Solar vents
Solar cell valves are a good solution for boat ventilation that utilizes solar power. With battery-powered models, you can take care of ventilation even when the sun is not shining.Tuoteryhmät
Solar vents -ryhmän tuotteet
Kampanja
Solar-powered fan ventilates moisture and bad odors from the boat. Stainless steel construction that can withstand harsh weather. Can be installed both horizontally and vertically.
- Diameter: 215mm
- Height: 36mm
- Mounting hole: 116-120mm
- Capacity up to 25 m³ per hour
- No battery
Kampanja
Circulates air and prevents mold and humidity. The air conditioner works up to 24 hours without a full charge from sunlight.
- Blowing and sucking
- Rechargeable NiMh battery
- High capacity NiMh rechargeable battery
- No wiring required
- Stainless steel
- 4"
Kampanja
With a rechargeable battery, which allows the fan to operate even in the dark. Built-in power switch. Stainless steel hood and polycarbonate fan case. Simple and affordable design. Up to 30 hours of operation without sunlight. Supplied with two different fan propellers, one for the intake and one for the outlet pipe.
- Total height: approx. 80mm
- Total diameter: approx. 190mm
- Mounting hole diameter: 85mm
Kampanja
With rechargeable battery that also works in the dark, connected with a button. Includes 2 propellers for in/out air. Includes a mounting ring that is used to hide the gap between the fan and the ceiling after installation.
- Diameter: 215mm
- Height: 30mm
- Mounting hole: 116mm
Kampanja
Battery-operated solar-powered valve.
- Solar fan
- 3"
- Stainless steel
- on/off
- With battery
- 2500mAh
- In and out
Kampanja
Spare battery for Marinco solar valves.
- 4,8V
- 2,5Ah
Solar-powered fan from Sunwind. Perfectly fits the commonly used Electrolux valve. Made of UV-resistant ABS plastic. Capacity max. 25m³. Remove the previous cover from the Ejektor valve. Remove the regulator from the open/close valves. Install the Cara Vent Solar in place of the cover. The fan motor starts when it is light. Can also be installed in places where there is no valve. In this case, a lead-in pipe with a diameter of at least 100mm is required. Can be installed horizontally and vertically.
- Improves indoor air quality
- Very quiet
- Easy to install
Kampanja
Sunvent cover valves are powered by a solar cell motor and require little light to operate. The valves are made of stainless steel and are easy to install. The cover valves have a very efficient ventilation capacity.
A low-profile and slightly taller model is available:
Low profile
- Ventilation capacity: 18 m3/h
- Diameter: Ø 215 mm
- Mounting hole diameter: Ø 115-120 mm
- Inner height: 35 mm
- External height: 30 mm
- Weight: 700g
High
- Ventilation capacity: 18 m3/h
- Diameter: Ø 215 mm
- Mounting hole diameter: Ø 116-120 mm
- Inner height: 40 mm
- External height: 50 mm
- Weight: 365g
- Solar cell motor
- Stainless steel
- Two different sizes
