Battery Accessories

High-quality battery terminal connectors in a set that includes both positive (+) and negative (-) terminal connectors, made of durable brass for good conductivity and corrosion resistance.

Adjustable stabilized output voltage (10-15 volts) for devices that require a constant operating voltage. Suitable for "ground" devices that operate on 12.0 volts, but cannot withstand the engine charging voltage, e.g. certain LED lights, television, 4G router, etc.
Can also be used as a battery charger for trickle charging, e.g. charging a 12V starter battery or an additional battery in the system. Short-circuit protected and can be paralleled to increase output current. Unlimited number of devices can be connected in parallel.

With the remote control, no high-voltage switch is required for the input cables. The remote control can be controlled with a low-voltage switch or, for example, the motor on/off switch. IP43 protection: When the device is installed with the screw fasteners facing downwards.

VE.Direct cable is available in various lengths. In addition, models are available with either a 90-degree angle connector or a straight connector.

VE.Direct cable is available in various lengths. In addition, models are available with either a 90-degree angle connector or a straight connector.

VE.Direct cable is available in various lengths. In addition, models are available with either a 90-degree angle connector or a straight connector.

Battery mounting kit. Nylon strap with stainless steel tension buckle and strap cover fasteners. Strap length 96 cm and width 25 mm.

Cable cutter for cables with a cross-section of up to 16mm². The tool is suitable for multi-strand copper cable. Designed for one-handed use. Equipped with plastic-coated handles and a reversible mechanism.
Length: 165mm
Cable area: 0.5-16mm²
Maximum cable diameter: 8mm

With this cable cutter you can cut even the strongest cables with a cross-section of up to 95 mm². The tool can be used for: Copper cable, aluminum cable, coaxial cable. The tool is suitable for both solid and multi-strand and fine wires. Designed for one-handed use with plastic-coated handles.

• Length: 215mm
• Cable area: 0.5-95mm²
• Maximum cable diameter: 18mm

An indispensable component in all professional marine power systems. Prevents electrolytic corrosion and ensures the safety of the electrical system. The toroidal core transformer technology ensures quiet operation and high efficiency. The soft start circuit ensures that the shore power circuit protection does not trip when the transformer is connected to the shore power supply.

Battery holder, made of strong black plastic that is also resistant to corrosive substances. Contains no metal parts that can rust or straps that will fade. Comes with two strong nuts and a height-adjustable crossbar to hold the battery in place. Made in the USA and meets ABYC Standard E-10 and US Coast Guard requirements.

Battery holder, made of strong black plastic that is also resistant to corrosive substances. Comes with a height-adjustable crossbar to hold the battery in place. Meets ABYC Standard E-10 and US Coast Guard requirements.

The solar panel charger collects energy from the solar panels and stores it in the batteries. With the latest and fastest technology, Smart Solar maximizes the energy collection and intelligently transfers it to the battery for full charging in the shortest possible time. Smart Solar maintains the battery condition and extends its service life.

MPPT: Ultra Fast Maximum Power Point Tracking

By continuously monitoring the voltage and current output of the solar panels, MPPT technology ensures that every bit of energy available from the solar panels is utilized and stored. This benefit is most noticeable in partly cloudy weather, where light intensity is constantly fluctuating.

Remote monitoring and control - built-in Bluetooth

You can remotely monitor and control the Smart Solar MPPT charger's various functions by connecting via Bluetooth and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) online service, you will have full access to the MPPT's features anytime, anywhere, and both services are free. In the case of a remote installation - even when there is no internet connection or phone signal nearby - you may be able to monitor the MPPT by pairing it via Bluetooth with a LoRaWAN (Long Range Wide Area Network) device, which is available as an accessory.

Load output

The smart load output function prevents damage caused by battery discharge. You can set the voltage level at which Smart Solar disconnects the load and thus prevents unnecessary battery discharge. And here comes the smart part: Smart Solar tries to reach 100% charge every day. If that is not possible - during bad weather - the device increases the cut-off voltage daily until it succeeds. We call this function BatteryLife because it maintains the health of the battery and extends its service life.

Specifications:

Maximum current: 30 amps
Rated power, 12 volts: 440 watts

Features:
- Very fast Maximum Power Point Tracking (MPPT).
- Advanced Max Power Point Detection in case of partial shading.
- Excellent conversion efficiency.
- Natural convection cooling.
- Automatic detection of battery voltage.
- Flexible loading algorithm.
- Overheating protection and power reduction at high temperatures.

