Raymarine Transducers
Raymarine transducers feature a variety of technologies, including different frequency options, CHIRP technology (Compressed High-Intensity Radiated Pulse), DownVision, SideVision, and RealVision 3D. These features enhance the performance, accuracy, and detection capability of the transducer, allowing it to identify underwater objects effectively in a wide range of conditions.Raymarine Transducers -ryhmän tuotteet
Compatible with DSM30 and DSM300 modules.
- Bronze
- Through-hull sensor
- Frequency 200/50 kHz
CPT-100DVS plastic transom mounted Chirp sonar, depth and temperature measurement,
Suitable for direct connection to the following models:
- CP100 and a68
- a78
- a98
- a128
- For eS Series multifunction displays
Cable length:10m
- Plastic transom sensor
- Max depth DV=600 | FF=900
- CHIRP DownVision | CHIRP DownVision / Fishfinder
- Beam width 25°/60°
- Records Depth and Temperature
- Cable length 10m
Direct connection to AXIOM multifunction displays
The Raymarine RV-100 all-in-one transom mount transducer lets you easily identify structure and locate fish with the lifelike clarity of RealVision™ 3D sonar. The RV-100 is a four-channel, wide-spectrum CHIRP transducer with built-in DownVision™, SideVision™, high-frequency CHIRP fishfinding and RealVision 3D™ sonar.
The sensor also features a built-in Attitude Heading Reference (AHRS) system that stabilizes the sonar image by automatically compensating for vessel motion. The image is crystal clear even in rough seas, sea swells, and when the vessel is moving. The RV-100 also features a built-in, fast-response temperature sensor that measures water temperature quickly and accurately.
Designed for easy transom mounting on powerboats, the RV-100 features a durable, marine-grade stainless steel mounting bracket with an impact protection mechanism to protect against impacts from floating debris, rocks, or other objects.
The RV-100 can also be removed from the transom mount and attached to a stainless steel jack plate mount (sold separately), which is ideal for speedboats and flat bottom boats. The RV-100 can also be installed on step-hull vessels using a stainless steel step mount (sold separately)
- 3D transom sensor
- Length: 8m
- Connection: 25-pin
- Plastic sensor
- Steel bracket
- 3D: 300W
- DownVision: 600W
- Port: 300W | Starboard: 300W | Conical: 900W
- Chirp sensor
- Includes adapter cable for Axiom RV devices
- 10m cable
CHIRP transom transducer that displays a 2D image of the bottom. Also detects water temperature.
- CHIRP transom sensor
- Echo / temperature
- 10m cable
- Works directly with Element S devices
- Axiom+ RV requires A80490 adapter cable 9-pin -> 25-pin
The Raymarine CPT-S CHIRP is a plastic, through-hull transducer with a 0° mounting angle and a 10m cable length.
- Plastic feed-through sensor
- Installation angle 0°
- Cable length 10m
- Raymarine product code: E70339
A through-the-bottom transducer made of plastic with a mounting angle of 7-17'. The cable is 10 meters long.
- Plastic feed-through sensor
- Installation angle 7-17'
- Cable length 10m
- Raymarine product code: A80448
A plastic through-hull sensor with a mounting angle of 20'. The sensor cable length is 10 meters.
- Plastic feed-through sensor
- Installation angle 20'
- Cable length 10m
- Raymarine product code: A80447
- Connector: 9-pin
- Beam width: 25°
- Recommended installation angle: 7-17°
- Echo - depth - water temperature
- Cable 10m
Plastic Raymarine transducer for inboard mounting. Mounting angles 0/12/20 degrees.
- Installation method: inside the base
- Mounting angle 0/12/20°
- Plastic
- Cable length 6m
- Raymarine product code: A80691
- With 9-pin connection for Raymarine multifunction displays
- Beam width: 25°
- Recommended installation angle: 15-25°
- Echo - depth - water temperature
- Cable 10 m.
- Length 5m
- DSM for sensors
Instrument sensor converter for STNG network. Wind, echo sounder, compass and rudder angle sensors can be connected to a single iTC-5 converter, eliminating the need for multiple pods. Converts analog instrument data for the STNG bus.
- Expanded SeaTalkNG systems can support multiple iTC-5 units.
- The SeaTalkNG connections on the bottom of the unit connect the iTC-5 unit to the SeaTalkNG backbone cable.
- Please note that the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 will fully calibrate the sensor. The ST70/ST70+ can calibrate depth, wind and speed/temperature sensors (not rudder or compass sensors).
- If your system does not have an ST70/ST70+ or i70 display, the ST40/i40/i50/i60/ST60+ displays should be connected directly to the relevant analog sensors
- Raymarine
- Long sleeve
- Can be used with T910, T911 and T912 sensors
- Through-hull installation
- Plastic
- Power: 600W
- Raymarine product number E66077
- Bottom probe P319
- Max power 600 W
- Compatible frame materials: Fiberglass & Metal
- 50/200KHz
- AXIOM RV multifunction displays require adapter cable (A80489)
- Low profile
- DSM300
- Manufacturer's product number E66013
600W transducer glued to the inside of the hull. Frequencies 50/200 kHz.
- In-hull sensor
- Power: 600W
- Frequencies: 50/200KHz
- Beam 45° / 12° (50/200KHz)
- Cable length 7.5m
- With CP370 connector
- Adapter cable not included.
- Manufacturer's product code: E66008
- Axiom adapter cable A80489
Raymarine P79 bottom-mounted transducer WITH SPECIAL CONNECTOR! The connector is a 5-pin male connector.
- P79 Raymarine
- SPECIAL CONNECTOR! 5-pin male
- Glued to the inside of the base
- 50/200 kHz
- Cable 8m
