Outboard motor accessories
General accessories for outboard motors.Product groups
Outboard motor accessories group products
OUTLET
Safety switch made of chrome-plated brass. Plastic-coated safety cable. Stops the engine if the operator falls in the boat or overboard.
- Safety switch
- "Dead Man's Switch"
- For inboard engines
- Complete set
Campaign
Safety switch made of chrome-plated brass. Plastic-coated coiled cord. Stops the engine if the operator falls in the boat or overboard.
- Emergency stop switch
- Dead man's switch
- For outboard motors
- Complete set
A durable, round braided rope that is used, among other things, as an outboard motor starter rope.
- UV-resistant
- 16-strand polyamide
A durable, round braided rope that is used, among other things, as an outboard motor starter rope.
- UV-resistant
- 16-strand polyamide
A durable, round braided rope that is used, among other things, as an outboard motor starter rope.
- UV-resistant
- 16-strand polyamide
Makes it easier to lift the engine. Suitable for engines up to 15 hp. Maximum 50 kg.
- Lifting belt
- Engine up to 15hp
- Maximum weight 50kg
Outboard motor extension arm, telescopic model, anodized aluminum tube, fits most outboard motors.
- Length: 60 – 100 cm
- Tube: anodized aluminum
- Telescopic
For outboard motors. Telescopic structure.
- Material: Aluminum and reinforced plastic
- Telescopic
- Length: 610-1010mm
Spare key for product 9514003012
- Color: Red
- Material: Plastic
Oil and petrol resistant nitrile rubber. For manufacturing your own seals and spacers, for example in fuel tanks and inspection hatches.
Temperature range: -30 degrees to +100 degrees.
- Length: 200mm
- Width: 200mm
- Thickness: 2mm
Boat ignition switch.
- 3-position, 3-pole ignition switch
- Black plastic
- Screw terminals
- Total length 66 mm
For water-cooled exhaust systems. Cast Eltex. Adjustable hose Ø 40.5 / 45.5 / 50.5.
Dimensions:
- A: Ø 40.5 / 45.5 / 50.5mm
- W: 400mm
- C: 290mm
- D: 760mm
- For water-cooled exhaust systems
- Volume: 33 liters
- Molded Eltex
new
Martec's 12mm vacuum (anti-siphon) valve is a safe, reliable protective component for your boat's engine. It's designed to effectively prevent siphoning in the engine's exhaust outlet — a phenomenon where, after the engine shuts off, water can be drawn back into the engine through the exhaust and cause severe, potentially engine-destroying damage. The valve is made from corrosion-resistant materials, fully leak-proof, and designed for easy installation even in tight engine bays.
This 12mm model is compatible with Yanmar YSE8-12 (raw-water cooled) and 1GM (raw-water cooled) engines, giving lasting protection that preserves engine function and lifespan. A popular spare part for Yanmar engine servicing and replacing worn-out valves.
This 12mm model is compatible with Yanmar YSE8-12 (raw-water cooled) and 1GM (raw-water cooled) engines, giving lasting protection that preserves engine function and lifespan. A popular spare part for Yanmar engine servicing and replacing worn-out valves.
- 12mm diameter
- Compatible with Yanmar 1GM/YSE8-12 engines
- Prevents siphoning in the exhaust outlet
- Corrosion-resistant, leak-proof material
new
Martec's 16mm vacuum (anti-siphon) valve is a safe, reliable protective component for your boat's engine. It effectively prevents siphoning in the engine's exhaust outlet — a phenomenon that can otherwise draw water back into the engine and cause serious damage while the engine is off. The valve is made from corrosion-resistant materials, fully leak-proof, and easy to install even in a tight engine bay.
This model fits a wide range of Volvo Penta engines (MD1, 2, 3, 5, 6, 7, 11, 17, MB10, MD2001, 2002, 2003) and Yanmar engines (YSE8-12 fresh-water cooled, YSB8-12, YSM8-12, 1GM fresh-water cooled, 2GM, 3GM, 2QM15, 2QM20). Always check your exact engine model before ordering, as older Volvo Penta and Yanmar models use different valve sizes.
