Anodes for boat hull
Anodes for boat hull -ryhmän tuotteet
Zinc anode
Zinc anode for protecting metal parts of a boat from corrosion. Especially suitable for rudders, rudder fittings, shaft sleeves, iron keel and steel hull.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
Mounting holes
- 6646: for 8 mm screw
- Length: 210mm
- Width: 27mm
- Height: 30mm
- Weight: 2kg
Zinc anode
Zinc anode for protecting metal parts of a boat from electrolytic corrosion. Suitable for rudder, rudder fittings, shaft sleeves, iron keel and steel hull.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
- Frame-mounted
- Overall dimensions 175 x 20 x 3mm
- Hole diameter 9 x 20mm
- Hole spacing 133mm
Zinc anode
Zinc anode for protecting metal parts of a boat from electrolytic corrosion. Suitable for rudder, rudder fittings, shaft sleeves, iron keel and steel hull.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
- Frame-mounted zinc
- Overall dimensions 170 x 15 x 3mm
- Hole diameter 9 x 20mm
- Hole spacing 129mm
Zinc anode
Zinc anode for protecting metal parts of a boat from corrosion. Especially suitable for rudders, rudder fittings, shaft sleeves, iron keel and steel hull.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
- Frame-mounted
- Overall dimensions 250 x 25 x 5 mm
- Hole diameter 13 x 25 mm
- Hole spacing 180 mm
Zinc anode for the rudder.
- Ø 70 mm
- Height 13mm
- Note! Sold individually!
- Weight 500g
- Length 120mm
- Width 46mm
- Height 35mm
Zinc anode to be attached to the frame.
- Length 200 mm
- Width 90mm
- Height 35mm
Body anode
Zinc anode for protecting metal parts of a boat from corrosion.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
Product information
Zinc ingot for welding or drilling your own mounting holes
Weight: 5.60 kg
Length: 400mm
Width: 90mm
Thickness: 40 mm
- Length 400mm
- Width 90mm
- Height 40mm
- Weight 5.6Kg
Stern anode zinc, 90mm. Sold per piece.
- Zinc
- Tail anode
• Weight: 300g
• Length: 175mm
• Width: 42mm
• Height: 24mm
• CC: 35mm
• Weight: 400g
• Length: 230mm
• Width: 55mm
• Height: 30mm
• CC: 180mm
Frame anode magnesium
Magnesium hull anode for protecting metal parts of a boat from corrosion. Suitable for rudders, rudder fittings, shaft sleeves, iron keels, keel rails and steel hulls.
Operation and installation
Installed completely below the water surface
The anode should always be in a horizontal position
Direct contact between the anode and the metal part to be protected is a prerequisite for operation
The outer surface of the anode must be free
The anode must not be painted.
- Aluminum
- Weight: 160g
- Length: 165mm
- Width: 34mm
- Height: 17mm
- CC: 117mm
