International B-Free Explore Antifouling Paint
- Completely biocide-free. Does not cause harmful emissions to the sensitive aquatic environment.
- The effect lasts for several boating seasons. It is recommended to repaint every two years.
- Suitable for most materials, e.g. gelcoat (gelcoat), aluminum, steel, wood.
- Can be applied over existing, good quality antifouling paint using a conversion coating.
- Easy to clean if necessary with a pressure washer or by wiping lightly with a soft sponge.
- Suitable for use in all water areas.
- The B-Free product family includes three products:
- B-Free Explore antibacterial paint
- B-Free Tiecoat primer/tack coat. Always use as a primer for B-Free Explore antifouling paint.
- B-Free Conversion Coat - insulating paint. Used when you want to paint over an old, existing antifouling paint.
B-Free Explore is a biocide-free antifouling paint for use on underwater parts of boat hulls. When in the water, the paint forms a very slippery and smooth film on the surface, which effectively prevents the attachment of vegetation, while improving the boat's performance and reducing fuel consumption. B-Free Explore provides the same long-lasting protection as regular antifouling paints, but with less maintenance and without the harmful environmental effects of biocides.
Color scheme:
- YBF300 White
- YBF301 Red
- YBF303 Navy
- YBF304 Black
- Gloss: Semi-gloss
- Density: 1 average
- Dry matter content: 71% average
- Shelf life: 18 months
- VOC: 250 g/l average
- Jar size: 750 ml
Drying/topcoating:
Drying:
10°C (50°F): 7 hours
25°C (77°F): 4 hours
35°C (95°F): 2 hours
Dust dry: 7 hours (10°C), 4 hours (25°C), 2 hours (35°C)
Operating time: 4 hours (10°C), 3 hours (25°C), 2 hours (35°C)
Note: BFree Explore / BFree Tiecoat require frequent mixing to avoid surface skinning and achieve a long working life.
Launch times @ 10 35° C:
Min: 24h
Maximum: 1 month
Topcoating:
Substrate temperature:
10°C (50°F) - 35°C (95°F)
To be painted over:
Min: 2 hours (35°C)
Max: 5 days (10-35°C)
Note: Do not apply at temperatures below 10°C. Humidity should be 35–85% during application and drying.
Instructions for use:
Pre-treatment. The base was previously painted with International silicone-based bio-protection products:
In good condition: Wash, high pressure, with Super Cleaner. Repair minor damage with a layer of Tiecoat.
Waterline: Remove growth, wash, sand, and apply a layer of Tiecoat if necessary.
The base was previously painted with a traditional base color:
In good condition: Wash, sand, seal with B-Free Conversion Coat, apply Tiecoat before painting with Explore.
In poor condition: Remove loose paint and treat as necessary.
Clean wood/plywood: Sand lightly with 80-180 grit paper, then 280 grit paper.
Remove sanding dust and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Steel: Degrease with solvent or Super Cleaner.
Sandblast or grind the metal surface smooth.
Clean thoroughly and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Aluminum: Degrease, sand with 24120 grit paper.
Clean thoroughly and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Zinc/galvanized steel: Clean grease, sand with 60120 grit paper.
Clean and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Bare gelcoat/composite/laminate: Clean grease, sand smooth with 80-120 grit sandpaper.
Clean and apply B-Free Explore.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Gelcoat (in good condition): Degrease, sand with 180-220 grit paper.
Clean and apply B-Free Explore.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Lead: Clean grease, sand with 120 grit paper or wire brush.
Clean and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Tips: Mixing: Mix thoroughly until smooth before use.
Thinning: Not recommended.
Cleaning agent: Use International Antifouling Thinner 3.
Ventilation and humidity control: Ensure adequate ventilation during work.
Important information:
Do not paint over 1-component paints.
The temperature of the product and the base coat should be between 10 and 35 °C during application and drying.
To maximize service life, use the correct amount of paint based on coverage.
B-Free Tiecoat contains silicone, so avoid contact with surfaces outside the painting area.
Ensure safety during lifting and transportation by following the recommendations.
Not suitable for propellers. Not for use in Hypalon or PVC inflatable boats.
Tuotenr: 150205
Lisävarusteet
- Completely biocide-free. Does not cause harmful emissions to the sensitive aquatic environment.
