Mercruiser other spare parts

E cog MerCruiser Alpha One Gen II and Bravo

Genuine MerCruiser E-pin for locking the oil line through the shield. The E-pin ensures that the gear oil line is securely held in place and prevents it from moving during operation. Proper fastening is important to keep the oil system tight and reliable.

Compatibility

Fits the following MerCruiser drives and serial numbers

Alpha One

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type E cotter pin

• Application: oil pipe locking in a protective shield

• Genuine MerCruiser spare part

Additional information

• OEM number 87843

It is a good idea to check the condition of the oil pipe lock during maintenance, as a missing or damaged E-pin can cause oil leaks and damage to the drive unit.

Cardan bellows MerCruiser Alpha One Gen II

Genuine MerCruiser driveshaft bellows for Alpha One Gen II drives. The driveshaft bellows protect the driveshaft and driveshaft from water and dirt, and their condition is critical to the reliable operation of the drive.

The bellows must be completely sealed and should be replaced regularly according to the engine maintenance schedule. The delivery includes bellows adhesive for installation.

Compatibility

Fits the following MerCruiser Alpha One Gen II drives

• Alpha One Gen II 1991–1995

  • Serial numbers 0D469859 – 0F679999

• Alpha One Gen II 1996–1997

  • Serial numbers 0F680000 – 0K999999

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Product information

• Product type cardan bellows

• Includes bubble glue

• Genuine MerCruiser spare part

• OEM number 816431A1

Regular inspection of the bellows and timely replacement prevent water from entering the drive unit and prevent costly damage.

Oil filter MerCruiser CMD 2.0, 2.8 and 4.2

Genuine Mercury MerCruiser integrated oil filter for a range of 2.0, 2.8 and 4.2 litre diesel engines. The filter ensures clean engine oil and effective lubrication, which is essential for reliable engine operation and long service life. O-rings included.

The oil filter should always be replaced when changing the oil and according to the engine maintenance schedule.

Compatibility

Fits the following MerCruiser engines

CMD QSD 2.0

• NO 115 88200000 – 88200999

• NOT ES 130 88205000 – 88205098 and 88206000 – 88206398

• NOT ES 150 88220000 – 88220298 and 88221000 – 88221798

CMD QSD 2.8

• NOT ES 170 88300000 – 88300099 and 88300400 – 88300453

• NOT ES 210 88305000 – 88305102 and 88305400 – 88305798

• NOT ES 220 88300000 and newer

• NOT ES 230 88310000 – 88310153 and 88310400 – 88310997

CMD QSD 4.2

• NO ES 270 88400000 – 88404999

• NO ES 320 88405000 – 88416999

• NOT ES 350 88416000 – 88419999

CMD 2.8

• ES 100 88005272 – 88005276

• NO ES 170 88005200 – 88005518

• NOT ES 200 88010000 – 88012420

Attention
Please check engine serial number, OEM number or filter dimensions before ordering. Some 4.2L engines use alternative filters with part numbers 81992 or 81998.
Not suitable for TDI V6 and V8 engines. For TDI engines use part number 81996.

Specifications

• Product type oil filter

• Genuine Mercury MerCruiser spare part

• OEM number 895207

• Weight 0.113 kg

• Length 9.21 cm

• Width 8.89 cm

• Height 13.97 cm

Regular oil filter replacement ensures clean engine lubrication and reliable operation under all operating conditions.

Fuel filter MerCruiser QSD 2.0, 2.8 and 4.2

Genuine Mercury MerCruiser fuel filter with water separator for QSD series diesel engines. The bottom of the filter can be opened, allowing water to be removed from the fuel. Since water is heavier than diesel, it collects at the bottom of the filter and can be easily emptied.

The fuel filter should be replaced according to the engine maintenance schedule. A clogged filter can cause malfunctions or engine damage. Before installation, it is recommended to lightly lubricate the sealing ring with oil.

