission.

VHF Radio, B-AIS

Navigate the water more safely with this VHF marine radio. Class B AIS transceiver and built-in GPS. The integrated Class B AIS transceiver lets you see nearby AIS vessels and they can see yours. You can add up to two optional handsets to the system, allowing you to communicate from anywhere on the boat.

See and be seen with integrated AIS

The V60-B includes a Class B AIS transceiver that both receives AIS targets and communicates your vessel’s position to nearby AIS vessels. This allows other mariners to spot your vessel regardless of conditions, day or night. The built-in AIS receiver monitors the position of nearby AIS vessels, helping to avoid collisions in busy ports and heavily trafficked waterways. AIS data can be viewed on the radio display, on the chart or on the radar screen via the multifunction display.

Detachable handheld microphone

The V60-B radio's detachable handheld microphone can be connected to the front or rear of the radio. With the optional extension cable, the microphone and radio can be mounted separately. This creates an easy and cost-effective solution for installation in any location without the hassle of cables. For example, the RS40-B can be mounted on the ceiling without hanging cables, while the microphone can be connected to an additional socket in the dashboard below.

Expandable with wireless handset sets

By connecting the optional HS40 handset to the system, you can use the radio anywhere on your boat. Each handset displays the radio’s display and controls, allowing you to access all key functions remotely. Up to two handsets can be connected to a single V60-B radio. The radio also functions as an intercom for your vessel when multiple handsets are connected.

Note: Radio requires a VHF antenna (sold separately). AIS requires either a second VHF antenna or a VHF/AIS antenna splitter. All DSC functions require an MMSI number issued by your local authority; fees may apply.

Avoid trouble on the water

• Easy-to-use, reliable communication solution transmits your vessel's data to other AIS receivers in the area while receiving AIS target data
• 5 watts of transmission power and Class B/SO ensure the fastest location reporting ever ¹
• Internal GPS receiver with connection for optional external antenna
• NMEA 2000 ^® connectivity for easy integration with compatible chartplotters and multifunction displays
• Internal VHF antenna splitter allows VHF and AIS to use the same antenna

Increase your situational awareness and confidence on the water with the Garmin AIS 800 transceiver. With 5 watts of transmit power, it reports your position faster than ever before. ¹ It relays your vessel’s data to other AIS receivers in the area while receiving AIS target data. The Garmin AIS 800’s internal VHF antenna splitter allows VHF and AIS to share the same antenna. It features a built-in GPS receiver (with a connection for an optional external antenna) and integrates seamlessly with your boat’s Garmin system. The transceiver is easy to integrate with compatible chartplotters and multifunction displays via NMEA 0183/2000 ^® connectivity. All this fits into an easy-to-install, compact Blackbox unit. At speeds over 14 knots.

Icom AIS transmitter and receiver with display. The MA-510TR from Icom is an AIS transmitter and receiver with a high-resolution 4.3-inch TFT display. The display is bright, so it is easy to see in direct sunlight, and it also has a night mode that does not interfere with your night vision. In addition to menus, the display also shows other vessels and warns of vessels on a collision course - these are marked in red. Familiar vessels can be marked and saved in yellow.

The device is naturally NMEA2000 compatible, which allows you to display AIS data on your plotter or connect a VHF radio. The device can also be integrated with an Icom VHF radio for individual DSC calls (e.g. IC-M605EURO, IC-M506GE, IC-M424GE, IC-M400BBE or IC-M330GE).

This AIS transponder improves your safety at sea. By transmitting and receiving information about your own position and that of other vessels, you can avoid collisions and get help more efficiently if an accident occurs. The device is equipped with dual channels that receive information from both Class A and Class B transmitters simultaneously.

The MA-510TR is compact yet has a large, clear display, making it easy to find a suitable mounting location. The buttons are large and backlit. The device also has an anchor watch function that alerts you if the boat starts to drift. An external GPS antenna is included.

Specifications

• Warranty: 5 years

• IPX7 rating

• Voltage: 12V or 24V

Icom MA-600TRBB AIS transponder Class B+ 5 W

The Icom MA-600TRBB is a powerful Class B+ AIS transponder with SOTDMA technology and 5W transmit power. It is designed for boaters who want maximum visibility and safe navigation in all conditions.

The compact black box design allows for discreet installation and seamless integration into your boat's existing navigation systems while delivering professional-grade performance.

SOTDMA technology ensures that your vessel's position is transmitted faster, more stable and with higher priority, allowing other vessels to detect you sooner and more clearly.