- The effect lasts for several boating seasons. It is recommended to repaint every two years.
- Suitable for most materials, e.g. gelcoat (gelcoat), aluminum, steel, wood.
- Can be applied over existing, good quality antifouling paint using a conversion coating.
- Easy to clean if necessary with a pressure washer or by wiping lightly with a soft sponge.
- Suitable for use in all water areas.
- The B-Free product family includes three products:
- B-Free Explore antibacterial paint
- B-Free Tiecoat primer/tack coat. Always use as a primer for B-Free Explore antifouling paint.
- B-Free Conversion Coat - insulating paint. Used when you want to paint over an old, existing antifouling paint.
B-Free Explore is a biocide-free antifouling paint for use on underwater parts of boat hulls. When in the water, the paint forms a very slippery and smooth film on the surface, which effectively prevents the attachment of vegetation, while improving the boat's performance and reducing fuel consumption. B-Free Explore provides the same long-lasting protection as regular antifouling paints, but with less maintenance and without the harmful environmental effects of biocides.
Color scheme:
- YBF300 White
- YBF301 Red
- YBF303 Navy
- YBF304 Black
- Gloss: Semi-gloss
- Density: 1 average
- Dry matter content: 71% average
- Shelf life: 18 months
- VOC: 250 g/l average
- Jar size: 750 ml
Drying/topcoating:
Drying:
10°C (50°F): 7 hours
25°C (77°F): 4 hours
35°C (95°F): 2 hours
Dust dry: 7 hours (10°C), 4 hours (25°C), 2 hours (35°C)
Operating time: 4 hours (10°C), 3 hours (25°C), 2 hours (35°C)
Note: BFree Explore / BFree Tiecoat require frequent mixing to avoid surface skinning and achieve a long working life.
Launch times @ 10 35° C:
Min: 24h
Maximum: 1 month
Topcoating:
Substrate temperature:
10°C (50°F) - 35°C (95°F)
To be painted over:
Min: 2 hours (35°C)
Max: 5 days (10-35°C)
Note: Do not apply at temperatures below 10°C. Humidity should be 35–85% during application and drying.
Instructions for use:
Pre-treatment. The base was previously painted with International silicone-based bio-protection products:
In good condition: Wash, high pressure, with Super Cleaner. Repair minor damage with a layer of Tiecoat.
Waterline: Remove growth, wash, sand, and apply a layer of Tiecoat if necessary.
The base was previously painted with a traditional base color:
In good condition: Wash, sand, seal with B-Free Conversion Coat, apply Tiecoat before painting with Explore.
In poor condition: Remove loose paint and treat as necessary.
Clean wood/plywood: Sand lightly with 80-180 grit paper, then 280 grit paper.
Remove sanding dust and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Steel: Degrease with solvent or Super Cleaner.
Sandblast or grind the metal surface smooth.
Clean thoroughly and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Aluminum: Degrease, sand with 24120 grit paper.
Clean thoroughly and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Zinc/galvanized steel: Clean grease, sand with 60120 grit paper.
Clean and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Bare gelcoat/composite/laminate: Clean grease, sand smooth with 80-120 grit sandpaper.
Clean and apply B-Free Explore.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Gelcoat (in good condition): Degrease, sand with 180-220 grit paper.
Clean and apply B-Free Explore.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Lead: Clean grease, sand with 120 grit paper or wire brush.
Clean and apply Interprotect.
Apply B-Free Tiecoat before final painting with B-Free Explore.
Tips: Mixing: Mix thoroughly until smooth before use.
Thinning: Not recommended.
Cleaning agent: Use International Antifouling Thinner 3.
Ventilation and humidity control: Ensure adequate ventilation during work.
Important information:
Do not paint over 1-component paints.
The temperature of the product and the base coat should be between 10 and 35 °C during application and drying.
To maximize service life, use the correct amount of paint based on coverage.
B-Free Tiecoat contains silicone, so avoid contact with surfaces outside the painting area.
Ensure safety during lifting and transportation by following the recommendations.
Not suitable for propellers. Not for use in Hypalon or PVC inflatable boats.
Tuotenr: 150205
Suosittelemme sinulle