Compatibility

Fits the following MerCruiser engines

CMD QSD 2.0 NO

• 115 88200000 – 88200999

• 115 88200499 – 88500999

• 130 88205000 – 88205098

• 130 88205099 – 88205999

• 150 88220000 – 88220298

• 150 88220299 – 88220999

• 170 88230000 – 88230999

CMD QSD 2.0 ES

• 130 88206000 – 88206398

• 130 88206399 – 88219999

• 150 88221000 – 88221798

• 150 88221799 – 88229999

• 170 88231000 – 88239999

2.0L NO

• 115 70294910 – 70377490

• 130 70000000 – 70002129

• 150 70015460 – 70017409

• 170 70024870 – 70026629

2.0L ES

• 130 70002130 – 70015639

• 150 70017410 – 70024869

• 170 70026630 – 70105129

CMD QSD 2.8 NO

• 170 88300000 – 88300099

• 210 88305000 – 88305102

• 220 88300000 and newer

• 230 88310000 – 88310153

CMD QSD 2.8 ES

• 170 88300400 – 88300453

• 210 88305400 – 88305798

• 220 88300000 and newer

• 230 88310400 – 88310997

CMD QSD 4.2 NO

• 270 88400000 – 88400999

• 320 88405000 – 88416999

• 350 88416000 – 88416999

CMD QSD 4.2 ES

• 270 88401000 – 88404999

• 320 88406000 – 88415999

• 350 88417000 – 88419999

Specifications

• Product type fuel filter with water separator

• Genuine Mercury MerCruiser spare part

• OEM number 879172104

• Weight 0.63 kg

• Length 19.06 cm

• Width 10.8 cm

• Height 8.28 cm

Regular fuel filter replacement improves engine reliability and prevents fuel system problems.

Cardan bellows MerCruiser Alpha One Gen I

Genuine MerCruiser drive shaft bellows for Alpha One Gen I drives. The drive shaft bellows protects the drive joint and drive shaft from water and debris entering the drive. The condition of the bellows is very important for the operation and service life of the drive.

The bellows must be completely sealed, and it is recommended to replace it regularly according to the engine maintenance schedule. It is recommended to use bellows glue, sold separately, during installation.

Compatibility

Fits the following MerCruiser drives and engines

• Alpha One Gen I 1983–1990

• TR and TRS 1977–1993

• 120 and 140 1978–1982

• 165 1978–1981

• 898 1978–1982

• 260 1978–1982

• 470 1978–1982

  • Serial numbers 4893835 – 6225576

• 485 1980–1982

• 228 1978–1982

Product information

• Product type cardan bellows

• Application: drive shaft and drive joint

• Genuine MerCruiser spare part

• OEM number 60932A4

• Previous OEM number 60932A1

Regular inspection of the bellows and timely replacement prevent water from entering the drive unit and help avoid costly repair damage.

Universal relay Mercury and MerCruiser

Universal relay for Mercury and MerCruiser engines. The relay can be used as both a starter and trim pump relay, and is also called a solenoid. The relay was originally used in older MerCruiser trim pumps from 1974-1976, but is now widely used as a universal relay in both Mercury MerCruiser engines and many other sterndrive and inboard engines.

If the starter motor or trim pump is not working properly, this relay could be a possible cause of the problem.

Compatibility

• Mercury and MerCruiser sterndrives and inboard engines

• Suitable as starter and trim pump relay

• Universal solution for multiple engines

Product information

• Product type relay solenoid

• Application starter and trim pump

• Distance between mounting holes approx. 55 mm

• Width approximately 7 mm

• Original equivalent spare part

Additional information

• OEM number 25661T1

• Previous OEM numbers 256611 and 25661

In the event of electrical system malfunctions, it is worth checking the condition of the relay, as a faulty relay can prevent starting or the trim system from functioning.

Trim cylinder protection plugs MerCruiser Alpha One Gen I and Bravo 5 pcs.

Protective plugs for MerCruiser trim cylinders. The set includes five protective plugs and is intended for Alpha One Gen I and Bravo I, II and III drives. Genuine MerCruiser spare part that protects the trim cylinder heads from dirt, moisture and damage.

It is a good idea to check the condition of the protective plugs regularly and replace them if necessary to keep the trim system in good condition.

Compatibility

Fits the following MerCruiser drives and serial numbers

Alpha One

• Alpha One Gen I 1983–1990 all models

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type protective plug for trim cylinder

• Quantity 5 pcs

• Genuine MerCruiser spare part

• OEM number 14842

• Previous OEM number 148421

Protective plugs help extend the life of trim cylinders and improve the reliability of the drive unit.

Seawater hose for MerCruiser Alpha One drives

Seawater hose for MerCruiser Alpha One drives. Genuine MerCruiser spare part that ensures reliable operation of the cooling system and prevents water from entering the wrong places.

It is important to check the condition of the hose regularly, as a damaged or frayed hose can cause water leaks and serious damage to the engine or drivetrain. If the OEM number is not known, it is a good idea to measure the diameter of the hose before ordering.

