Wood care products

Epifanes Classic Mahogany Stain is a mahogany-colored stain. The product is solvent-thinned. Suitable for 1-component and 2-component Epifanes varnishes. Use only on parts above the water stain.

For leaks in wooden boats. Elastic, thick, rubber-based. Farm 50 is intended for sealing small gaps.

For leaks in wooden boats. Elastic, thick, rubber-based. Farm 80 is intended for sealing medium-sized gaps.

Golden Teak 3, from the German company Höveling Yacht Farben, is a teak oil sealer, a long-term treatment for teak decks/details that gives a golden surface.
For gentle and effective cleaning before treatment, use Brunsåpa.

Golden Teak 3 Sealer is a sealer, a thin and non-sticky liquid (unlike oils from other manufacturers) to preserve the golden shine of new teak.

Use:

The treatment is performed on refinished teak or freshly sanded teak for best results. At the beginning of the season, you can take 180 grit sandpaper and gently sand away any stains before treating the surface with Golden Teak Sealer.

If the teak is very worn or greyed, you can use Golden Teak 1 Cleaner and Golden Teak 2 Brightener before applying Golden Teak 3 Sealer.

In the first year, two thin layers are applied with a drying time of two days.

After that, a thin layer is applied every spring.

NOTE: The jar must be shaken before use.

Wash teak regularly with warm soapy water during the season.

NOTE: Do not brush teak with a wire brush.

Stains on plastic can be removed with thinner.

NOTE! The jar must be shaken regularly during long-term storage.

Storage instructions:

• Store protected from frost, preferably at a temperature of 15-20°C.
• An unused jar should be shaken approximately every three months.
• If the oil becomes cloudy, warm the jar in a hot water bath and then shake the jar.
• Minimize oxygen entry into an open jar by pouring the concentrate into a smaller glass jar, filling it completely and sealing it with a lid.
• Also shake this jar regularly to prevent the pigment in the concentrate from settling to the bottom and coagulating.

• Moisten the surface with fresh water.
• Apply a layer of product.
• Apply the powder in an even layer with a brush. The surface must be moistened sufficiently to keep the powder moist.
• After approximately 10-15 minutes, while the powder is still damp, the surface is carefully brushed with a stiff brush. Clean the surface thoroughly with clean fresh water. The treatment can be repeated depending on the painting conditions.
• The product contains acidic components. Stainless steel parts must not come into contact with the product as this may cause discoloration.

Hempel Wood Impreg is a clear alkyd oil with excellent penetration properties. It is used to impregnate wood before applying varnish or paint.

Recommended use:

Product safety:

Handling:

Product information:

Surface Preparation:

Maintenance and Repair:

Diffusion:

Theoretical Yield:

Painting conditions:

Drying and Overpainting:

Other Notes:

Storage:

Special oil for the protective treatment of teak and hardwood. Can be used both indoors and outdoors. Makes it easier to wash and clean all teak surfaces.

• Teak Oil is a deep-acting oil for protecting teak decks and surfaces. Provides a protective and easy-to-clean surface.
• Traditional Scandinavian blend, including linseed oil and chinawood oil for maximum protection
• For teak and other hardwoods, indoors and outdoors.
• Gives shine
• Absorbs even into damp wood.
• Contains rust inhibitors for metal surfaces

INSTRUCTIONS FOR USE:

Teak Restorer for the care of hardwoods. Cleans and highlights the grain of the wood. Restores the original color of teak. Used for decks and interiors. Biodegradable.

• INSTRUCTIONS FOR USE:
  Pre-treatment: Soak the teak with fresh or salt water. If the teak is exceptionally dirty, wash with Super Cleaner before using Teak Restorer.
• Method: Shake before use. Apply a generous amount of Teak Restorer to the surface and leave for 10-15 minutes. Rub across the grain. Repeat if necessary. Rinse with fresh water. Then protect the wood with Teak oil.

NOTE!

• The product temperature must be at least 5°C and not more than 35°C.
• The ambient temperature must be at least 5°C and not more than 35°C.
• The substrate temperature must be at least 5°C and not more than 35°C.

Clear wood impregnation oil for boat wood and hardwood materials with a matte silk finish.

• A transparent, “oily” matte finish, a glossy appearance can be achieved by finishing with Marine D-2 if necessary.
• Does not form a film, does not peel off, does not come off in pieces
• For exterior and interior surfaces – decks, hulls, trim, cockpit, furniture, etc.
• Suitable for all types of wood – teak, mahogany, pine, oak, larch, etc.
• Excellent primer for traditional coatings both above and below the waterline.

