Anchor winches

Complete anchor winch package 1000W: Delivered as a ready-made package that includes the parts required for installation, such as control, fuse and cabling.

For boats up to 15 meters: Powerful 1000W solution for medium-sized boats, up to approximately 15m / 50 feet.

For indoor installation, flexible placement: The motor and pulley can be installed freely at a 360° angle, making it easier to find a suitable installation location on the boat.

Easy-to-use functions for anchoring: Equipped with auto-stop, free-fall function and PWM controller for power control.

Safe and controlled operation: Starting requires pressing two buttons simultaneously, which reduces the risk of accidental starting. Free fall allows for controlled lowering of the anchor.

The Sleipner Maxi 43 1000W is an inboard anchor winch that makes anchoring easier and more controlled. The motor and pulley can be mounted at any angle within a 360° radius, making it easier to find a practical place for the winch in the boat. In the Maxi 43 model, the pulley is located on the starboard side, looking towards the direction of travel of the boat.

The Sleipner Maxi 43 is a more powerful alternative to the Sleipner MIDI 600W anchor winch, for example. It is suitable for larger boats, frequent anchoring or when a more robust solution for indoor installation is desired.

Functions and use

The free-fall function allows the anchor to be lowered quickly. The pulley also provides light resistance, keeping the fall controlled. This also helps to avoid unnecessary slack in the rope.

The anchor windlass has an automatic stop with a sensor that detects when the anchor is up. The windlass first stops in the flushing position, and with a second push the anchor is raised completely. A small brass ring is installed on the rope, which activates the automatic stop sensor.

The PWM controller takes care of power regulation and control of the winch electronics. Starting requires pressing two buttons simultaneously, which acts as a safety feature and reduces the risk of accidental starting.

When is the Sleipner Maxi 43 KIT 1000W a good choice?

The Sleipner Maxi 43 KIT 1000W is suitable for the boater who needs a complete rope anchor winch package for indoor installation and wants an efficient solution for a boat up to 15 meters. It is also a good choice when the installation location requires flexible placement, as the motor and rope pulley can be installed at a 360° angle.

The Maxi 43 is especially suitable for users who value fast anchor lowering, controlled operation and an automatic stop that makes it easier to raise the anchor back up.

Package contents
Anchor winch
Rope frame feedthrough
PWM controller
Automatic fuse 150A
Control panel 70x70mm, gray
Cables 7m

Product dimensions:

• D: 25–50mm
• D: 150mm
• F: 250mm
• G: 90mm
• H: 62mm
• I: 114mm
• W: 217mm
• M: 152mm

Cable recommendation:

• 0–12m: 16mm²
• 12–20m: 25mm²

Product dimensions:

• D: 18–35mm
• E: 111mm
• F: 221mm
• G: 75.5mm
• H: 43mm
• I: 82mm
• W: 175mm
• M: 122mm

Quick anchor winch package

Package includes:

• Relay
• Bracket (for transom)
• Control panel
• Fuse
• Hitchhiking

Can be supplemented with the following:

• Cable set
• Anchor/rope/roller
• Remote control

Specifications:

• Voltage: 12V
• Motor power: 600W
• Chain size: 12-14mm
• Recommended boat length: 6-10 meters
• Maximum load: 200 kg
• Maximum speed: 25-28 m/min
• Weight: 12.4 kg
• Recommended fuse: 60A

Supplied with relay and mounting screws, but needs to be supplemented with the following:

• Fuse 100A
• Control panel
• Power cables
• Anchor/chain/reel
• Remote control (optional)

Specifications:

• Voltage: 12V
• Motor power: 1500W
• Maximum load: 470kg
• Maximum speed: 39.2 m/min
• Weight: 20.4 kg
• Recommended fuse: 100A

Anchor windlass package from Quick. The anchor windlass is intended to be installed inside the transom, but it can also be installed in other locations, as the engine can be tilted in 45 degree increments. Installation is flexible. The anchor windlass comes in X and Y models, which means that the line cabin is either on the right or left side of the engine - when the anchor windlass is installed on the transom. This package includes the X model, where the line cabin is on the left side of the engine. When installing, there must be enough space on the side of the line cabins and under the engine, which determines the best option for your boat, regardless of which side the anchor windlass is installed.

Model: Quick Balder XS1200 (1200W)

X model with the in-line cabin on the left side of the engine

Recommended boat length: 11-14 meters

Lead rope diameter: 12-14 mm

The anchor winch has a free-fall function that quickly releases the anchor and allows it to run freely until stopped to prevent the boat from moving from the anchoring position (can be switched off if necessary).

The package includes:

Relay

Bracket (transom mounting)

Control panel

Fuse 80A

Automatic stop

Can be supplemented with the following (see accessories):

Cable set

Anchor/rope/bearing

Remote control (optional)

Specifications:

Voltage: 12V

Motor power: 1200W

Maximum load: 420kg

Maximum speed: 30m/min

Weight: 19.2kg

Recommended fuse: 80A

See the pictures for an explanation of the dimensions.