Compatibility

Fits the following MerCruiser drives

• Alpha One Gen I 1983–1990

• Alpha One Gen II 1991–1995

  • Serial numbers 0D469859 – 0F679999

• Alpha One Gen II 1996–1997

  • Serial numbers 0F680000 – 0K999999

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Product information

• Product type seawater hose

• Application: seawater suction

• Inner diameter 19 mm

• Genuine MerCruiser spare part

Additional information

• OEM number 8M0215001

• Previous OEM number 8M0109048

Regular hose inspection and replacement, if necessary, helps prevent water damage and ensures safe operation of the engine and drivetrain.

Exhaust bellows MerCruiser Alpha One and Bravo

Genuine MerCruiser exhaust bellows for Alpha One and Bravo drives. The exhaust bellows safely directs exhaust gases out through the drive and is an important part of the proper operation of the engine and drive.

The bellows should be replaced regularly according to the engine maintenance instructions. A worn or damaged exhaust bellows can cause water leaks and other serious damage. Delivery includes bellows adhesive for installation.

Compatibility

Fits the following MerCruiser drives and serial numbers

TR and TRS

• TR and TRS 1977–1993 all models

Alpha One

• Alpha One Gen I 1983–1990 all models

• Alpha One Gen II 1991–1995

  • 0D469859 – 0F679999

• Alpha One Gen II 1996–1997

  • 0F680000 – 0K999999

• Alpha One Gen II 1998 and later

  • 0L100040 and newer

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type exhaust pipe bellows

• Includes bubble glue

• Genuine MerCruiser spare part

Additional information

• OEM number 8M0124227

• Previous OEM numbers 18654A1 and 32734A3

Regular inspection and timely replacement of the exhaust bellows help prevent water damage and ensure the safe and long-lasting operation of the drive unit.

Seawater hose kit for MerCruiser Bravo drives

Seawater hose kit for MerCruiser Bravo drives. A genuine MerCruiser replacement part designed to ensure reliable and leak-tight operation of the cooling system.

The hose kit fits earlier models of Bravo I, II and III towbars. Some later model years may have an alternative hose solution, so if you are unsure of the OEM number, it is recommended to compare the part to the product image. The towbar serial number alone is not always sufficient to identify the correct hose.

The condition of seawater hoses should always be checked during maintenance, as a damaged or worn hose can cause water to enter the drive unit or engine compartment.

Compatibility

Fits the following MerCruiser drives

• Bravo I

• Bravo II

• Bravo III

Especially early models. Newer models may have a different hose design.

Product information

• Product type seawater hose kit

• Application: seawater suction

• Genuine MerCruiser spare part

Additional information

• OEM number 8M0090859

Regular inspection of seawater hoses and replacement if necessary prevents water damage and ensures proper operation of the cooling system.

Trim tab set MerCruiser Alpha One Gen II

Trim pin kit for MerCruiser Alpha One Gen II drives. The trim pin holds the trim cylinders securely in place and is an integral part of the drive's trim mechanism. The kit includes the pin, sleeves, washers and protective plugs.

The kit can be used as both a front and rear trim tab on the drive. Genuine MerCruiser replacement part ensures a precise fit and long service life.

Compatibility

Fits the following MerCruiser drives

• Alpha One Gen II 1991–1995

  • Serial numbers 0D469859 – 0F679999

• Alpha One Gen II 1996–1997

  • Serial numbers 0F680000 – 0K999999

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Product information

• Product type trim pin set

• Application: mounting trim cylinders

• Scope of delivery: pin, sleeves, washers and protective plugs

• Genuine MerCruiser spare part

Additional information

• OEM number 8M0065070

• Previous OEM numbers 864641A24, 18541A75 and 815953T1

Replacing a worn or damaged trim pin ensures safe operation of the trim system and prevents excessive play in the drive.

Driveshaft Bellows for MerCruiser Bravo Drives

Genuine MerCruiser universal joint bellows for Bravo I, II and III drives. The universal joint bellows protects the drive joint from water and debris and is a critical part of the drive's reliable and safe operation.

The bellows must be completely sealed and should be replaced regularly according to the engine maintenance schedule. It is recommended to use bellows glue, sold separately, during installation.

Compatibility

Fits the following MerCruiser drives and serial numbers

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type cardan bellows

• Application: drive shaft

• Genuine MerCruiser spare part

Additional information

• OEM number 8M0062406

• Previous OEM numbers 86840A05 and 86840A3

Regular inspection of the cardan bellows and timely replacement prevent water from entering the drive unit and help avoid costly repair damage.