Orion-Tr 24/12-9A (110W) is an isolated DC/DC converter. With the remote control, a high-voltage switch is not required in the supply cables. The remote control can be controlled with a low-voltage switch or, for example, a motor on/off switch. Adjustable output voltage: 10-15V Short-circuit protection IP43 protection when the device is mounted with screws facing down No special tools required for installation Input fuse Technical data: Voltage range: 16-35V Output voltage adjustment range: 10-15V Continuous output current at 25°C: 110W Dimensions (wxhxd): 100x113x47mm Weight: 0.42kg

The solar panel charger collects energy from the solar panels and stores it in the batteries. With the latest and fastest technology, Smart Solar maximizes the energy collection and intelligently transfers it to the battery for full charging in the shortest possible time. Smart Solar maintains the battery condition and extends its service life.

MPPT: Ultra Fast Maximum Power Point Tracking

By continuously monitoring the voltage and current output of the solar panels, MPPT technology ensures that every bit of energy available from the solar panels is utilized and stored. This benefit is most noticeable in partly cloudy weather, where light intensity is constantly fluctuating.

Remote monitoring and control - built-in Bluetooth

You can remotely monitor and control the Smart Solar MPPT charger's various functions by connecting via Bluetooth and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management (VRM) online service, you will have full access to the MPPT's features anytime, anywhere, and both services are free. In the case of a remote installation - even when there is no internet connection or phone signal nearby - you may be able to monitor the MPPT by pairing it via Bluetooth with a LoRaWAN (Long Range Wide Area Network) device, which is available as an accessory.

Load output

The smart load output function prevents damage caused by battery discharge. You can set the voltage level at which Smart Solar disconnects the load and thus prevents unnecessary battery discharge. And here comes the smart part: Smart Solar tries to reach 100% charge every day. If that is not possible - during bad weather - the device increases the cut-off voltage daily until it succeeds. We call this function BatteryLife because it maintains the health of the battery and extends its service life.

Specifications:

Maximum current: 30 amps

Rated power, 12 volts: 440 watts

Features:

- Very fast Maximum Power Point Tracking (MPPT).
- Advanced Max Power Point Detection in case of partial shading.
- Excellent conversion efficiency.
- Natural convection cooling.
- Automatic detection of battery voltage.
- Flexible loading algorithm.
- Overheating protection and power reduction at high temperatures.

This Victron adapter cable allows you to transfer data from all your Victron devices to the NMEA2000 system. Via NMEA2000, all data is available for display on a chartplotter or other displays that support the NMEA2000 protocol. All Victron devices with a VE.Can output can be connected directly to the NMEA2000 network using this cable.

The VE. Direct Bluetooth Smart adapter allows you to view your BMV or MPPT data on your iOS or Android devices using the Victron Connect app. Wirelessly displays information such as battery status and solar panel strength, as well as other useful information.
The dongle can read data from the BMV-70x series (battery monitors), Phoenix inverters with VE.Direct port, MPPT Solar Charge Controllers (except 150/70 and 150/85) with VE.Direct communication port and the blue Smart port. IP65 charger.
The Victron VE.Direct Bluetooth Smart dongle uses Bluetooth Low Energy technology.

Lashing straps with clips. For securing batteries, tanks, etc.

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT solar chargers. When installed, the voltage and temperature sensor will charge batteries better, improve charging efficiency and extend battery life.

Improves battery charging
By measuring the voltage at the battery bank terminals, you can avoid errors caused by voltage drop due to cable resistance and thus ensure the correct charging voltage.

For lead-acid batteries, battery temperature information is used to adjust the charging voltage: cold batteries require a higher charging voltage and warm batteries a lower charging voltage. For lithium batteries, battery temperature information is used to stop charging when they are too cold. Charging a lithium battery at or below freezing can permanently damage the cells.

Bluetooth
The connection between Smart Battery Sense and one or more solar chargers is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart.
The transmitted data can be used simultaneously by one, two or more solar chargers connected to the same 12V, 24V or 48V battery bank. The Smart Network is configured using the VictronConnect app.

Clean, simple – smart
Installation is simple, quick and clean. Simply connect the two loops of the device to the battery terminals and attach the Smart Battery Sense device directly to the battery with the Velcro.

Lashing strap 1.36m + fasteners. For securing batteries, tanks, etc.