Trolleys and rails
Tuoteryhmät
Trolleys and rails -ryhmän tuotteet
The rail is made of 6061-T6 aluminum and is Hardcoat anodized for durability.
- Screw spacing 100mm
- Fastening screws 5FH
- Rail head H263/ HE2200/ H173/ H446/ H2722
- Association piece H2724
The rail is made of 6061-T6 aluminum and is hardcoat anodized for durability.
- Length 240mm
- Screw spacing 76mm
- Weight 35g
- Fastening screws 5FH
Rail ends for microrail. Groove at the ends for 2:1 rope attachment. Screws not included. Sold in pairs.
- Length 27mm
- Height on top of rail 3mm
- Maximum working load 113kg
- Breaking strength 339kg
- Rail 2707
OUTLET
Trolley with Torlon ball bearings. The trolley's max. working load is 386kg. The trolley is compatible with 22mm rails. The automatic release releases the lock below the wind and thus speeds up the adjustment of the levanki trolley.
- Length 175mm
- Width 78mm
- Weight 702g
- Max. working load 386kg
- Breaking strength 1134kg
- Max. rope 8mm
- Gear ratio 2:1 / 3:1 / H2740
Compatible with 27mm high rails. Plain bearing spinners. Sold in pairs.
- Spinner 40mm
- Length 108mm
- Width 40mm
- Weight 662g
- Max. rope 10mm
- Height on top of rail 25mm
- Max. working load 272kg
- Breaking strength 544kg
- Gear ratio 3:1 / 4:1
Link clamp with stopper.
- Fits 25 mm rail
- Breaking strength: 2560kg
OUTLET
The rail is made of 6061-T6 aluminum and is Harcoat anodized for durability.
The rail has holes for mounting screws and a distance limiter.
- 6061-T6 aluminum
- Harcoat
- Holes for mounting screws
The rail is made of 6061-T6 aluminum and is hardcoat anodized for durability.
- Length 30mm
- Screw spacing 76mm
- Weight 43g
- Fastening screws 5FH
Rail ends for 27mm rail.
- For rail R27
- Sold in pairs
Rail ends for high Micro rail. Groove at the ends for 2:1 rope attachment. Screws not included. Sold in pairs.
- Length 27mm
- Weight 9g
- Height on top of rail 3mm
- Maximum working load 113kg
- Breaking strength 339kg
- Rail 2709
Compatible with 22mm rail. 25mm spool with plain bearing. Sold in pairs.
- Spinner 25mm
- Length 89mm
- Width 38mm
- Weight 126g
- Max. rope 8mm
- Height on top of rail 25mm
- Max. working load 272kg
- Breaking strength 544kg
- Ratio 1:1 / 2:1
Compatible with 27mm rail. Plain bearing reel. Sold in pairs.
- Spin 35mm
- Length 122mm
- Width 45mm
- Weight 554g
- Max. rope Ø 10 mm
- Height on top of rail 36 mm
- Max. working load 816kg
- Breaking strength 1633kg
- Ratio 1:1 / 2:1
End stop, or stopper, that is installed at the ends of a Genoa rail or Scotch rail to prevent a slide or connector in a sliding rail from falling off the rail. The package contains 2 end pieces.
- 25mm rail
- Width: 28mm
- Height: 11mm
The rail is made of 6061-T6 aluminum and is Harcoat anodized for durability. The high rail is intended for use when not all screws can be used. The bottom of the rail has a groove for the screws and they slide freely into the desired positions.
- Weight 1.63kg
- Mounting screws 6mm HH
- Screw spacing slide bolt
- Railhead H1523
- Trim cap H1622
The rail is made of 6061-T6 aluminum and is hardcoat anodized for durability.
- Length 450mm
- Screw spacing 76mm
- Weight 65g
- Fastening screws 5FH
Connector for Micro rails.
- For Track 2707
Compatible with 22mm rail. 25mm spools with plain bearings. Sold in pairs.
- Spinner 25mm
- Length 89mm
- Width 38mm
- Weight 142g
- Max. rope 8mm
- Height on top of rail 41mm
- Max. working load 272kg
- Breaking strength 544kg
- Gear ratio 3:1 / 4:1
Adjustable genoa carriage for 27mm rail. The upper part of the carriage rotates 60 degrees and its spindle is on plain bearings.
- Spindle 57mm
- Length 132mm
- Width 70mm
- Weight 659g
- Max. working load 1043kg
- Breaking strength 2268kg
The rail is made of 6061-T6 aluminum and is hardcoat anodized for durability.
- Length 600mm
- Screw spacing 76mm
- Weight 87g
- Fastening screws 5FH
The rail is made of 6061-T6 aluminum and is hardcoat anodized for durability.
- Length 0.6m
- Screw spacing 50mm
- Weight 129g
- Mounting screws 4mm
- Railhead H2706
- Splice link H2711
