Plastic Padding 2-component Gelcoat Filler 180ml

Gelcoat Filler putty for gelcoat

High quality putty for gelcoat surfaces and minor damage. The product is excellent for repairing gelcoat surfaces on boats and can also be used to repair minor damage to enamel and sanitary porcelain.

Gelcoat Filler is a two-component polyester filler that stands out for its good mechanical properties and high durability in varying weather conditions. It forms a durable and shiny surface that is easy to sand, polish, wax and paint in the desired color. The end result is waterproof and long-lasting.

Applications

• Boat gelcoat surfaces

• Surfboards

• Plastic baskets

• Enamel surfaces

• Sanitary ware

Features

• Two-component polyester putty

• Suitable for minor damage

• Durable and weatherproof result

• Easy to sand and finish

• Can be painted and polished

• Waterproof surface

Instructions

Preparation

• Rinse the surface clean of salt and impurities with fresh water at high pressure

• Let the surface dry.

• Sand the surface smooth with sandpaper grit 100–240.

• Remove dust by brushing and clean with a degreaser

Dosage

• Mix a quantity of putty about the size of a golf ball, i.e. approximately 40 ml.

• Add 3–4 cm of hardener, or about 2 percent.

• Mix thoroughly until the mixture is smooth and free of air bubbles.

• Use protective gloves and goggles.

• Close the putty and hardener immediately after dispensing to prevent drying.

Dissemination

• Spread with a steel trowel so that the compound also penetrates the sanding patterns.

• Fill to desired thickness, maximum 3 mm

• Let it harden and sand with coarse sandpaper, grit 240–800.

• Finish with finer sandpaper, grit 800–1200

• The best working temperature is around +20 C.

Curing time

• Approximately 40–60 minutes at temperatures above 20 C

Purifying

• Clean tools with ethyl acetate immediately after use

Things to note

• Grease, oil and silicone completely prevent the product from sticking