• 
  The following jar sizes are available:
• 1 Liter
• 2.5 Liters
• 10 Liters

1-component cleaner and polish for fiberglass surfaces and weathered wood surfaces. Fast-acting.

• Removes surface dirt and soil residue and restores a bright, vibrant appearance to fiberglass surfaces and weathered wood surfaces
• Lightens and restores the original color of grayed wood species without bleaching
• An excellent degreaser suitable for removing grease from tropical wood species before treatment with Marine D-1 impregnation agent.
• Does not damage the wood grain or pattern
• Removes rust stains and neutralizes the effect of Marine Strip
• Removes rust stains from concrete, stone and wood.

High-quality, effective impregnation oil for softwood materials. Colorless, long-lasting oil for wooden structures. Protects, for example, teak boat decks, garden furniture, fences, terraces, etc. Contains UV protection.

• Based on natural oils
• Non-film forming, transparent “oily” matte finish
• Maintains the natural beauty of the wood
• Will not crack or peel
• Does not darken due to UV radiation
• Easy-care surface, no sanding or scraping required
• Suitable for decking, upholstery
• Suitable for most wood species – pine, Souglask fir, larch, etc.

• 
  The following jar sizes are available:
• 1 Liter
• 2.5 Liters
• 10 Liters

• High gloss surface oil for wood. Creates a high gloss mirror finish. Use this as a finishing treatment over Owatrol D-1 impregnation instead of varnish.
  High-gloss surface, enhances the natural beauty of the wood
• Long-lasting flexible film, does not peel off, does not come off in pieces
• Easy to maintain, no need for intermediate sanding between layers
• Suitable for all types of wood – oak, ash, teak, mahogany, larch, etc.
• Exterior surfaces – impact surfaces, handles, cab, booms, masts, etc.
• Interior surfaces – furniture, seating, etc.

• 
  The following pack sizes are available:
  1 liter
• 2.5 liters

• Anti-rust oil that can also be used mixed with paint. Colorless, penetrates directly through rust and isolates rust from healthy metal surfaces.
  Penetrates down to the healthy metal surface and removes air and moisture
• Forms a protective and insulating film that can withstand temperatures up to +175ºC
• Can be used as an additive for oil-based paints, varnishes and stains.
• Mixing ratio: 25% per liter for the first layer or 50% if the surface is smooth or porous
• Makes oil-based paints, varnishes and stains rust-inhibiting, making them easier to apply
• Replaces thinners, does not evaporate
• Increases the opacity of surface treatments
• Basic treatment agent for all surfaces.
• Use on the first floor
• Adheres to all flat surfaces: glass, PVC, ferrous metals and other metals
• It is possible to cover aluminum, galvanized steel and zinc-containing surfaces without pretreatment
• For creating an atmosphere - maintains a rusty look
• Preserves surface rust but protects underneath

• 
  Links:
  Safety data sheet

• 
  Available pack sizes:
  0.5 liters
• 1 liter
• 5 liters

Oil remover and cleaner for all wood materials. Effectively removes old wood oil from deep within the wood. The product is ready to use and easy to apply. Within 10 – 15 minutes the oil has dissolved and can be brushed off. Follow-up treatment is carried out with Owatrol Deck Sealer. Suitable for decks, garden furniture and wood cladding, for example.

• Removes oil and “dirt film” from wooden materials (wooden materials can darken due to inappropriate or insufficient protection)
• Suitable for removing linseed oil, teak oil, etc.
• Cleans traces of stress caused by UV radiation and weather changes
• Deeply cleans and removes darkened oils and stains, making buildup water-soluble
• Neutralize wooden surfaces after treatment with Deck Cleaner, reducing reflective marks left by woodworking visible on new wooden surfaces.

Teak oil, especially for teak decks and garden furniture, protects and enhances wooden surfaces.

• Colorless and odorless – matte appearance
• Maintains the natural beauty of the wood
• Does not form a film, does not peel, does not crack
• Easy to maintain, no scraping or sanding required

The following jar sizes are available:

• 0.5 Liters
• 1 Liter
• 2.5 Liters

A unique teak oil. It is an alternative to Snappy Sealer if you want a deeper, more beautiful and natural color for your deck.

The oil gives a warm, beautiful color and long durability. Only the finest oil is used in the product and effective UV protection against oxidation is added. It then goes through a polymerization process, which results in a 4-6 times longer shelf life compared to other teak oils. Snappy Premium Teak Oil does not darken and is very easy to use. Snappy Premium Teak Oil is also great for teak furniture!