Composite Skin Fittings
Composite grommets.Composite Skin Fittings group products
Maximum body thickness below the waterline: 36mm (the ball valve to be connected requires 70% of the thread of the feedthrough to be installed correctly).
Use Sikaflex 292 or 591 to seal the penetration.
- Reinforced nylon
- Below and above the waterline
- Thread: R15-R40
Durable and lightweight composite skin fittings are designed and manufactured in New Zealand. No corrosion, no oxidation and no electrical leakage. Can be used with all boat building materials such as; steel, aluminum, fiberglass, plastic, etc. Certified (IMCI) to ISO 9093-2.
| Product number | Spiral | Mounting hole |
| 48894 | 1/2" | 22mm |
| 48900 | 3/4" | 27mm |
| 48893 | 1" | 33mm |
| 48892 | 1 1/4" | 42mm |
| 48891 | 1 1/2" | 48mm |
| 48897 | 2" | 60mm |
- Composite
- Above and below the waterline
- R15-R50
Composite (reinforced nylon) grommet suitable for use both below and above the waterline. When installed below the waterline, the TruDesign ball valve must be installed directly in the grommet. Suitable for all types of hulls, aluminum, steel, wood, fiberglass, etc. The material is very strong and lightweight. The material also cannot rust. Chemical resistant and resistant to diesel, gasoline, solvents, etc. UV resistant.
A plug-in ball valve requires 70% of the thread of the feedthrough to be installed correctly.
Use Sikaflex 292 or 591 to seal the penetration.
| Product number | Spiral | Mounting hole | Pipe length |
| 48820 | R15 (1/2") | 21mm | 65mm |
| 48823 | R20 (3/4") | 26mm | 65mm |
| 48824 | R25 (1") | 34mm | 65mm |
| 48825 | R32 (1 1/4") | 42mm | 85mm |
| 48826 | R40 (1 1/2") | 48mm | 85mm |
| 48898 | R50 (2") | 60mm | 90mm |
- Composite
- Below and above the waterline
- R15-R50
Grommet with hose connection made of composite (reinforced nylon) for use above the waterline. Suitable for all types of hulls, aluminum, steel, wood, fiberglass, etc. The material is very strong and light. The material also cannot rust. Resistant to chemicals and can withstand diesel, gasoline, solvents, etc. UV resistant.
Long hose nozzle with space for 2 hose clamps.
| Product number | Hose outlet | Mounting hole | Spiral |
| 48895 | 13mm | 22mm | 1/2" |
| 48948 | 16mm | 22mm | 1/2" |
| 48896 | 19mm | 27mm | 3/4" |
| 48899 | 25mm | 33mm | 1" |
| 48904 | 28mm | 33mm | 1" |
| 48901 | 32mm | 42mm | 1 1/4" |
| 48902 | 38mm | 48mm | 1 1/2" |
| 48903 | 50mm | 60mm | 2" |
- Composite
- Above the waterline
- For 13-50mm hoses
- Five different sizes
- Makes it easier to install the skin fitting
Strainer for seawater intake made of composite material (reinforced nylon). The material is very strong and lightweight. The material also cannot rust. Resistant to chemicals and withstands diesel, gasoline, solvents, etc. UV-resistant.
Can be painted with most basic colors.
Temperature range: -20°C - +110°C.
Approval: IMCI (International Marine Certification Institute), Bureau Veritas according to ISO standard 9093-2.
| Product number | Size | For feedthroughs |
| 48930 | 3/4" | 1/2" and 3/4" |
| 48908 | 1 1/4" | 1" and 1 1/4" |
| 48909 | 2" | 1 1/2" and 2" |
- Strainer for skin fittings
- Oval-shaped
- 90556
- Bottom strainer
- 1 1/4"
- Round 100 mm
- Composite
- 90 degree angle
- Connection for 38mm pipe
- Additional nut for feedthrough 3/4"
- Composite
