Hydraulic pumps and cylinders
Hydraulic pumps and cylinders as spare partsProduct groups
Hydraulic pumps and cylinders group products
90 degree hydraulic connector, thread 9/16" UNEF (O-ring thread). The angle connector makes it easier to route the hydraulic hose in tight spaces, for example when connecting a pump, cylinder or valve in a boat's hydraulic steering or trim system, when a straight connector will not fit.
- Angle 90 degrees
- Thread 9/16" UNEF, O-ring sealed connection
- Used, for example, in hose connections for hydraulic steering or trim systems
- Always check the compatibility of the thread and connection type with your system before installation.
The Multisteer HP-16 hydraulic pump has a robust construction with a built-in pressure relief valve to protect the steering system from overpressure and a tapered shaft with standard dimensions of 3/4". The steering pump is not a non-feedback model and is designed to be easily interchangeable with other compatible brands. Includes a pair of 90° adjustable connectors made of chrome-plated brass for connection to 5/16" hose pipe. Installation hardware included.
Specifications
- Model: HP-16
- Volume: 16cm³ / 0.9ci.
- Nipple thread: 9. /16-24 UNEF
- Recommended steering wheel diameter: 280mm
- Weight: 2.3kg.
- Maximum pressure 50bar.
- HP-16
- Durable design
- Back valve
Multisteer HP-20 hydraulic pump. The pump has a standard 3/4' cone, so most steering wheels are suitable for installation. It also has a non-feedback function, which prevents the steering or motor from moving with the steering wheel. It is easy to replace seals and shut-off valves as needed.
Steering wheel mounting: 3/4'
Volume: 20cm³
Non-feedback
Pressure relief valve
90 degree connectors included
Suitable for 5/16' hoses
Designed for integration with other hydraulic controls
Mounting hardware is included, making the pump easy to install. It is also designed to be compatible with hydraulic steering systems that are not manufactured by Multisteer.
Specifications:
Cone size for steering wheel: 3/4'
Volume: 20cm³
Hydraulic connector thread: UNEF 9/16-24
Pressure relief valve: 70bar
Recommended steering wheel size: 350mm
Weight: 4.2kg
Steering wheel mounting: 3/4'
Volume: 20cm³
Non-feedback
Pressure relief valve
90 degree connectors included
Suitable for 5/16' hoses
Designed for integration with other hydraulic controls
Mounting hardware is included, making the pump easy to install. It is also designed to be compatible with hydraulic steering systems that are not manufactured by Multisteer.
Specifications:
Cone size for steering wheel: 3/4'
Volume: 20cm³
Hydraulic connector thread: UNEF 9/16-24
Pressure relief valve: 70bar
Recommended steering wheel size: 350mm
Weight: 4.2kg
•Hydraulic pump
•20cm³
•Multisteer
•20cm³
•Multisteer
Multisteer HP-27 hydraulic pump
The pump has a standard 3/4" cone, so most steering wheels are suitable for installation. It also has a non-feedback function that prevents the steering or motor from moving with the steering wheel. It is easy to replace seals and shut-off valves as needed.
- Steering wheel mounting: 3/4"
- Volume: 27cm³
- Non-feedback
- Pressure relief valve
- 90 degree connectors included
- Suitable for 5/16" hoses
- Designed for integration with other hydraulic controls
- Mounting hardware is included, making the pump easy to install. It has also been developed to be compatible with hydraulic steering systems that are not manufactured by Multisteer.
Specifications:
- Cone size for steering wheel: 3/4"
- Volume: 27cm³
- Hydraulic connector thread: UNEF 9/16-24
- Pressure relief valve: 70bar
- Recommended steering wheel size: 400mm
- Weight: 4.2kg
- Hydraulic pump
- 27cm³
- Multi-steer
Multisteer Hydraulic Pump HP-33
The pump has a standard 3/4" mounting, which allows it to be installed on most steering wheels. It has a non-feedback function that prevents the steering or motor from moving with the steering wheel. It is easy to replace seals and shut-off valves as needed.