This model fits a wide range of Volvo Penta engines (MD1, 2, 3, 5, 6, 7, 11, 17, MB10, MD2001, 2002, 2003) and Yanmar engines (YSE8-12 fresh-water cooled, YSB8-12, YSM8-12, 1GM fresh-water cooled, 2GM, 3GM, 2QM15, 2QM20). Always check your exact engine model before ordering, as older Volvo Penta and Yanmar models use different valve sizes.
- 16mm diameter
- Compatible with many Volvo Penta and Yanmar engines
- Prevents siphoning in the exhaust outlet
- Corrosion-resistant, leak-proof material
new
Martec's 19mm vacuum (anti-siphon) valve is a safe, reliable protective component for your boat's engine. It effectively prevents siphoning in the engine's exhaust outlet — a phenomenon that can otherwise draw water back into the engine and cause serious damage while the engine is off. The valve is made from corrosion-resistant materials, fully leak-proof, and easy to install even in a tight engine bay.
This model fits Volvo Penta engines MD2010, 2020, 2030, 2040, D1-13, D1-20, D1-30, D2-40 and Yanmar engines 2YM15, 3YM20, 3YM30 — typically newer, more compact inboard engines. Always check your exact engine model before ordering.
This model fits Volvo Penta engines MD2010, 2020, 2030, 2040, D1-13, D1-20, D1-30, D2-40 and Yanmar engines 2YM15, 3YM20, 3YM30 — typically newer, more compact inboard engines. Always check your exact engine model before ordering.
- 19mm diameter
- Compatible with Volvo Penta D1/MD2010-series and Yanmar YM-series engines
- Prevents siphoning in the exhaust outlet
- Corrosion-resistant, leak-proof material
new
Martec's 22mm vacuum (anti-siphon) valve is a safe, reliable protective component for your boat's engine. It effectively prevents siphoning in the engine's exhaust outlet — a phenomenon that can otherwise draw water back into the engine and cause serious damage while the engine is off. The valve is made from corrosion-resistant materials, fully leak-proof, and easy to install even in a tight engine bay.
A robust, reliable choice for boat owners who want to ensure trouble-free engine operation. Always check your engine model and exhaust hose diameter before ordering — anti-siphon valve sizing varies between engine manufacturers.
A robust, reliable choice for boat owners who want to ensure trouble-free engine operation. Always check your engine model and exhaust hose diameter before ordering — anti-siphon valve sizing varies between engine manufacturers.
- 22mm diameter
- Prevents siphoning in the exhaust outlet
- Corrosion-resistant, leak-proof material
new
Martec's 25mm vacuum (anti-siphon) valve is a safe, reliable protective component for your boat's engine. It effectively prevents siphoning in the engine's exhaust outlet — a phenomenon that can otherwise draw water back into the engine and cause serious damage while the engine is off. The valve is made from corrosion-resistant materials, fully leak-proof, and easy to install even in a tight engine bay.
This model fits Volvo Penta engines MD22, TMD22, MD31, D2-55, D2-75, D3 and Yanmar engines 3JH, 4JH — typically mid-size and larger inboards. Always check your exact engine model before ordering.
This model fits Volvo Penta engines MD22, TMD22, MD31, D2-55, D2-75, D3 and Yanmar engines 3JH, 4JH — typically mid-size and larger inboards. Always check your exact engine model before ordering.
- 25mm diameter
- Compatible with Volvo Penta MD22/D2/D3-series and Yanmar 3JH/4JH engines
- Prevents siphoning in the exhaust outlet
- Corrosion-resistant, leak-proof material
new
This repair kit for Martec vacuum (anti-siphon) valves fits all valve sizes (12–25mm), so a single spare-part number covers valves of every size. The kit includes the cap and rubber valve — the two parts that typically wear out or age first over time, causing the valve to leak or stop working reliably. An affordable way to service an existing vacuum valve yourself without replacing the whole unit.
- Fits all Martec vacuum valve sizes (12-25mm)
- Includes cap and rubber valve
- Affordable alternative to replacing the whole valve
- Easy to service yourself
Kynsilevy valkoista muovia.
Kynsilevy valkoista muovia.
