International Stain Remover Cleaner, 500ml
- Deep-acting reactive gel
- Suitable for gelcoat, metal and painted surfaces
- Removes dirt around the exhaust pipe and rust stains, yellowing, oxidation and scuff marks from gelcoat surfaces quickly and effectively
- No need to scrub surfaces
- Size 0.5 liters.
An effective cleaning gel that absorbs and removes stains and yellowing from gelcoat and paint surfaces.
Reactive formula - cleans without rubbing or scratching. Gel-like formula - stays on vertical surfaces.
INSTRUCTIONS FOR USE
Pre-treatment: To avoid scratches caused by dirt, clean the surface with Super Cleaner and rinse with water before treatment.
Method: Apply Stain Remover with a brush, sponge or rag in a circular motion. Leave for 10 minutes and rinse with fresh water. Tips: Mixing - Mix and shake well. Important information: Product temperature must be between 5°C and 35°C. Ambient temperature must be between 5°C and 35°C. Substrate temperature must be between 5°C and 35°C. Compatibility/Substrates: Suitable for gelcoat and painted surfaces. Number of coats: 1 Application methods: Brush/Rag/Sponge.
Prodnr: 9519215280
Manufacturer prodnr: YMB822/500BA
Accessories
- Deep-acting reactive gel
- Suitable for gelcoat, metal and painted surfaces
- Removes dirt around the exhaust pipe and rust stains, yellowing, oxidation and scuff marks from gelcoat surfaces quickly and effectively
- No need to scrub surfaces
- Size 0.5 liters.
An effective cleaning gel that absorbs and removes stains and yellowing from gelcoat and paint surfaces.
Reactive formula - cleans without rubbing or scratching. Gel-like formula - stays on vertical surfaces.
INSTRUCTIONS FOR USE
Pre-treatment: To avoid scratches caused by dirt, clean the surface with Super Cleaner and rinse with water before treatment.
Method: Apply Stain Remover with a brush, sponge or rag in a circular motion. Leave for 10 minutes and rinse with fresh water. Tips: Mixing - Mix and shake well. Important information: Product temperature must be between 5°C and 35°C. Ambient temperature must be between 5°C and 35°C. Substrate temperature must be between 5°C and 35°C. Compatibility/Substrates: Suitable for gelcoat and painted surfaces. Number of coats: 1 Application methods: Brush/Rag/Sponge.
Prodnr: 9519215280
Manufacturer prodnr: YMB822/500BA
Recommended for you
CONTACT INFORMATION
STORES
Veneentekijäntie 3
00210 Helsinki (Lauttasaari)
FINLAND
mon–fri 9–18
sat 9-15
sun closed
VANTAA
Porttisuontie 13
00120 Vantaa (Porttipuisto)
FINLAND
mon–fri 10-18
sat 10-15
sun closed
COMPANY INFORMATION
Company ID 1827467-5
Founded in 2003