Thrust bearing MerCruiser Alpha One and Bravo older models

Genuine MerCruiser thrust bearing for older Alpha One and Bravo drives. The thrust bearing supports the drive shaft and is an important part of the smooth and quiet operation of the drivetrain. A worn or damaged thrust bearing often causes excessive noise and can lead to more serious damage if not replaced in a timely manner.

The bearing is supplied with a grease nipple plug as this model has permanent grease. It is recommended to use an alignment tool during installation to ensure correct alignment of the support bearing.

Compatibility

Fits the following MerCruiser drives

• Alpha One 1983–1990 all models

• Alpha One Gen II until 1997

  • Serial numbers up to 0K999999

• Bravo One

  • Serial numbers up to 0F729999

• Bravo Two

  • Serial numbers up to 0F729999

• Bravo Three

  • Serial numbers up to 0F729999

If the drive unit is not listed above, see alternative part number 82134.

Product information

• Product type support bearing

• Application: drive shaft support

• Permanently lubricated structure

• Includes a plug for the grease nipple

• Genuine MerCruiser spare part

Additional information

• OEM number 879194A02

• Previous OEM numbers 60794A4 and 60794A2

A properly installed and aligned thrust bearing ensures a long life for the drivetrain, reduces noise and protects other parts of the drivetrain from wear.

Thrust bearing MerCruiser Alpha One Gen II and Bravo newer models

Genuine MerCruiser thrust bearing for newer Alpha One Gen II and Bravo I, II and III drives. The thrust bearing supports the drive shaft and is a key component in the smooth and quiet operation of the drivetrain. A worn or damaged thrust bearing often causes noise and can lead to more serious damage if not replaced in a timely manner.

The bearing is supplied with a grease nipple plug, as this model has permanent grease. An alignment tool is recommended for installation to ensure the new thrust bearing is correctly aligned.

Compatibility

Fits the following MerCruiser drives

• Alpha One Gen II

  • Model years 1998 and newer

  • Serial numbers 0L100040 and later

• Bravo One

  • Serial numbers 0F730000 and later

• Bravo Two

  • Serial numbers 0F730000 and later

• Bravo Three

  • Serial numbers 0F730000 and later

If the drive unit is not listed above, see alternative part number 82133.

Product information

• Product type support bearing

• Application: drive shaft support

• Permanently lubricated structure

• Includes a plug for the grease nipple

• Genuine MerCruiser spare part

Additional information

• OEM number 879194A01

• Previous OEM numbers 862540A3 and 862540T1

Correct installation of the thrust bearing and engine alignment are crucial to ensuring the longevity and trouble-free operation of the drive unit.

Oil line connector MerCruiser Alpha One Gen II and Bravo

90 degree oil line connector for MerCruiser drives. The connector is installed inside the shield and connects the oil tank to the drive. A genuine MerCruiser replacement part that ensures reliable and tight oil flow in the system.

This connector only fits towbars with a rectangular oil tank . Does not fit models with a round oil tank.

Compatibility

Fits the following MerCruiser drives and serial numbers

Alpha One

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type oil pipe connector

• Structure 90 degree angle connector

• Fits rectangular oil tank

• Genuine MerCruiser spare part

Additional information

• OEM number 861163

It is important to check the condition of the connector during maintenance, as a leaking or damaged connector can cause oil leaks and damage to the drivetrain.

Oil line to gimbal housing MerCruiser Alpha One Gen II

Oil pipe with O-rings for passing gear oil through the shield. Genuine MerCruiser spare part that ensures a safe and tight passage of gear oil between the drive and the oil tank.

If the oil pipe is damaged or the O-rings dry out or wear out, water can enter the drive unit. Therefore, it is important to check the condition of the oil pipe and seals regularly and replace them if necessary.