Quick Balder XS600 anchor winch

Quick anchor winch package. The winch is intended to be mounted inside the transom, but it can also be mounted in other locations, as the angle of the motor can be adjusted in 45 degree increments. This means that the installation is flexible. The winch motor is available in X and Y versions, which means that the rope sheave (pulley) is located on the left or right side of the motor – when viewed from the back of the boat, for example from the swim platform. This package includes the X version, where the rope sheave is on the left side of the motor. When installing, you must ensure sufficient space both next to the rope sheave and under the motor. This will determine which version best suits your boat, regardless of which side the winch is installed on.

• Model: Quick Balder XS600 (600 W)
• X version with pulley on the left side of the engine
• Recommended boat length: 6–10 meters
• For lead core rope 12–14 mm

The anchor winch has a free-fall function that quickly releases the anchor and allows it to run freely until it is stopped. This prevents the boat from drifting away while anchoring (the function can be switched off if desired).

Package contents:

• Relay
• Bracket (transom bracket)
• Control panel
• Fuse
• Automatic stop
• Available as accessories (see accessories):
• Cable set
• Anchor/rope/reel
• Remote control (optional)

Anchor windlass package from Quick. The anchor windlass is intended to be mounted inside the transom, but it can also be mounted elsewhere, as the engine can be tilted in 45 degree steps. Installation is flexible. The anchor windlass comes in X and Y models, which means the sheave is on the right or left side of the engine - considering that the winch is mounted on the transom. This package includes the X model, where the sheave is on the left side of the engine. When installing, there must be plenty of space next to the sheave and under the engine, which determines the best model for your boat, regardless of which side you install the anchor windlass.

Model: Quick Balder XS900 (900W)

X model, pulley on the left of the engine

Recommended boat length: 9-12 meters

Lead rope size: 12-14 mm

The anchor windlass has a free-fall function that quickly releases the anchor and allows it to move freely until it stops, preventing the boat from moving away from the anchorage (can be switched off if necessary).

The package is delivered including:

Relay

Mounting foot (transom mounting)

Control panel

Fuse

Automatic stop

Can be supplemented with the following (see accessories):

Cable set

Anchor/rope/roller head

Remote control (optional)

See pictures for dimensions.

Stainless steel anchor windlass kit with built-in chain counter. The included WHC040 remote control is a wireless remote control with a chain counter and function to control the bow thruster and two bow thrusters. It gives you full control and access to many functions, such as chain speed, or displaying the current operating voltage. The remote control is easy to charge with a wireless fast charger and has a backlit LCD display that is easy to read and use. The device can be mounted internally (transom or bulkhead mount) in a box, or on the deck.

Powerful, yet very compact anchor windlass.

The package includes:

• anchor windlass
• wireless remote control with chain counter
• control box (solenoid) and release handle.
  

Can be added:

• Control panel
• Cabling
• Circuit breaker 100 amps
• Chain
• Anchor turning
• Anchor roller
• Anchor.

Cable recommendation: 0-12m 25mm², 12-20m 35mm² See user manual.

This includes:

• Anchor winch with cable and solenoid
• Wireless remote control
• Rope 30m
• Wire for anchor attachment
• Control panel on the winch

Can be supplemented with the following products:

• Fuse 20A
• Anchor

Comes with relay and mounting screws. It must be completed with the following:

• Fuse 80A
• Control panel
• Power cables
• Anchor/chain/roller
• Remote control (optional)

A streamlined 100% AISI316 deck unit, a fixed under-deck motor, motor overload protection, anchor lock and a competitive price make the V700 anchor windlass a worthy product.

Max. boat size approx. 30'
Motor: 300W, 12V
Lifting capacity: max. 320 kg
Lifting speed: 25 m/min
Loaded 79 kg
Max speed 20m/min
Chain 6 mm DIN 766
Rope 12 - 14 mm, can be combined with chains.

New anchor windlass with a deck unit made of stainless steel.

Features

• Manual override function
• Sprocket locking option
• Solenoid, fuse and toggle switch are included in the price.

Lewmar S2000 stern anchor winch, suitable for boats up to 48 feet.

• Anchor windlass designed for stern anchoring
• Automatic free fall and auto-stop lifting function as standard
• Strong, high-quality mounting bracket for easy installation
• Rope pulley for 12 - 16 mm lead rope
• 2 models, up to 48 feet boats

Lewmar S2000 stern anchor windlass, suitable for boats up to 48 feet. Designed for stern anchoring, it features automatic free fall and auto-stop lifting as standard. Comes with a strong and high-quality mounting bracket for easy installation. Sheave for 12 - 16mm lead rope.

The product includes an anchor windlass, solenoid, fuse and lever switch.

Specifications

• Power: 1000W
• Max: 910 kg
• Gross weight: 420 kg
• Lifting speed: 18 m/min
• Amps: 100 A
• Weight: 19.9 kg