White Shell
White Shell -ryhmän tuotteet

The LED navigation light set manufactured by Talamex has great lights on both sides of the boat
A set of traffic lights with a modern design. Includes both red and green lights. White housings and mounting gaskets are supplied with the lights.
Admitted:
- IMO COLREG 72 standard
- Meets USCG requirements (United States Coast Guard)
- Meets ABYC A-16 requirements ( American Boat and Yacht Council )
- NMMA type approved (National Marine Manufacturers Association)
- Includes red + green light
- White shell
- Waterproof IP67
- Operating voltage: 12V
- Red: 0.14A + green 0.09A
- Minimum visibility: 2NM
- Mounting leg size: L x W x H: 93 x 57 x 36mm
- Manufacturer: Talamex

Attwood LightArmor LED traffic lights are waterproof and highly resistant to corrosion
The top of the light has an indicator light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.
- Light type: Left side
- Color: Red
- Installation: Surface mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- IP rating 67

Attwood LightArmor LED traffic lights are waterproof and highly resistant to corrosion
Attwood LightArmor LED path lights are corrosion resistant and waterproof. (IP rating 67). There is an indicator light on the top of the light that lights up when it is on. The compact size allows for easy installation in tight spaces, and the smooth shape prevents ropes from catching on the light and preventing damage to the light. The colored diodes have a lifespan of over 50,000 hours. Visibility 2NM.
The product is attached with three screws and a gasket is included. Screws are not included in the package.
- Light type: right-hand side
- Color: Green
- Installation: Surface mounting
- Voltage: 12V
- Visibility: 2NM
- Approved to USCG and ABYC A-16 standards.
- Diameter: 60mm
- Height: 32mm

Stylish green LED navigation light with long service life from Hella Marine
Side light red, 2 NM, white shell.Compact surface-mounted LED navigation light for vessels under 12 m. Waterproof construction IP67, antimagnetic. Strong white plastic body. Voltage multivolt 8 – 24 V. Power consumption less than 2 W/pair of lights. Long service life.
Low power consumption
NaviLED lights consume less than 10% of the power of a traditional incandescent navigation light. The port and starboard lights consume less than 2 W in total!
No bulbs, no maintenance, long service life
Hella Marine LED technology – no filaments. NaviLED lights are extremely durable and reliable, and safe even in the most demanding conditions.
Multivolt 9-33 VDC
Advanced control electronics ensure reliable lighting and protection despite wide battery voltage fluctuations or low battery voltage.
Safe and highly visible
Hella Marine optics deliver 100% correct light output and excellent visibility compared to bulb-based navigation lights.
Fully enclosed and sealed design - IP67
The NaviLED light forms a completely sealed unit. Shockproof housings ensure excellent resistance to waves and impacts.
Pre-wired with marine grade cable
The two-conductor (2.5 m) shielded marine-grade cable ensures a completely sealed installation.
- LED traffic light, green
- Material: UV-protected, impact-resistant acrylic lens and durable housing
- Minimum visibility: 2 nm (yachts and motorboats)
- Cable: Pre-wired with marine grade cable
- Operating voltage: Multivolt 9 – 33 VDC (previous version 8 – 28 VDC)
- Surge protection: Voltage spikes up to +500 V. Reverse polarity max. -700 V
- Power consumption: Port, Starboard – Less than 2 W combined.
- Protection class: IP67 – completely sealed
- Weight: 60 g (with 120 mm cable)
- Approvals: BSH, IMO Col Reg 72, USCG, ABYC A-16, Maritime NZ
- Width 71mm
- Height 50mm
- Depth 30mm

NaviLED PRO series navigation lights have been a popular choice for over a decade
The new horizontal deck mount adapter has improved the installation options of the NaviLED PRO series. The lights can now be mounted on horizontal surfaces, expanding installation options and usability on large vessels.
- Install NaviLED PRO lights on horizontal surfaces
- Fits existing product lines such as Port, Starboard, Stern, Masthead, Bi-colour
- Increases the physical appearance of large ships
- Innovative design hides fasteners
- Space for cable entry under the adapter
- UV and impact resistant materials
Note: The light does not come with an adapter.



