Thinners
Thinners allow you to adjust the fluidity of the paint to suit both the surface being painted and the painting tools.Thinners group products
Epifanes Brush Thinner is intended for Epifanes 1K varnishes and paints. It is well suited for thinning Epifanes clearcoat.
Use:
– Use Epifanes solvent to thin Epifanes clear varnish or Yacht Enamel paint. Thin the varnish by approx. 50% for the first application. By approx. 25% for the second and by approx. 15% for the third. After this, thin Epifanes clear varnish with the final treatments by approx. 0-5% depending on the object and need.
– Also ideal for washing brushes and paintbrushes after using Epifanes products.
Features:
– Epifanes thinner is ideal for thinning Epifanes clear varnish.
– The thinner helps Epifanes clear varnish absorb into the wood better.
ATTENTION:
– Keep out of reach of children.
– Keep away from open flames/hot surfaces. No smoking while handling or near the product.
– Do not breathe product mist/vapor/spray.
– Only use outdoors or indoors with good ventilation.
– Wear protective equipment: Eye/face protection, work gloves and clothing.
Composition and packaging materials:
– Naphtha (petroleum), hydrotreated heavy
- Epifanes 1-K varnish and paint thinner
- Suitable for washing brushes
- Helps the varnish absorb into the wood
- Size options: 0.5 L and 1 L
Antifouling paint thinner specifically for Hempel 1-component paints.
Use only the thinner specified in the product instructions. Otherwise, it may be impossible to achieve a satisfactory finish. Adding thinner can improve the flow of the paint, increase its coverage and enhance its absorption – all of which make working easier. However, if thinner is used in excess of the maximum recommended amount, the effect on the product and the finish may be negative. When paint is thinned, its dry film thickness decreases after the thinners evaporate. Therefore, a second coat of paint may be required to achieve the desired dry film thickness.
Important information: Solvents/thinners from other paints can melt plastics. Make sure that the painting tools and plastic containers you use are resistant to the solvent in question. Do not pour thinners down the drain, but dispose of used thinners according to local waste disposal regulations.
Safety data sheet:
- Hempel antifouling paint thinner
- 0.75L
Hempel one-component primers, topcoats and varnishes thinner
Thinner for 1K paints and varnishes Use only the thinner specified in the product's instructions. Otherwise, it may be impossible to achieve a satisfactory result. Adding thinner can improve the flow of the paint, increase its coverage and enhance its absorption - all of which makes working easier. However, if thinner is used in excess of the maximum recommended amount, the effect on the product and the final result may be negative. When thinning the paint, its dry film thickness decreases after the thinners evaporate. Therefore, a second coat of paint may be required to achieve the desired dry film thickness. Important information Solvents/thinners in other paints can melt plastics. Make sure that the painting tools and plastic containers you use are resistant to the solvent in question. Do not pour thinners down the drain, but dispose of used thinners in accordance with local waste disposal regulations.
Safety data sheet:
- Thinner and tool cleaner
- HEMPEL for single-component primers, topcoats and varnishes
- 0.75L
Hempel thinner for 2-component Light Primer
Two-component products are thinned after the components are combined. Only use the thinner specified in the product instructions. Otherwise, it may be impossible to achieve a satisfactory finish. Adding thinner can improve the paint's flow, increase its coverage and enhance its absorption - all of which make working easier. However, if thinner is used in excess of the maximum recommended amount, the effect on the product and the finish may be negative. When the paint is thinned, its dry film thickness decreases after the thinners evaporate. Therefore, a second coat of paint may be required to achieve the desired dry film thickness. Important information Solvents/thinners in other paints can melt plastics. Make sure that the painting tools and plastic containers you use are resistant to the solvent in question. Do not pour thinners down the drain, but dispose of used thinners in accordance with local waste disposal regulations.
Safety data sheet:
Thinner No. 1 is ideal for use above the waterline. A universal thinner for use with 1-component paints (not antifouling paints) and varnishes.
- Suitable for use with 1-component paints and varnishes
- Suitable for cleaning instruments
- Size: 1L
- Use: above the waterline
- Suitable for thinning
Thinner No. 3 is suitable for use with antifouling paints (except Micron® Optima and VC® products), primers and other specialty paints. It is also used to facilitate the spraying of our 1-component varnishes and paints.
- Package size: 1L
- Suitable for antifouling, primer and other special paints
- Suitable for cleaning equipment related to the above products
- Also used as a spraying aid for our 1-part paints
Thinner No. 7 is specifically designed for thinning epoxy type products including Interprotect® and Gelshield® 200. Can also be used to clean equipment associated with Interfill 830, Interfill 833 and Watertite products.
- Suitable for cleaning instruments
- Compatible with all epoxy-based primers and leveling compounds
- 1L
- Size: 1L
- Special thinner for brush painting of 2-component polyurethane products
Thinner No. 100 is intended for thinning Toplac Plus, Perfection® and Perfection Pro products. It facilitates application of the product by brush at high temperatures.
- Thinner for Toplac Plus, Perfection and Perfection Pro products
- 500ml
Thinner No. 100 is specifically designed for thinning Perfection® and Perfection Pro products. It facilitates brush application at higher temperatures.
- Thinner for Perfection and Perfection Pro products
- 1L
- Size: 1L
- Special thinner for Hard Antifouling and Underwater Primer products
Floetrol is an acrylic solvent that converts water-based paints (including stains) into oil-based paints.
Adding the substance allows for longer drying times and better glide of the paint on the surface to be painted. It also removes brush marks.
- For brush and roller use: add approximately 7-15% per liter of paint
- For spray use: at least 50ml (max 100ml) per liter of paint
