Simrad NAC-2 VRF CORE PACK

Basic autopilot system components – just add the controller and control panel
Ideal for outboard or sterndrive boats up to 10 meters (35 feet) in length
Compatible with low-flow duty pumps, mechanical actuators, hydraulic linear actuators and solenoid valves
Control via Simrad AP44 autopilot control panel, IS42 display and OP12 keypad or multifunction display connected to the same network
Virtual rudder angle sensor eliminates the need to install a mechanical rudder angle sensor
Easy setup with automatic adjustment and compass calibration
Plug-and-play connectors make installation easy

This kit contains the basic components needed to install a Continuum autopilot system on your boat. The contents of the kit are designed for outboard boats up to ten meters (35 feet) in length. Simply add the appropriate control unit for your steering system and choose a Simrad autopilot control panel or multifunction display.

NAC-2 autopilot basic package

This kit includes a Simrad NAC-2 autopilot computer, a Precision-9 solid-state compass, and all the cables and connectors needed to create a NMEA 2000® backbone or connect the autopilot to an existing NMEA 2000® network. This kit is recommended for outboard boats up to 10 meters (35 feet) in length and is suitable for use with low-flow duty pumps (e.g. Simrad RPU80), mechanical drives (e.g. Simrad SD10), hydraulic linear duty units (e.g. HLD350), and solenoid valves.

Multiple control functions

A wide range of autopilot control panels are available. You can also control the autopilot from your existing Simrad multifunction display. You can install an additional autopilot station, which is a good solution for dual-helm vessels, or control the vessel and autopilot from anywhere on the boat with Simrad's WR10 wireless remote control.

Easy to install and configure

Simrad's Virtual Rudder Feedback (VRF) technology eliminates the need for a mechanical rudder feedback sensor on boats equipped with outboard engines (outboard or sterndrive). VRF technology greatly simplifies autopilot installation and provides uncompromised performance for Continuum steering. Plug-and-play connectors reduce the need for manual wiring and simplify installation. Industry-standard NMEA 2000® connectivity allows for reliable connection of sensors, autopilot control panels and multifunction displays to any location on the boat. Auto-tuning simplifies setup and ensures optimal steering performance, while automatic compass calibration continuously improves heading accuracy during the voyage.

The package includes:

Precision-9 compass
NAC-2 autopilot computer
Micro-C backbone kit

Prodnr: 000-13337-001

Campaign price

1250,00 €

~~1819,80 €~~/ kpl

Total incl. VAT 25.5%

Helsinki LauttasaariOut of stockOut of stocklocation in store: Myymälä / varasto

Vantaa PorttipuistoOut of stockOut of stock

WebshopAvailable on orderdelivery time 3 - 6 working days

Shipping price: 5,90 €Matkahuolto's Near Parcel

Basic autopilot system components – just add the controller and control panel
Ideal for outboard or sterndrive boats up to 10 meters (35 feet) in length
Compatible with low-flow duty pumps, mechanical actuators, hydraulic linear actuators and solenoid valves
Control via Simrad AP44 autopilot control panel, IS42 display and OP12 keypad or multifunction display connected to the same network
Virtual rudder angle sensor eliminates the need to install a mechanical rudder angle sensor
Easy setup with automatic adjustment and compass calibration
Plug-and-play connectors make installation easy

This kit contains the basic components needed to install a Continuum autopilot system on your boat. The contents of the kit are designed for outboard boats up to ten meters (35 feet) in length. Simply add the appropriate control unit for your steering system and choose a Simrad autopilot control panel or multifunction display.

NAC-2 autopilot basic package

This kit includes a Simrad NAC-2 autopilot computer, a Precision-9 solid-state compass, and all the cables and connectors needed to create a NMEA 2000® backbone or connect the autopilot to an existing NMEA 2000® network. This kit is recommended for outboard boats up to 10 meters (35 feet) in length and is suitable for use with low-flow duty pumps (e.g. Simrad RPU80), mechanical drives (e.g. Simrad SD10), hydraulic linear duty units (e.g. HLD350), and solenoid valves.

Multiple control functions

A wide range of autopilot control panels are available. You can also control the autopilot from your existing Simrad multifunction display. You can install an additional autopilot station, which is a good solution for dual-helm vessels, or control the vessel and autopilot from anywhere on the boat with Simrad's WR10 wireless remote control.

Easy to install and configure

Simrad's Virtual Rudder Feedback (VRF) technology eliminates the need for a mechanical rudder feedback sensor on boats equipped with outboard engines (outboard or sterndrive). VRF technology greatly simplifies autopilot installation and provides uncompromised performance for Continuum steering. Plug-and-play connectors reduce the need for manual wiring and simplify installation. Industry-standard NMEA 2000® connectivity allows for reliable connection of sensors, autopilot control panels and multifunction displays to any location on the boat. Auto-tuning simplifies setup and ensures optimal steering performance, while automatic compass calibration continuously improves heading accuracy during the voyage.

The package includes:

Precision-9 compass
NAC-2 autopilot computer
Micro-C backbone kit

Prodnr: 000-13337-001

See other products of the brand

Simrad NAC-2 VRF CORE PACK

NAC-2 autopilot basic package

Multiple control functions

Easy to install and configure

The package includes:

Prodnr: 000-13337-001

NAC-2 autopilot basic package

Multiple control functions

Easy to install and configure

The package includes:

Prodnr: 000-13337-001

Recommended for you

CONTACT INFORMATION

STORES

COMPANY INFORMATION