SeaTalk ng
Raymarine SeaTalk Ng Network Components. Raymarine uses its own version of the NMEA 2000 network, called SeaTalk Ng (Next Generation). This network is based on the NMEA 2000 standard but uses Raymarine’s proprietary connectors and color-coded cabling for simple installation and reliable communication between devices.SeaTalk ng -ryhmän tuotteet
1.5m SeaTalk alarm cable Fits E-Classic and G-Series models.
Length: 1.5m
Adapter cable for connecting SeaTalk ng and NMEA2000 networks.
- SeaTalk ng backbone cable with Micro-C male connector
- Length: 40cm
Adapter kit for connecting a NMEA0183 network VHF marine radio to the Seatalk ng network.
IN THE PACKAGE:
- 1x R52131 SeaTalk1 - Seatalk ng converter strip
- 2x A06031 SeaTalk ng termination resistor
- 2x A06032 SeaTalk ng dust cover
- 1x A06049 SeaTalk ng power cable
- 1x A06039 SeaTalk ng breakout cable
- 1x A80265
- Adapter Kit
- VHF NMEA0183 -> SeaTalk ng
An adapter with a SeaTalk ng female connector on one end and a NMEA2000 male connector on the other end.
- SeaTalk ng female / NMEA2000 male adapter
- Termination resistor 1pc
NMEA2000 adapter cable
Adapter cable allows you to connect a NMEA2000 device to a Raymarine Seatalk ne network. The cable has a white Seatalk ng connector and a NMEA2000 Micro-C female connector. Cable length 40cm.
- Adapter cable
- Raymarine Seatalk ng / Micro-S female connector
- Length 40cm
- The connectors are only suitable for Raymarine's own Seatalk Ng network
Starter kit for building a Raymarine Seatalk ng network. This kit can connect 2 devices and one slot for the power cable. Can also be used as an expansion part, allowing you to connect 3 devices if the power supply is already in the network. Possible to expand Seatalk-ng with a trunk cable and additional connectors.
In the package:
- 1 x A06064 STNG 5-position network connector
- 2 x A06031 STNG Termination resistor
- 1 x A06040 STNG Branch cable 3m
- 1 x A06049 STNG Power Cable
- This set can connect 2 devices, and one slot is for the power cable
- Can also be used as an expansion unit, allowing you to connect 3 devices if the power supply is already online
- Possible to expand Seatalk ng with trunk cable and additional connectors
- 1 x A06064 STNG 5-position network connector
- 2 x A06031 STNG Termination resistor
- 1 x A06040 STNG Branch cable 3m
- 1 x A06049 STNG Power Cable
A power connector to which you can connect 3 devices if the base unit already has power, or alternatively 2 devices and a power cord.
- 5-port NMEA2000 network connector
- Product code: A06064
- Length: 40cm
- Connectors with 90° angle
Adapter and connection kit for connecting older SeaTalk1 devices to a SeaTalk ng network. Converts old Seatalk1 to NMEA2000 format, meaning you can connect a plotter that supports NMEA2000 to an old Raymarine wind system.
In the package:
- 1 x R52131 ST1 - STng Converter Bar
- 2 x A06031 STNG Termination resistor
- 2 x A06032 STNG Dust cover plug
- 1 x A22164 STNG-ST1 branch cable 1 m
- 1 x A06049 STNG Power Cable
- 1 x A06039 STNG Branch cable 1m
- SeaTalk1 - SeaTalkng
- Adapter and connection set
- Length: 40cm
- 3-pin
- SeaTalk 1 - SeaTalk ng adapter cable
- Power supply for SeaTalk ng network
The SeaTalk NG blank connector fits both white and blue connectors. The cover prevents the connectors from getting dirty.
- SeaTalk ng network backbone cable
- Blue - Blue connector
- Branch cable of the Seatalk ng network
- White - White connector
- SeaTalk ng male / NMEA2000 female adapter
NMEA2000 female adapter cable
Adapter cable allows you to connect a NMEA2000 device to a Raymarine Seatalk ne network. The cable has a white Seatalk ng connector and a NMEA2000 Micro-C female connector. Cable length 100cm.
- Adapter cable
- Raymarine Seatalk ng / Micro-S female connector
- Length 1.0m
- The connectors are only suitable for Raymarine's own Seatalk Ng network
- Adapter Cable
- Raymarine Seatalk/Micro-C Male Connector
- Length 1.0m
- T-connector 1pc
- For one device or power cable