- Steering wheel mounting: 3/4"
- Volume: 33cm³
- Non-feedback
- Pressure relief valve
- 90 degree connectors included
- Suitable for 5/16" hoses
- Designed for integration with other hydraulic controls
- Mounting hardware is included, and the track pump is easy to install. It is also compatible with non-Multisteer hydraulic steering systems.
Specifications:
- Steering wheel mounting: 3/4"
- Volume: 33cm³
- Hydraulic connector thread: UNEF 9/16-24
- Pressure relief valve: 70bar
- Recommended steering wheel size: 400mm
- Weight: 4.2kg
- Hydraulic pump
- 33cm³
- Multi-steer
Multisteer cylinder OC-115U is suitable for outboard motors up to 115 hp. Front mounted and balanced Heavy Duty cylinder. Made of stainless steel SS 316L material that withstands the most demanding environments.
The steering cylinder is compatible with all Multisteer steering pumps.
Specifications:
- Volume: 90cm²
- Torque: 329kgf
- Stroke length: 195mm
- Weight: 2.1kg
- Air nipples: AB1
- Thread: UNEF 9/16-24
- Steering cylinder
- For outboard motor -115hp
- Multi-steer
Campaign
Multisteer cylinder OC-175 is suitable for outboard motors with a power of up to 175 hp. Front mounted and balanced Heavy Duty cylinder. Made of stainless steel SS 316L material that withstands the most demanding environments.
The cylinder is compatible with all Multisteer steering pumps.
Specifications:
- Volume: 122cm²
- Torque: 422kgf
- Stroke length: 203mm
- Weight: 3.7kg
- Air bundles: AB1
- Thread: UNEF 9/16-24
- Steering cylinder
- For outboard motors 115-175hp
- Multi-steer
Seal kit designed for the Multisteer hydraulic cylinder OC-115 ensures optimal tightness and long-term performance. Seal Kit 115U contains all the necessary components for effective sealing and protection against leaks.
•Gasket set
•Complete series
•Multisteer for OC-115
•Complete series
•Multisteer for OC-115
Spare part for Ultraflex hydraulic controls.
- Suitable for UP20F pump
For flush mounting on a steering pump.
- 93065 Mounting gasket X57: fits UP25F, UP28F, UP33F, UP39F and UP45 models.
- 93081 Mounting gasket X64: fits UP25F, UP28F, UP33F, UP39F and UP45 models.
- 93100 Mounting gasket X74: fits UP20F.
- Rectangular
- Recessed set
Ultraflex adapter that allows you to install a hydraulic cylinder directly to your Suzuki outboard motor. Compatible engines manufactured between 1998 and 2008. The adapter is compatible with the following hydraulic cylinders: UC81-OBF, UC94-OBF and UC128-OBF
- Adapter
- For hydraulic cylinder
- Fits Suzuki 1998-2008
Tool kit for dismantling the Ultraflex UC94 cylinder when replacing seals.
- For UC94 cylinder
Spare part for Ultraflex hydraulic steering.
- UC116 hydraulic cylinder
Campaign
Balanced cylinder designed for boats with sliding hulls up to 8.5m in length or 9.5m in displacement hulls.
Specifications:
- Maximum torque: 58Kgm
- Stroke: 178mm
- Output force: 455Kg
- Cylinder capacity: 116cm³
Installation requirements (accessories not included):
- Steering wheel
- Pump UP28F
- Hydraulic cylinder UC 116-I
- High pressure hose 3/8" (twice the distance between the pump and the cylinder)
- 4 nipples
- 2 liters of hydraulic oil ISO VG 15.
Dimensions in the picture:
- A = 178 mm
- B = 155 mm
- C = 127 mm
- D = 464 mm
- E = 102 mm
- F = 40 mm
- G = 73 mm
- Steering cylinder for rudder
- For boats up to 8.5m
- Volume 116m3
- Ultraflex
Suitable for outboard motors up to 300 hp. Balanced cylinder with equal stroke on both left and right sides.
