Outlet painting and renovation
Boat paints, repair materials and accessories at OUTLET prices.Outlet painting and renovation group products
As a primer, you can use M-protect primer, product number 22149, or CRC Zinc primer (product number 21019).
Clearcoat (product number 22139) should be applied over the drive wheels and engine paint for better protection, depth and shine.
Contents: 400 ml
FFP2 respirator. Protects against solid and liquid particles, such as: asbestos, chromium, copper, titanium, wood dust, welding and soldering.
- FFP2 respirator
- Convex design, nose clip and two straps
- Comfortable, face-fitting design
Airing roller, width 140mm.
- Aluminum roller
- For air removal when laminating
- Width: 140mm
Dark blue pigment for Lefant T-coat, product number 23100.
- Epoxy paint
- Pigment for T-coat
- 6 m²/liter
A powerful polishing machine that helps you polish quickly and easily. Gives your boat a brand new shine! Adjustable speed and soft start. Includes side handle and U-handle. Supplied with 1 polishing pad (125 mm), fixed spanner and 1 pair of extra carbon brushes. For polishing foams etc. with a diameter of 125 mm. DATA: 230 V / 850 W.
- 850W
- Rotating & eccentric
- 125mm polishing disc
- Cable length 4m.
- Weight 2.7Kg
Effectively removes tarnish from the bottom of the boat, sterndrive, buoy, etc. Also removes minor corrosion damage from aluminum and bronze.
User manual
Pre-treatment: For best results, scrape off most of the barnacles except the bottom before spraying Barnacle Remover on them. Method: Spray Barnacle Remover onto the barnacle shells and leave to work for a few minutes. Remove the barnacle shells with a pressure washer and/or by gently scraping them off. Repeat if necessary. Rinse with fresh water. Tips: Mixing Shake before use. Important information: Barnacle Remover contains hydrochloric acid. Read and follow the health and safety instructions on the label carefully. Remove the nozzle and rinse with water immediately after use. Close the bottle with the original cap. The product temperature must be between 5°C and 35°C. The ambient temperature must be between 5°C and 35°C. The substrate temperature must be between 5°C and 35°C. Compatibility/Substrates: Suitable for all materials and puttyed surfaces.
- Application by sprayer
- You can easily scrape and rinse off the stains.
- Suitable for all surfaces
- Does not damage adjacent surfaces
- Removes minor rust damage from aluminum and bronze
- Application methods: Spraying
- Size 0.5L
An effective cleaning gel that absorbs and removes stains and yellowing from gelcoat and paint surfaces.
Reactive formula - cleans without rubbing or scratching. Gel-like formula - stays on vertical surfaces.
INSTRUCTIONS FOR USE
Pre-treatment: To avoid scratches caused by dirt, clean the surface with Super Cleaner and rinse with water before treatment.
Method: Apply Stain Remover with a brush, sponge or rag in a circular motion. Leave for 10 minutes and rinse with fresh water. Tips: Mixing - Mix and shake well. Important information: Product temperature must be between 5°C and 35°C. Ambient temperature must be between 5°C and 35°C. Substrate temperature must be between 5°C and 35°C. Compatibility/Substrates: Suitable for gelcoat and painted surfaces. Number of coats: 1 Application methods: Brush/Rag/Sponge.
- Deep-acting reactive gel
- Suitable for gelcoat, metal and painted surfaces
- Removes dirt around the exhaust pipe and rust stains, yellowing, oxidation and scuff marks from gelcoat surfaces quickly and effectively
- No need to scrub surfaces
- Size 0.5 liters.
Self-adhesive silicone tape that can be used as emergency insulation in heating and water systems.
- 25mm/3m
- Operating temperature -50C - +260C
- Water pressure insulation 85psi
- Topcoat red (RAL 3000) pigment color
- Combine with topcoat repair agent
- Contains 20ml
- Red (RAL 3000) color
Alkyd-based semi-gloss anti-rust paint. Primer and topcoat in one product. Adheres well to iron, steel, aluminum, galvanized and galvanised surfaces. Coverage: 7.5 m2/0.75 ml.
- 1-component
- Suitable for iron, steel and aluminum
- Semi-gloss anti-rust paint
International Perfection is a two-component polyurethane paint for painting boat decks and upper hulls. The highly durable and glossy coating retains its color and gloss for up to 5 years. Suitable for wood, fiberglass, steel and aluminum surfaces over a suitable primer. Can be applied by brush, roller or spray, coverage approx. 12 m²/liter. For use above the waterline only.
- Two-component polyurethane paint, color Lauderdale Blue
- Extremely durable shine and color retention - up to 5 years
- Suitable for wood, fiberglass, steel and aluminum (over the correct primer)
- For use above the waterline - brush, roller or spray
- 200 ml
- 1L
Interstrip is designed for removing single-component boat paints, such as enamels, antifouling paints, primers and varnishes.
- Gel-like consistency stays on vertical surfaces
- Does not damage aluminum, gelcoat, wood or two-component paints
- Removes anti-fouling paint layer very effectively
