Victron Energy
Victron Energy -ryhmän tuotteet
Maximum battery current 10A
12V Max 145W
24V Max 290W
Ultra-fast maximum power point tracking (MPPT)
Especially in cloudy weather, when light intensity is constantly changing, a very fast MPPT controller can improve energy use by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Output power
Excessive battery discharge can be prevented by connecting all loads to the load socket. The load connector disconnects the load when the battery has discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be selected: Reference to battery life.
The load connection is short-circuit protected.
Some loads (especially inverters) are best connected directly to the battery and the inverter remote control is connected to the load socket. A special connection cable may be required, see the user manual.
Battery life: Intelligent battery management
When the solar charge controller is not sufficient to charge the battery to full capacity in a day, the result is that the battery constantly cycles from a "partially charged" state to a fully discharged state. This behavior (no regular full charging) will destroy a lead acid battery over weeks or months.
The battery life algorithm monitors the battery's charge status and increases the load shedding level (i.e., cut the load earlier) each day if necessary until the available solar energy is sufficient to fully charge the battery to 100%. From then on, the load level is modulated so that a near 100% charge is reached approximately once a week.
Resin-encased electronics
Protects electronic components from the environment
Automatic battery voltage detection
The MPPT 75/10 automatically switches to 12V or 24V systems.
Batteries AGM, lead and gel
Remote monitoring and control
You can remotely monitor and control the various functions of your Blue Solar MPPT charger by connecting a Bluetooth adapter and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installations – even when there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Wide Area Network) device.
Purchase the Bluetooth Smart Dongle (item no. 70840) and use the Victron app for wireless monitoring.
- 10A
- MPPT technology
- 12/24 volts
Solar panel Victron 12V 185W monocrystalline
Efficient solar panels – a reliable and sustainable energy solution
Victron solar panels are designed to provide optimal performance even in demanding conditions. Thanks to advanced technology and robust construction, they offer high efficiency, long service life and easy installation.
Key features:
Improved performance at high temperatures – Low voltage temperature coefficient ensures better performance even at high temperatures.
Excellent performance in low light – High light sensitivity across the entire solar spectrum ensures efficient energy production even in low light.
Maximum durability – Advanced EVA encapsulation and three-level protection meet high safety requirements for high-voltage connections.
Robust and waterproof – The sealed multi-function junction box ensures better safety and reliability.
Protection against power loss – Bypass diodes minimize power loss caused by shading.
Strength and durability – Anodized aluminum frame allows for easy installation and a long service life.
High-quality tempered glass – Improves light transmission, rigidity and impact resistance.
Fast and secure connection – Pre-installed MC4 connectors (PV-ST01) make installation easy.
Warranty:
25-year limited warranty on power and performance
5-year limited warranty on materials and workmanship
The perfect solution for those looking for reliable, sustainable and efficient solar energy!
Dimensions: 1485 x 668 x 30mm
Rated power: 185W
Peak voltage: 19.68V
Maximum current: 9.41A
Weight: 11kg
- Dimensions: Length 1485mm x Width 668mm x Height 30 mm
- Power: 185W, monocrystalline
- Excellent low-light performance
Victron's 90W is a monocrystalline solar panel designed with advanced features to ensure maximum performance and reliability in all conditions. Optimized performance in extreme conditions: Thanks to a low voltage temperature coefficient, the panels operate efficiently even at high temperatures, ensuring reliable operation in all climates. Exceptional photosensitivity: Victron's panels offer excellent low light performance and high photosensitivity across the entire solar spectrum, ensuring maximum energy output even in low light conditions.
Safety first: The waterproof and multifunctional junction box offers a high level of safety and protection, ensuring long-term and trouble-free operation in all conditions. Effective shadow minimization: High-performance bypass diodes reduce power losses due to the effects of shadowing. Advanced technology for high safety: The three-layer EVA (Ethyl Vinyl Acetate) encapsulation system meets the strictest high-voltage requirements. Durable and impact-resistant construction: These panels are equipped with high-quality tempered glass, which improves rigidity and impact resistance, ensuring long-term and reliable use in all conditions. Quick and easy connection: The high-performance models have pre-drawn quick connection systems with MC4 connectors.
