Tuoteryhmät
Hempel Multicoat Topcoat and Primer
-15%
- 1-component opaque, semi-gloss alkyd primer and topcoat.
- Suitable for fiberglass, wood and steel surfaces
- Semi-gloss.
- Forms a wear-resistant surface
- Highly resistant to water and oil
- Also suitable for bilge
- Used above the waterline.
Hempel's Multicoat is a one-component, opaque, semi-gloss alkyd primer and topcoat. It forms a durable surface that is weatherproof and has good resistance to water and oil. Suitable for use above the waterline and is also suitable for bilge applications. Minimum application temperature is 5°C.
Recommended use:
On fiberglass, wood and steel surfaces.
For indoor and outdoor use above the waterline.
Product safety:
Flash point: 39°C [102°F].
VOC content (441 g/L): Meets EU requirements.
Handling:
Handle with care. Follow the warning and safety labels on the packaging and paint containers.
Follow local and national regulations during use.
Product information:
Gloss: Semi-gloss
Dry matter content: 46 ± 2%
Specific gravity: 1.2 kg/L [10 lb/US gal]
Dry film thickness, reference: 40 microns [1.6 mils]
Surface Preparation:
Remove oil, grease and other contaminants with a suitable detergent.
New construction: Prepare bare surfaces according to Hempel's priming instructions.
Maintenance and Repair:
Previously treated surface: Sand, clean and dry the surface.
Diffusion:
Thinner: Hempel's Thinner 811 08111 or Hempel's Thinner 808 08081.
Application method and tool: Brush, roller or paint pad.
Thinning max. 5% by volume, not relevant.
Film thickness, dry: 40 microns [1.6 mils].
Film thickness, wet: 90 microns [3.5 mils].
Theoretical coverage: 11 m²/L [450 sq ft/US gal].
Painting conditions:
Apply only to a dry and clean surface with a temperature at least 3°C ??[5°F] above the dew point, avoiding condensation.
The relative humidity must be below 85% during drying and curing.
Drying and Overpainting:
Dry to touch hours: 6 (10°C [50°F]), 3 (20°C [68°F]).
Sanding dry hours: 24.
Overpainting: All masking tape used during paint application must be removed while the coating is still wet.
Notes on overpainting:
If the maximum overcoating time has been exceeded, the surface must be roughened to ensure adhesion.
Storage:
Shelf life: 60 months from date of manufacture in unopened original packaging.
Storage conditions: Store in accordance with local regulations, at a temperature of 5°C [41°F], protected from direct sunlight, rain and snow.
Safety data sheet:
Tuotenr: 150199
Kampanjahinta
From 27,90 €33,00 €/
Yhteensä sis. alv 25.5%
Helsinki LauttasaariAvailable
Vantaa PorttipuistoAvailable
VerkkokauppaAvailabledelivery time 1 - 3 working days
Toimituksen hinta: 5,90 €Matkahuolto's Near Parcel
Lisävarusteet
- 1-component opaque, semi-gloss alkyd primer and topcoat.
- Suitable for fiberglass, wood and steel surfaces
- Semi-gloss.
- Forms a wear-resistant surface
- Highly resistant to water and oil
- Also suitable for bilge
- Used above the waterline.
Hempel's Multicoat is a one-component, opaque, semi-gloss alkyd primer and topcoat. It forms a durable surface that is weatherproof and has good resistance to water and oil. Suitable for use above the waterline and is also suitable for bilge applications. Minimum application temperature is 5°C.
Recommended use:
On fiberglass, wood and steel surfaces.
For indoor and outdoor use above the waterline.
Product safety:
Flash point: 39°C [102°F].
VOC content (441 g/L): Meets EU requirements.
Handling:
Handle with care. Follow the warning and safety labels on the packaging and paint containers.
Follow local and national regulations during use.
Product information:
Gloss: Semi-gloss
Dry matter content: 46 ± 2%
Specific gravity: 1.2 kg/L [10 lb/US gal]
Dry film thickness, reference: 40 microns [1.6 mils]
Surface Preparation:
Remove oil, grease and other contaminants with a suitable detergent.
New construction: Prepare bare surfaces according to Hempel's priming instructions.
Maintenance and Repair:
Previously treated surface: Sand, clean and dry the surface.
Diffusion:
Thinner: Hempel's Thinner 811 08111 or Hempel's Thinner 808 08081.
Application method and tool: Brush, roller or paint pad.
Thinning max. 5% by volume, not relevant.
Film thickness, dry: 40 microns [1.6 mils].
Film thickness, wet: 90 microns [3.5 mils].
Theoretical coverage: 11 m²/L [450 sq ft/US gal].
Painting conditions:
Apply only to a dry and clean surface with a temperature at least 3°C ??[5°F] above the dew point, avoiding condensation.
The relative humidity must be below 85% during drying and curing.
Drying and Overpainting:
Dry to touch hours: 6 (10°C [50°F]), 3 (20°C [68°F]).
Sanding dry hours: 24.
Overpainting: All masking tape used during paint application must be removed while the coating is still wet.
Notes on overpainting:
If the maximum overcoating time has been exceeded, the surface must be roughened to ensure adhesion.
Storage:
Shelf life: 60 months from date of manufacture in unopened original packaging.
Storage conditions: Store in accordance with local regulations, at a temperature of 5°C [41°F], protected from direct sunlight, rain and snow.
Safety data sheet:
Tuotenr: 150199
Katso muut tuotemerkin tuotteet
Suosittelemme sinulle
Maksutavat