Cylinder information:
- Stroke: 198mm
- Thrust: 450kg
- Cylinder volume: 120cm³
- Total width: 544mm
- Steering wheel revolutions: 4.5
The following parts are required for installation (not included in addition to the cylinder):
- Steering wheel
- Pump UP28F
- Hydraulic cylinder UC128 - OBF
- High pressure hose 3/8" (twice the distance between the pump and the cylinder)
- 4 nipples
- 3 liters of hydraulic oil ISO VG 15
Note: product number 93040 does not fit Honda BF115 & BF130 from 1998–2017, nor Mercury Optimax 75, 90 & 115.
- Outboard motors up to 300hp
- Cylinder
- Ultraflex
Suitable for outboard motors up to 300 hp
Balanced cylinder with equal stroke on both left and right sides.
Cylinder information:
- Stroke: 198mm
- Thrust: 450kg
- Cylinder capacity: 128cm³
- Total length: 527mm
- Steering wheel revolutions: 4.5
The following parts are required for installation (not included in addition to the cylinder):
- Steering wheel
- Pump UP28F
- Hydraulic cylinder UC128 - OBF
- High pressure hose 3/8" (twice the distance between the pump and the cylinder)
- 4 nipples
- 3 liters of hydraulic oil ISO VG 15
Note: Product number 93040 does not fit Honda BF115 & BF130 from 1998–2017, nor Mercury Optimax 75, 90 & 115.
- For outboard motors up to 300hp
- Cylinder
- Ultraflex
Campaign
The Ultraflex Hydraulic Cylinder UC132-OBS offers powerful performance with a displacement of 132/163cc and a piston force of 464/574kg. Installation is smooth thanks to the patented swivel nut, and requires only 375mm of clearance when installed. This cylinder is ideal for speeds up to 48 knots or 52 knots for twin installations.
Specifications:
- Cylinder capacity: 132/163cc
- Piston force: 464/574 kg
- Inner diameter: 32 mm
- Stroke length: 203 mm
- Connections for high-pressure hoses: 3/8 inch
The cylinder is for Mercruiser and Volvo sterndrives equipped with a booster
- For side mounting
- Navigating boats up to 48/52 knots
- Ultraflex
Campaign
Cylinder for AQ drives without booster
Balanced, same stroke length left and right. Stainless steel and aluminum. CE approved. Supplied with nipples for 3/8" hoses. Suitable for the following towbars:
- Mercruiser Alpha 84
- Mercruiser Bravo 1 84
- Mercruiser Bravo 2 84
- Mercruiser Bravo 3 84
- OMC Cobra* 86
- OMC King Cobra* 86
- Volvo Penta 275
- Volvo Penta 280
- Volvo Penta 290
- Volvo Penta DP-E* (original adapter required, VP no. 872388)
- Volvo Penta DPS/SX* (original adapter required)
Specifications:
- Maximum steering torque: 66Kgm
- Stroke length: 203mm
- Cylinder capacity: 132cm³
- Inner dimension 32mm
- Thrust 455Kg
Installation requires (accessories not included):
- Steering wheel
- Pump UP28F
- Hydraulic cylinder UC133 -IOB
- Hydraulic hoses 3/8" (2 x distance between steering pump and cylinder)
- 4 nipples
- 2 liters of hydraulic oil ISO VG 15
- Stainless steel & aluminum
- The cylinder is for Mercruiser and Volvo sterndrives that are not equipped with a booster.
- Volume 132m3
- Ultraflex
Campaign
Balanced cylinder
Designed for planing boats up to 11.6m in length or 13.4m in displacement hulls. Also fits Volvo Penta AQ270 & AQ280 without power steering and steering tube.
Specifications:
- Maximum torque: 87Kgm
- Stroke: 178mm
- Output force: 682Kg
- Cylinder capacity: 168cm³
Installation requirements (accessories not included):
- Steering wheel
- Pump UP28F
- Hydraulic cylinder UC 168-I
- High pressure hose 3/8" (twice the distance between the pump and the cylinder)
- 4 nipples
- 2 liters of hydraulic oil ISO VG 15.
- For boats up to 11.6 m
- Cylinder capacity: 168cm³
- Ultraflex
Service kit for Ultraflex UC94 cylinder.
Suitable for, among others, 40154F UC94 cylinder.