- Dimensions: L 780 x W 668 x H 30mm
- Power: 90W
- hard
- Peak voltage: 19.6 V
- Max current: 4.59 A
- Load 6.1 Kg
The solar charger collects energy from your solar panels and stores it in batteries. Using the latest and fastest technology, Smart Solar maximizes energy collection and intelligently distributes it to fully charge the battery in the shortest possible time. Smart Solar maintains the health of the battery and extends its lifespan.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 15 amps
- Rated power, 12 volts: 220 watts
SmartShunt is a versatile battery monitor that doesn't have its own display, as your phone acts as the display. SmartShunt connects wirelessly via Bluetooth to the VictronConnect App installed on your phone (or tablet). You can conveniently read all the variables you want to monitor, such as battery charge status, available charge (time remaining at current power consumption), historical data and much more.
Alternatively, you can connect the SmartShunt to the GX device and read the data on its display. The connection between the SmartShunt and the GX device is made using the VE.Direct cable.
SmartShunt is a good alternative to the BMV battery monitor, especially in systems where a battery monitor is needed but you want to avoid extra cabling. SmartShunt is equipped with Bluetooth connectivity, VE.Direct bus and a connection that can be used for monitoring a second battery, center point monitoring or to which it is possible to connect a temperature sensor.
- Battery monitoring
- 300A/50mV
- The phone acts as a display
- Capacity: 110Ah
- Voltage: 12V
- Cold cranking current: 500 A
- 400 charge cycles at 80% discharge
- 600 charge cycles at 50% discharge
- 1500 charge cycles at 30% discharge
- Width: 330mm
- Length: 171mm
- Height: 220mm
- Manufacturer: Victron Energy
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 10 amps
- Rated power, 12 volts: 145 watts
MPPT controller with built-in Bluetooth. Automatically selects 12 or 24 V as the voltage to be used. Max. panel power with 12 V battery is 440 W, with 24 V battery the max. panel power is 880 W.
Fully programmable Victron Energy MPPT controller. Automatically selects 12 or 24 V as the voltage to be used. The charge can be fed to the controller with a maximum voltage of 100 V and the controller utilizes very fast MPPT charging technology. Maximum charging current 30 A. The controller can be combined with other Victron Energy products.
- Protection against incorrect polarity
- Temperature compensated charging
- Can be used in conjunction with Victron Colour Control
- Suitable for AGM batteries
- Excellent choice for boat or caravan use
- Built-in Bluetooth ensures data viewing and programming via smartphone. With the app, you can see, among other things, real-time charging data from the solar panel and historical data going back 30 days.
- Manufacturer: Victron Energy
- MPPT controller with built-in Bluetooth
- Automatically selects 12 or 24 V as the operating voltage
- Maximum panel power with a 12V battery is 440 W
- Maximum panel power with a 24V battery is 880 W
Low-cost PWM (Pulse Width Modulation) controller. Internal temperature sensor. Three-stage battery charging (bulk, absorption and float charging). Overcurrent protected. Short-circuit protected. Reverse polarity protection when connecting to solar panels and/or battery. Low output voltage disconnection.
• 10A
• PWM technology
• 12/24 volts
The solar charger collects energy from your solar panels and stores it in batteries. Using the latest and fastest technology, Smart Solar maximizes energy collection and intelligently distributes it to fully charge the battery in the shortest possible time. Smart Solar maintains the health of the battery and extends its lifespan.
MPPT: Ultra-fast Maximum Power Point Tracking
By continuously monitoring the voltage and current of the solar panels, MPPT technology ensures that every drop of energy in the panel is captured and stored. This advantage is best seen when it is partly cloudy outside and the brightness is constantly changing.
Remote monitoring and control - built-in Bluetooth
You can remotely monitor and control the various functions of your Smart Solar MPPT charger by connecting via Bluetooth and connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) web portal, you can access the full power of your MPPT anytime, anywhere, and both services are free. For remote installation – even if there is no internet connection or phone coverage nearby – you may be able to monitor your MPPT by connecting it via Bluetooth to an optional LoRaWAN (Long Range Broadband) device.
