Tools

All 114 parts of the 1852 tool set are packed in a handy and durable case that fits under the bench in a boat, for example, without taking up any extra space. The rounded-cornered case is made of PVC plastic and is just soft enough not to dent or scratch reinforced plastic surfaces. The set includes eight different wrenches and three pliers for different needs, one of which is a very practical sliding-jaw pliers. The increasingly needed Allen keys range from the smallest 1.5 mm to 10 mm.

The combination wrench set ranges from 6 to 22 millimeters, but the real cornucopia is the socket sets. They come in three different sizes for ratchet wrenches. In addition, a separate box of 30 screw heads has the right one for practically every socket.

Small and space-saving 12V vacuum cleaner with a long cord and 12V cigarette lighter connection.

The vacuum cleaner has a removable collector and comes with two nozzles that ensure optimal cleaning on all surfaces.

Specifications:

• Cable length: 4.5 meters
• Suction power: 5000PA
• Power: 70W
• Filter: HEPA filter
• Weight: 610 grams
• Dimensions (L x W x H): 40 x 8 x 8cm

Digital multimeter DT-830B (black) with test leads

The DT830B Digital Multimeter is a compact and lightweight tool - a great option if you need a cheap and reliable meter. The heart of the device is the ICL7106 chip, combined with a large 3 1/2 digit, 7-segment, 0.5 inch high liquid crystal display (LCD) with a maximum reading of 1999.

Instructions

Alternating voltage measurement (ACV)

1. Connect the red test lead to the "V?mA" terminal and the black to the "COM" terminal.
2. Turn the selector switch to the desired V~ position.
3. Connect the test leads to the object to be measured and read the voltage on the LCD display.

Direct current voltage measurement (DCV)

1. Connect the red test lead to the "V?mA" terminal and the black to the "COM" terminal.
2. Select the appropriate measurement range. If the voltage to be measured is unknown, start with the largest range and decrease if necessary.
3. Connect the test leads to the voltage source to be measured and read the value from the display.

Direct current measurement (DCA)

1. Connect the red test lead to the "V?mA" terminal and the black to the "COM" terminal. If the current to be measured is 200mA–10A , connect the red test lead to the "10A" terminal (fuse not protected).
2. Set the selector switch to the desired measuring range.
3. Disconnect the circuit to be measured and connect the test leads in series with the circuit.
4. Read the current value on the display and note the polarity of the red wire.

Resistance measurement ( ?)

1. Connect the red test lead to the "V?mA" terminal and the black to the "COM" terminal (the red lead is positive “+”).
2. Select the desired resistance measurement range.
3. Connect the test leads to the resistance to be measured and read the value from the display.
   Note: If the resistor is part of an electrical circuit, turn off the power and discharge the capacitors before measuring.

Transistor testing

Important! Make sure that the test leads are not connected to other measurement circuits.

1. Turn the selector switch to the hFE position.
2. Determine the type of transistor being tested (NPN/PNP) and the locations of the emitter, base, and collector.
3. Place the transistor legs in the correct holes in the hFE socket.
4. The estimated hFE value is displayed when the base current is 10 µA and Vce is 3V .

Diode testing

1. Connect the red test lead to the "V?mA" terminal and the black to the "COM" terminal (the red lead is positive “+”).
2. Turn the selector switch to the diode measurement position.
3. Connect the red wire to the diode's anode and the black wire to the cathode.
4. The display shows the forward voltage drop of the diode (mV) . If the wires are connected incorrectly, only “1” will be displayed, indicating that the diode is OK.

Battery and fuse replacement

• If "BAT" appears on the display, the battery is dead and needs to be replaced.
• Remove the screws on the back cover, open the case and replace the old battery with a new 9V (6F22 or NEDA 1604) battery .
• If the fuse is blown, open the housing and replace it with a similar one (F250mA/250V) .

Warning!
Before opening the case, make sure that the test leads are disconnected from the measurement circuits. Close the cover and tighten the screws before using the device to avoid electric shock!

Utility knife with lock.

Spark plug wrench

Spark plug wrench for 16 mm and 21 mm spark plugs. Equipped with hex sockets with 3/8 inch drive and rubber plug holder. Articulated shaft and rubber handle make the tool easy to use even in tight spaces. Extension shaft included.

A handy tool bag made of durable material with several practical storage compartments. The outer pocket includes a plastic box, perfect for storing shackles, screws or other small items. The box measures 26x12x4 cm. The bag measures 30x15x22 cm.

A handy tool bag made of durable material with several practical storage compartments. The outer pocket includes a plastic box, which is perfect for storing shackles, screws or other small items. The box measures 26x12x4cm. The bag measures 30x34x23cm.

Cordless, battery-powered wet and dry vacuum cleaner for cars, caravans, motorhomes and boats. Sucks up both dirt and unwanted moisture, such as slippery doormats or the last drops of water on the bottom of a boat. The PowerVac has a 3.8-liter dirt container and an easy-to-clean dirt filter. Comes with a charger, two different nozzles, a shoulder strap and a cable for charging via the car cigarette lighter.