Engine maintenance equipment

Outboard motor lifting strap Barton

Bartonin perämoottorin nostoliina on tukeva ja luotettava apuväline perämoottorien käsittelyyn ja nostamiseen. Se on suunniteltu helpottamaan enintään 15 hevosvoiman ja 50 kg painavien perämoottorien siirtämistä. Kestävä rakenne ja ruostumattomat teräsosat takaavat pitkän käyttöiän vaativissa meriolosuhteissa.

Features

• Easy-to-use design

  • The sling can be quickly removed after installation using the two stainless carabiners on the front

• Adjustable fit

  • Adjustable design allows use with outboard motors of various sizes

• Durable construction

  • Made from strong woven webbing

  • Stainless buckles and fasteners resist corrosion and wear

Product information

• Maximum load: 50 kg

• Compatibility: most outboard motors up to 15 hp

• Material: durable woven tape and stainless steel parts

Anti-rust coating, 400ml, spray.

A handy pump suitable for 1L and 4L cans, which makes it easy to fill the gearbox with oil. Suitable for e.g. Mercury engines. A connection adapter is required for Japanese engines.

Rust remover CRC 5-56

A multi-purpose rust remover that removes rust, displaces moisture, lubricates and protects metal surfaces from re-rusting. Excellent for boats, vehicles and general maintenance work.

Features

• Dissolves rust

• Removes moisture

• Lubricates moving parts

• Protects metal surfaces from rusting

Applications

• Fasteners and bolts

• Moving mechanisms

• General maintenance and upkeep

Universal spray CRC 6-66

A multi-purpose spray for cleaning, lubricating and protecting. Displaces moisture and loosens stuck and rusted parts. Excellent for boats, vehicles and general maintenance work.

Features

• Clean

• Lubricates

• Protect

• Displaces moisture

• Removes rusted and stuck parts

Applications

• Moving parts and mechanisms

• Fasteners and bolts

• Electrical connections and metal surfaces

Engine protection agent CRC

Engine preservative that protects internal engine components from corrosion during storage and winter storage. Helps prevent rust and moisture damage when the engine is idle.

Use

• Engine storage and preparation for winter storage

• Especially suitable for carburetor engines

User manual

• Start the engine

• Let the engine run at high idle speed.

• Spray a generous amount of engine preservative into the carburetor air intake for a few minutes

• Turn off the engine.

• In the spring, the engine is started normally

If you wish, I can harmonize this with other engine maintenance products in the same structure.

Starting gas CRC

Starting gas for engines that are difficult to start. Helps to start in cold conditions and in situations where the engine does not start normally.

Use

• Hard-to-start engines

• Cold start

Features

• Speeds up engine starting

• Suitable for various engine types

Primer CRC Zinc Primer

Fast-drying zinc phosphate-based primer for corrosion protection of metal surfaces. Improves adhesion of topcoat and protects metal from rusting. Excellent for priming before painting.

Features

• Zinc phosphate-based corrosion protection

• Quick-drying

• Improves topcoat adhesion

Product information

• Color: gray

• Suitable for metal surfaces

Flushing device for +50 hp outboard motors

Flushing device for powerful outboard motors and drives over 50 horsepower. Intended for flushing the engine with fresh water after use and during preparation for winter storage. Two water hoses provide a higher water flow and ensure that cooling water is supplied to both sides of the drive.

Use

• Freshwater flushing of outboard motors and propulsion equipment

• Installed above the cooling water intakes

• Connects to fresh water hose

Safety instructions

• Do not operate the outboard motor at speeds exceeding 1200 rpm.

• Do not operate the Mercruiser drive at speeds greater than 600 rpm.

• Make sure the motor does not overheat during operation.

• Remove the propeller before use.

• Always follow the engine manufacturer's instructions.

Attention

• To ensure sufficient cooling, a water pressure of approximately 5 bar is required from the water hose.

• To use the Gardena connection, a separate hose connector is required, item number 7296

If you wish, I can also make a shorter version of this or edit the text to be completely consistent with other flushing devices.

For freshwater flushing of outboard motors.

Flushing device for inboard engines

Flushing device for fresh water flushing of the cooling system of inboard engines. The device is connected to the cooling water intake located outside the hull and connected to a water hose. The telescopic arm makes installation and use easier.

Use

• Freshwater flushing of inboard engines

• Connects to the cooling water inlet on the outside of the frame

• Compatible with standard water hose

Safety instructions

• Make sure the motor does not overheat during operation.

• Remove the propeller before use.

• Always follow the engine manufacturer's instructions.

Flushing device for Volvo Penta drives

Flushing device for freshwater flushing of the cooling system of Volvo Penta drives. Intended for use during engine maintenance and preparation for winter storage. The device is installed over the cooling water intakes and connected to the freshwater supply.

Use

• Freshwater flushing of Volvo Penta drives

• Installed over the cooling water intakes

• Connects to water hose

Safety instructions

• Make sure the motor does not overheat during operation.

• Remove the propeller before use.

• Always follow the engine manufacturer's instructions.

Attention

• A separate hose connector is required for use with a garden hose, product number 7296.

Waste oil canister 12 liters Eco

Ekologinen ja turvallinen jäteöljykanisteri moottoriöljyn keräämiseen ja kuljettamiseen. Ilmastoitu korkki ja tukeva kantokahva tekevät kanisterista helppokäyttöisen ja turvallisen valinnan öljynvaihtojen yhteydessä. Öljy on helppo tyhjentää ja kuljettaa kierrätyspisteeseen.

Features

• Ventilated cap for easy emptying

• Sturdy carrying handle for safe transport

• Easy and clean to use

• Stackable structure

Dimensions

• Height: 40.5 cm

• Depth: 16.5 cm

• Width: 30 cm

Product information

• Capacity: 12 liters

• Material: recycled HDPE plastic

• Made in Finland

Surroundings

• Made from recycled plastic

• 1 kg of recycled plastic saves 1.5 kg of carbon dioxide compared to new plastic

Manual oil changer with collection tank. Sucks in liquid using vacuum. A hand pump creates vacuum in the tank, which sucks the oil into a graduated container. Not for use with gasoline, only for engine oil.

Includes 4 different sized suction hoses with inner diameters of 4, 6, 8 and 10mm and a length of 1 meter.

Hose connector to connect the water hose to the flushing device.

Funnel MR Funnel with fuel filter

MR Funnel with built-in fuel filter. The filter separates dirt and water from gasoline, diesel and gasoline diluted with oil. Especially suitable for use when refueling from canisters or tanks where condensation may occur.

Use

• Gasoline refueling

• Diesel refueling

• Refueling with gasoline diluted with an oil mixture

Product information

• Built-in fuel filter

• Filters dirt and water

• Diameter: 120 mm

Flushing device for freshwater flushing of outboard motors. The device allows you to start the outboard motor even when the boat is on land.