Load output
The smart load output function prevents damage from discharged batteries. You can set a voltage level at which Smart Solar will disconnect the load, thus preventing unnecessary discharge of your batteries. And here comes the smart part: Smart Solar tries to reach a hundred percent charge every day. If this is not possible - during bad weather - the device increases the cut-off voltage level daily until it succeeds. We call this feature BatteryLife because it maintains the health of the battery and extends its service life.
Functions
Very fast maximum power point tracking (MPPT).
Advanced maximum power point detection in case of partial shading.
Excellent conversion efficiency.
Natural convection cooling.
Automatic battery voltage detection.
Flexible loading algorithm.
Overheating protection and power reduction at high temperatures
- Max current: 20 amps
- Rated power, 12 volts: 290 watts
The Smartshunt 300A IP65 is a battery monitor that uses your phone as a display instead of an integrated screen. The Smartshunt connects to the VictronConnect app on your phone or tablet via Bluetooth, allowing you to check all monitored battery parameters such as charge status, remaining time, history data and more.
Smartshunt 300A IP65 can also be connected and read via a GX device. Connection to the Smartshunt is easy with a VE.Direct cable.
The Smartshunt is an excellent alternative to the BMV battery monitor, especially in systems where battery monitoring is required but where you want to reduce cables and clutter. It is equipped with Bluetooth, a VE.Direct port and a connection that can be used to monitor a second battery, a midpoint monitor or a temperature sensor.
- Waterproof IP65 rating
- 300A/50mV
- The phone acts as a display
The Smartshunt 500A IP65 is an all-in-one battery monitor where your phone acts as a display instead of an integrated screen.
Smartshunt connects to the VictronConnect app on your phone or tablet via Bluetooth and you can read all monitored battery parameters such as charge status, remaining time, historical data and more.
Smartshunt 500A IP65 can be connected and read with a GX device. Connection to the Smartshunt is easily done with a VE.Direct cable.
Smartshunt is a good alternative to the BMV battery monitor, especially in systems where battery monitoring is required but less cables and clutter are desired.
Smartshunt is equipped with Bluetooth, a VE.Direct port and a connector for monitoring a second battery, center point monitoring or temperature sensor.
- Mains voltage range: 6.5 - 70 VDC
- Power consumption: <1 mA
- Input voltage range, auxiliary battery: 6.5 - 70 VDC
- Battery capacity (Ah): 1-9999 Ah
- Operating temperature range: -40 - +50°C
- Measure voltage second battery or temperature or center zone: Yes
- Temperature measurement range: -20~+50°C
- Victron Energy direct communication port: Yes
- Dimensions (HxWxD): 46x120x54 mm
- Shunt connection bolts: M10
- Protection class: IP65
- Combined inverter and charger
- Inverter 700W
- Charger 35A
Adjustable stabilized output voltage (10-15 volts) for devices that require a constant operating voltage. Suitable for "ground" devices that operate on 12.0 volts, but cannot withstand the engine charging voltage, e.g. certain LED lights, television, 4G router, etc.
Can also be used as a battery charger for trickle charging, e.g. charging a 12V starter battery or an additional battery in the system. Short-circuit protected and can be paralleled to increase output current. Unlimited number of devices can be connected in parallel.
With the remote control, no high-voltage switch is required for the input cables. The remote control can be controlled with a low-voltage switch or, for example, the motor on/off switch. IP43 protection: When the device is installed with the screw fasteners facing downwards.
• 110W
• 12 volts
• 100x113x47mm
The Blue Smart IP22 Charger is a new professional charger with Bluetooth connectivity. The Blue Smart IP22 Charger can be used in vehicles (such as classic models), motorcycles, boats and caravans.
- Bluetooth
- 3 starts
- Suitable for Lead and Lithium batteries
With built-in Bluetooth, the BMV Smart is ready for networking (IoT). Bluetooth is implemented in most other Victron Energy products, so wireless communication between products simplifies system installation and improves performance.