Compatibility

Fits the following MerCruiser drives and serial numbers

Alpha One

• Alpha One Gen II 1998 and later

  • Serial numbers 0L100040 and later

Bravo One

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Two

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo Three

• 0B664190 – 0F729999

• 0F730000 – 0M100000

• 0M100001 – 0W249999

• 0W250000 and newer

Bravo X and XR models

• Bravo X Four S 0W250000 and newer

• Bravo X One 0M100001 – 0W249999

• Bravo X Two 0M100001 – 0W249999

• Bravo X Three 0M100001 – 0W249999

• Bravo XR One 0L914990 – 0W239999

• Bravo XR One 0W240000 and newer

• Bravo XR Sport 0M970842 and newer

• Bravo XR Sportmaster 0M052945 – 0M906877

• Bravo XR Sportmaster 0M906878 and newer

• Bravo XR Three 0W240000 and newer

• Bravo XR Three 0W250000 and newer

• Bravo XZ One 0L914990 – 0M999999

Product information

• Product type oil pipe to shield

• Includes O-rings

• Genuine MerCruiser spare part

Additional information

• OEM number 861150T02

• Previous OEM numbers 861150A2 and 861150A1

The good condition of the oil pipe and seals is essential for the reliable operation and longevity of the drive unit.

Speedometer pressure hose connector MerCruiser Alpha One Gen II

Genuine MerCruiser speedometer pressure hose connector for Alpha One Gen II drives. The connector transmits water pressure from the drive to the speedometer and is an essential part of the mechanical speedometer's operation.

Please note that this connector only fits earlier Gen II models and is not compatible with newer model year towbars.

Compatibility

Fits the following MerCruiser drives

• Alpha One Gen II 1991–1995

  • Serial numbers 0D469859 – 0F679999

• Alpha One Gen II 1996–1997

  • Serial numbers 0F680000 – 0K999999

Does not fit models after 1997

Product information

• Product type speedometer pressure hose connector

• Application: speedometer pressure system

• Genuine MerCruiser spare part

Additional information

• OEM number 815956A1

A faulty or clogged connector can cause incorrect speed readings, so it is a good idea to check the condition of the part during maintenance and replace it if necessary.

Distributor cap and rotor MerCruiser V6 Thunderbolt IV and V

Distributor cap and rotor kit for MerCruiser V6 engines equipped with Thunderbolt IV or Thunderbolt V HEI ignition systems. The kit includes both parts and is intended for service and maintenance of the ignition system.

Worn or damaged ignition components can cause rough running, jerking, loss of power or difficulty starting. Regular replacement will ensure smooth engine running and reliable operation.

Compatibility

Fits the following MerCruiser engines

• MerCruiser V6 engines

• Thunderbolt IV with HEI ignition system

• Thunderbolt V with HEI ignition system

Attention
Before ordering, please make sure your engine has a Thunderbolt IV or Thunderbolt V HEI ignition system.

Product information

• Product type distributor cap and rotor

• Delivery contents: lid and rotor

• Original equivalent spare part

Additional information

• OEM number 815407T5

• Previous OEM numbers 815407Q5 and 815407T6

Ignition system maintenance is important for engine performance, reliability and fuel economy.

Distributor cap and rotor MerCruiser 3.0L and LX Delta EST

Distributor cap and rotor kit for MerCruiser 3.0L and LX engines with Delco EST ignition system. The kit includes both parts and is intended for service and maintenance of the ignition system.

Worn or damaged ignition components can cause rough running, jerking, loss of power or difficulty starting. Regular replacement will ensure smooth engine running and reliable operation.

Compatibility

Fits the following MerCruiser engines

• 4-cylinder MerCruiser 3.0L and LX engines

• Models equipped with Delco EST ignition system

Attention
Before ordering, please make sure your engine has a Delco EST ignition system.

Product information

• Product type distributor cap and rotor

• Delivery contents: lid and rotor

• Original equivalent spare part

Additional information

• OEM number 811635K2

• Previous OEM numbers 811635Q2, 811635T1 and 811635Q1

Ignition system maintenance is important for engine performance, fuel economy and reliability.

Distributor Cap and Rotor MerCruiser Delta 1998 and newer

Distributor cap and rotor kit for MerCruiser V8 engines with Delco ignition system and manufactured 1998 or later. The kit includes both parts and is intended for ignition system maintenance and reliable operation.

Worn ignition components can cause uneven or jerky running, loss of power, and starting difficulties. Timely replacement will restore engine performance and improve reliability.

Compatibility

Fits the following MerCruiser engines

• MerCruiser V8 engines

• Models equipped with Delco ignition system

• Model year 1998 and newer

Attention
Before ordering, please ensure that your engine has a Delco ignition system. Alternative parts are also available for different ignition systems.

Product information

• Product type distributor cap and rotor

• Delivery contents: lid and rotor

• Original equivalent spare part

Additional information

• OEM number 808483K2

• Previous OEM number 808483Q2

Ignition system maintenance is important for engine performance, reliability and fuel economy.