Fuel Gauges

Fuel gauge for boat on black background. Installation size general 52mm.

The VL FLEX 52 is a versatile marine instrument that supports analog sensors, NMEA 2000 and LIN interfaces. Its bright 1.44" display fits perfectly into a standard 52mm housing and displays data in single or dual values. It also has a digital input for easy switching between day and night mode.

The VL Flex 52 displays the boat's most important engine values, such as RPM, temperature, pressure and fuel level. The values ??displayed can be easily configured using the app on an NFC-enabled phone. Alarms can be set for incoming signals and are clearly displayed in red so that potential problems can be quickly identified.

The VL Flex 52 has two analog inputs, one for RPM and one for resistance measurements such as temperature, tank level or pressure. One of the inputs is reserved for battery monitoring with the Veratron IBS system. In addition, the device has a NMEA 2000 input, which allows data to be received and displayed from a NMEA 2000 network. A comprehensive list of data that can be received and displayed can be found in the user manual.

Analog inputs allow direct reading of engine sensor data. NMEA 2000® and LIN 2.0 interfaces extend functionality by enabling the processing of digital network data.

Specifications
Nominal voltage: 12/24V
Operating voltage: 8-32V
Power consumption: 50mA (maximum backlight)
Protection class: IP67
Dimensions: outer diameter 60mm, mounting hole diameter 52mm
Frame: Black polycarbonate
Lens: PMMA, anti-reflective and anti-fog treatment
Display: 1.44-inch sunlight-readable color TFT
Resolution: 125x125 pixels
Analog inputs: 1x resistance measurement / 1x frequency
Connection: Tyco/Hirschmann MQS connector, 8 pins
Digital ports: NMEA 2000, LIN bus
Wireless connection: NFC
Operating temperature: -20°C – +70°C

Display modes:
Fuel level
Freshwater level
Wastewater level
Trim angle
Rudder angle
Coolant temperature
Boost pressure
Engine oil temperature
Drivetrain oil pressure
Depth
Tachometer
Speedometer
Ammeter
Voltmeter
Battery state of charge (SOC)
Battery temperature
Remaining battery life
Engine hours
Speed ??on Ground (SOG)
Course of travel (COG)
Clock

The Viewline fuel gauge provides accurate fuel level information and is compatible with a variety of fuel tanks. The gauge is designed to be used with lever sensors, ensuring reliable and accurate measurement results.

Specifications:
Diameter: 52mm
Installation depth: 50mm
Operating voltage: 10–32V
Front panel and instrument panel color: black
Display: analog
Resistance when empty: 3 Ohm
Resistance when full: 180 Ohm
Sensor type: lever sensor
Additional information:
8-pin Tyco/Hirschmann MQS connector
Measurement accuracy: ±3.6° across the entire display range
Power consumption: less than 140mA with LED warning light
Polarity protection
Input current: standard Ohm values
Screen rotation angle: 90°
Installation diameter: 52mm
Immersion depth: 50mm
Frost-free double glazing
Front panel: IP67 rated
Red LED warning light

Fuel gauge for S3/S5 sensors, 240-30 ohm. Installation Ø 52 mm, installation depth 62 mm, total Ø 62 mm. Red and yellow lighting as standard. Operating voltage 12/24 V. White base, white frame.

Wema MFG is a 3-inch color LCD multifunction meter with eight different meter views to choose from. You can also define the meter's background color yourself between white, black, gray and blue. The meter can be connected either to a NMEA2000 network or it can receive information from analog signals.

What is displayed: speed (15/30/60 knots, km/h, mph), speed (4000, 6000 and 8000 rpm), engine hours, oil pressure, water temperature, voltage, fuel tank level, warning lights.

The Wema MFG is rugged and waterproof IP67, made for marine use. Supplied with a 1m NMEA2000 drop cable with female and male connectors, and an additional cable for connecting to analogue sensors (instead of NMEA2000). Operating voltage 12V via NMEA bus or 9 – 32V analogue.

Fuel gauge for S3/S5 sensors, 0-190 ohm. Standard red and yellow lighting. Operating voltage 12/24V. White base, white frame.

Fuel gauge for S3/S5 sensors, 0-190 ohm. Standard red and yellow lighting. Operating voltage 12/24 V. Black base, stainless steel frame.

Fuel gauge for S3/S5 sensors, 0-190 ohm. Installation Ø 52mm, installation depth 62mm, total Ø 62mm. Red and yellow lighting as standard. Operating voltage 12/24 V. White base, stainless steel frame.

Fuel gauge for S3/S5 sensors, 240-30 ohm. Installation Ø 52mm, installation depth 62mm, total Ø 62mm. Red and yellow lighting as standard. Operating voltage 12/24 V. Black base, black frame.

The oil pressure gauge monitors the engine oil pressure. It is an important tool to prevent engine damage if the pressure is too low for any reason. Connects to Weman's oil pressure sensor, SRP.