In addition to the basic display options of voltage, current, and amp-hours used, it also displays the charge status, remaining time, and power consumption in watts for battery bank 1. For battery bank 2, it only measures voltage.
Features:
Displays battery voltage, amps, amp hours, consumption and charging status.
Displays the remaining time at the current discharge rate
Programmable visual and audible alarms
Programmable relay (for shutting down non-critical loads or starting the generator when needed)
VE.Direct communication port
Records a large number of historical events that can be used to assess consumption patterns and battery health
Wide voltage range 9.5–95 V
Current measurement with high resolution rendering. 10mA (0.01A)
Low power consumption: 0.7Ah per month (1mA) @12V and 0.6Ah per month (0.8mA) @24V
Number of batteries: 2
Includes 500 amp shunt and connection kit
• Battery monitoring
• 2 batteries
• Programmable relay
The Cyrix battery combiner is a relay that connects two battery banks in parallel when one battery is being charged. The Cyrix detects when the voltage rises, indicating that charging current is present, and connects the batteries. It also isolates the batteries when the voltage drops. The Cyrix is ??microprocessor controlled and also takes into account the voltage trend before connecting/isolating. 13-13.8V is required for connection and 11-12.8V for isolation, depending on the voltage development.
Cyrix ensures that all batteries are charged when, for example, the generator is running and also ensures that you do not disconnect the starter battery when there is no charging current. If the starter battery has been disconnected for some other reason, it is possible to connect all batteries for jump starting.
This relay does not cause voltage drop and is an excellent alternative to diode isolators.
• Maximum current: 120A (180A for five seconds)
• Height: 46mm
• Width: 46mm
• Depth: 80mm
• Weight: 0.11Kg
Smart charger functions! The Phoenix Smart Charger IP43 is a six-stage charger that takes care of your batteries safely and gives them optimal charging.
With built-in Bluetooth, this wireless charger offers ease of use for charging batteries. Here are some features that make it an essential tool for boaters and other enthusiasts:
- Smart charging options for every need:
- Smart (1+1): Dual outputs for two battery banks. The second output is for the starter battery and provides up to 4A.
- Customized charging for batteries as needed:
- 6-stage customizable charging algorithm: From bulk charging to storage, each stage is automatically optimized to extend battery life.
- Variable Absorption Time: Adapts to the usage situation to prevent overcharging and maximize battery life.
- Protect your batteries with smart safety features: BatterySafe Mode: Prevents damage due to gassing by automatically adjusting the voltage rise. Storage Mode: Minimizes gassing and corrosion when the battery is not used for 24 hours, extending battery life.
- Remote control and monitoring via Bluetooth.
- Bluetooth Control: Complete control over voltage and current via Bluetooth directly from your phone.
With up to 50A charging capacity, our Smart IP43 charger offers a versatile and intelligent solution for all your charging needs.
Power cord must be purchased separately.
- 50A/12V
- Smart & Bluetooth
- 2 outputs
- For lead and lithium batteries
VictronConnect allows you to view real-time status information and configure Victron products that either have built-in Bluetooth or are connected to a VE.Direct Bluetooth Smart adapter. The app is available for IOS, Android, Mac and Windows.
- 375W
- 12 volts
- 86x165x260mm
Orion-Tr Smart 12/12-18A (220W) is an isolated DC-DC adaptive 3-phase charger with built-in Bluetooth.
Remote control: With a remote control, a high-voltage switch is not required for the input cables.
The remote control can be controlled with a low-voltage switch or, for example, with the motor's on/off switch.
- Adjustable output voltage: 10-15V
- Short-circuit protected
- Can be connected in parallel
- IP43 protection when the device is installed with the screw fasteners facing downwards
- No special tools required for installation
- Input fuse
- Built-in Bluetooth
- Voltage range: 8-17V
- Output voltage adjustment range: 10-15V
- Continued. output power at 40°C: 220W
- Dimensions (hxwxd): 130x186x70mm
- Weight: 1.3Kg
- For lead and lithium batteries