Maximum visibility

• Class B+ SOTDMA technology with higher transmission priority
• Up to three times higher priority compared to a standard Class B system
• 5W transmission power for longer range and better visibility

Installation and use

• Compact black box design, can be installed concealed
• Full AIS functionality without a bulky display device
• Controllable from compatible devices

Silent Mode

• Possibility to pause AIS transmission without turning off the device
• Remotely controlled on and off
• Suitable for situations where inconspicuousness is desired

Integrated antenna splitter

• Can use the same VHF antenna with the radio
• No need for a separate antenna
• Makes installation easier

Compatibility

• Compatible with Icom IC-M510E EVO radio
• AIS data and control directly from the radio
• Real-time AIS target tracking without a separate display

Connections

• NMEA 2000 and NMEA 0183 HS compatibility
• Works with both new and older navigation systems
• Transmits AIS data to chartplotters, radar and multifunction displays

GNSS and connectivity

• GNSS antenna included
• Support for GPS, GLONASS and Galileo systems
• Fast and accurate positioning

USB-C connection

• Easy installation and configuration
• Enables AIS data transfer to a computer

Features

• IPX7 waterproof, withstands immersion in 1 meter for 30 minutes
• Designed for demanding marine conditions
• Efficient and reliable AIS solution for safe boating

The Link-9 VHF fixed-mount radio provides complete communication and data transfer capabilities reliably anywhere on the water

The radio includes safety-critical features such as built-in GPS, an internal dual-channel AIS receiver with AIS plotting, NMEA 2000®/0183 connectivity, a call/hailer output with listening function, Track Your Buddy™ and a dedicated MOB button.

GPS location in 4 ways

Built-in AIS

Remote-mountable handheld microphone

Easier front installation

Navigation mode

Package contents

• Link-9 walkie-talkie
• My handheld microphone and holder
• Recessed mounting kit
• Screen protector
• Mounting bracket
• Power cord

AIS transceiver NAIS 500

The NAIS 500 is a Class B approved automatic identification system that meets the strict requirements of this AIS class. The device significantly improves safety at sea by ensuring that you can see other vessels and be seen by others.

Send and receive

• Sends your vessel's navigation information to other vessels

• Receives AIS data from other vessels

• Allows for planning evasive maneuvers well in advance

Integrated solution

• Compatible with NSS, NSO and GO series chartplotters and multifunction displays

• Connectable to marine VHF radio

• Fully integrated system for boat electronics

Connections and networks

• Compatible with:

  • NMEA 2000

  • NMEA 0183

  • NMEA 0183 multiplexing

  • USB

Structure and properties

• Waterproof design according to IPX7 rating

• Lightweight construction, weighing only 250 g

• Low power consumption, average 180 mA at 12 V

NAIS 500 is ideal for both sailboats and motorboats that require a reliable and low-power AIS solution.

The GPS-500 is a GPS antenna intended for use with Navico AIS transceivers and VHF systems. It comes with a 10 meter cable with an SMA connector.

The latest generation fully integrated Class B AIS transponder. AIS is an essential navigation aid in today's busy shipping lanes and congested ports. Compact and lightweight, fully waterproof. Low power consumption and multiple connection ports. The NAIS-500 is compatible with all Navico Group (Simrad, Lowrance and B&G) AIS-enabled multifunction displays, as well as all other brands of AIS-enabled devices with NMEA 2000, NMEA 0183 or USB (computer) connectivity.

See ships moving around you

Helps you see and be seen at sea, a great help in today's congested ports and shipping lanes. AIS centrally monitors all vessels in sight and helps reduce the risk of collision by exchanging safety information between vessels.

As well as a variety of information about ships moving around

The NAIS-500 utilizes an advanced automatic digital time division transmission method, which enables the device to transmit and receive static information such as MMSI (Maritime Mobile Service Identifier), vessel name, call sign and vessel type. It can also transmit and receive dynamic information such as position, course and distance. The data is exchanged between vessels or between vessels and shore stations. When connected to a compatible chartplotter, the device displays the position and movements of all vessels within range and transmitting AIS data.

Versatile connections

The NAIS-500 is a Class-B AIS system that offers multiple connectivity options (NMEA 0183, NMEA 2000, USB and NMEA 0183 multiplexing). In addition to the versatile connectivity options, the NSPL-500 antenna splitter is available, which, when combined with the NAIS-500, allows the use of just one VHF antenna for VHF, AIS and FM radio receivers. This solution reduces the number of antennas and thus installation problems, as well as saving money.

Main features

• The enclosure protection class is IPX7.
• Class B AIS transceiver system with built-in 50-channel GPS receiver + external GPS-500 antenna
• NMEA-2000/SimNet/NMEA-0183 (high speed) compatible
• USB connection for computers
• AIS transceiver (AIS Class-B)

Specifications

• 38400 baud
• Power consumption 180 mAh 12 V
• Operating voltage 9.6 - 31.2 V DC
• Weight 250g
• IPX7 waterproof (30 min immersion at 1 m depth)

Product package contents

• NAIS-500 AIS module
• GPS-500 GPS antenna
• 1.8m NMEA 2000 cable
• NMEA 2000 T-connector

The AIS700 is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B transceiver, the AIS700 not only receives transmissions from other vessels, but also transmits your own vessel information, helping you to be visible to other vessels.